The footpegs are solidly built, look good and feel great to ride with. They allow for slightly more lean angle due to the lack of sliders underneath the pegs. However, one of the pegs comes loose over time and needs to be periodically tightened. Not a big deal, but that accounts for my 4 star rating.
Easily change from OEM's extreme footpeg to Race ish Image. Basically, just remove the OEM and just replace it. When removing the OEM, it is OK so as not to skip the spring.
Since angle adjustment is possible, it was able to be converted to Rear Sets with slightly raised and backward lowering.
Just a little Length of Footpeg Bar is long? When I tried to walk again, I came to hit my foot, so it might be a little bit shorter.
The footpeg position got higher and it became easier to hold the tank. I also processed Knurl, I feel that there is no feeling of slipping feet.View Detail
I stole it and folded footpeg and bought it.. Even amateurs themselves could install them relatively easily. Split Pin is also attached.. It is good without rattling. The position of footpeg can also be changed to your preferred position if there is Hexagon Nut. With this amount of gold, the atmosphere changed and I'm satisfied with Large. Manual etc.. Because there is absolutely nothing. View Detail
NORMAL was thick and replaced by Shibui. It is exchanging other than Spring by removing NORMAL. Because there are holes in some places Position can be changed subtly? I made it to the position as it is. After all it is better than with Rubber Parenthesis is good. Oh yeah, there is no manual but Split Pin is Quantity : 2pc. Set comes with. I did not look inside the box well I reused it (-_-;)View Detail
I put it on my A7. The rubber of the original footpeg was hard and slippery, and the gold part was badly corroded and dirty, so I decided to replace it with Other Brand Product. It looks similar to the OEM A12 and later and doesn't look out of place when installed. The installation was completely pontoon and no processing was required. I went on a 1000km touring trip after installation and it was comfortable. I have no problem with the function. The price is less than half of OEM, it arrived quickly, and I am very happy with Large. I highly recommend it to everyone.View Detail
I was able to install it without any problems. It was fully compatible with the GPZ900R-A7's Normal step. The spring that came with it was Exactly, but the pin was too long, so I used the Normal spring.View Detail
I bought it for the ninja1000SX 2020. The OEM with Rubber does not have to transmit vibration. I bought it because it is too heavy and the bottom of Boots and the Rubber catches too much on each other. The mounting position of the footpegs can be adjusted so that the space between the footpegs and the Lever is widened, so the feet can be straightened You can now put it down. I chose the Black color to be consistent with the OEM, but the Matte color and the Glossy color are It still leaves me feeling uncomfortable. Installation took a little bit of work to remove the Split Pin, but it only took about 5 minutes to complete. The attached Split Pinetc. will be kept as a spare part, never to be used. I don't know how long Anodized paint will last, but the price is low enough for me to be happy with it.View Detail
I installed it on a 2016 MT25. The installation itself can be done without any problems, but it is much longer than the OEM footpegs and harder to ride. In addition, the installation part protrudes outward and you have to make your foot in the shape of the letter "H" to be able to Shift change or Brake.View Detail
This visor meets all of my expectations for a Shoei product. It looks incredible and vision is excellent. It sits somewhere in the middle in terms of sun protection - excellent in all situations except where the sun is directly in front. This means the visor remains usable in less bright conditions such as riding through areas with lots of foliage whilst still giving the rider protection in most scenarios. View Detail
Fits: HONDA CB400 SUPER FOUR 04 [Frame No.] NC39-1050001 to 1099999 NC39, HONDA CB400 SUPER FOUR 05-21 Frame No.] NC39-1100001 or later NC39, HONDA CB400 SUPER FOUR 06 [Frame No.] NC39-1200001 to 1299999 NC39, HONDA CB400 SUPER FOUR 07 [Frame No.] NC39-1300001 to 1399999 NC39, HONDA CB400 SUPER FOUR 08-21 Frame No.] NC42-1000001 or later NC42
This tail tidy is great. The rear of the bike now looks clean and free from ugly plastic. The reflector does not have to be installed if the owner does not wish it to be. I just needed it for registration purposes. The licence plate LED also looks beautiful at night. View Detail
I changed to the Hurricanes after dropping my bike and bending the stock handlebars. The clip-ons enable a much sportier riding position and feeling of security when riding quickly through corners. They also enhance the look of the bike greatly in my opinion, especially with bar end mirrors! Quality is good and these feel very solid when adequately tightened. View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송