[How is it used? I use it on my Z900. We replaced it because the other company's product we had been using was outside of the Screen, which made us uneasy while driving, and it interfered with the Screen when we fixed the phone.
Was the one you received as per Image? It was just as shown in the Image. I thought it didn't look too cheap.
Was the installation difficult? The installation itself is easy, but in my case, when I installed it as usual, it still interfered with the Screen itself, so I installed it upside down. As a result, this was the right choice, and the mounted phone is now easier to see and Smooth to wear.
How was your experience with it? It has only been running for a short time after installation, but it looks quite good with no blurring. I will use the same product in the future in case of deterioration or accidental damage. Attached to the bar itself is a SP Conecto Smartphone Mount and a USB×2. If you pack it up, you could probably fit at least a WearLOVE LeCamera.View Detail
C90CM In use for CD125Ts There may be some interference with the Visoretc. for installation, so it may be necessary to bend or change the angle. I have used it for about 20000 km and it is sturdy and does not bend or crack when I attach my phone and USB port. If I had to replace it, I might not change it unless it gets too rusty or I get bored. It is just right for general smartphone mounters to be installed. I am using a different type for my CB125Tw and this one is also in use for about 10000km with no problems.View Detail
I bought this to attach my Smartphone Holder. With Mirror mount, it is a little more noticeable. I added Screen after this picture, so it's not so obvious. No visible vibrations, etc., are generated. The installation is done with Mirror, but there is no problem if you tighten it while holding down the Mount.View Detail
I bought this product to install a Smartphone Holder. I chose this product because it is compact and low price. The installation itself was co-tightened to the Mirror, but there is no problem. View Detail
[How is it used? I use it on my Z900. We replaced it because the other company's product we had been using was outside of the Screen, which made us uneasy while driving, and it interfered with the Screen when we fixed the phone.
Was the one you received as per Image? It was just as shown in the Image. I thought it didn't look too cheap.
Was the installation difficult? The installation itself is easy, but in my case, when I installed it as usual, it still interfered with the Screen itself, so I installed it upside down. As a result, this was the right choice, and the mounted phone is now easier to see and Smooth to wear.
How was your experience with it? It has only been running for a short time after installation, but it looks quite good with no blurring. I will use the same product in the future in case of deterioration or accidental damage. Attached to the bar itself is a SP Conecto Smartphone Mount and a USB×2. If you pack it up, you could probably fit at least a WearLOVE LeCamera.View Detail
C90CM In use for CD125Ts There may be some interference with the Visoretc. for installation, so it may be necessary to bend or change the angle. I have used it for about 20000 km and it is sturdy and does not bend or crack when I attach my phone and USB port. If I had to replace it, I might not change it unless it gets too rusty or I get bored. It is just right for general smartphone mounters to be installed. I am using a different type for my CB125Tw and this one is also in use for about 10000km with no problems.View Detail
I bought this to attach my Smartphone Holder. With Mirror mount, it is a little more noticeable. I added Screen after this picture, so it's not so obvious. No visible vibrations, etc., are generated. The installation is done with Mirror, but there is no problem if you tighten it while holding down the Mount.View Detail
I bought this product to install a Smartphone Holder. I chose this product because it is compact and low price. The installation itself was co-tightened to the Mirror, but there is no problem. View Detail
This NGK Moto DX Plug CPR8EDX-9S 95321 is fit for my Honda cb190r. It should be more powerful, durable and reliable than the original spark plug.View Detail
This EBC Sintered HH Brake Pads can provide a strong braking power, but I can hear a little bit strange noise. It perfectly fits my Honda CB190R rear brake.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송