After reading so much good about this ignition I needed to have it ;) It arrived very quickly and I mounted it on the bike. The manual is in Japanese but using translators no problem at all. All parts easy to connect, wiring scheme is easy to understand and makes no problems. The only thing - plugs connection is switched - originally 2nd is now 3rd, 3rd=2nd, 1st=4th and 4th=1st. All rest is easy. I started the bike today and runs very nice and smooth together with CR29 carbs and 0,0 setting. Will need to try other settings and see the difference when the temperature allows ;)
I purchased the SP2 full power kit basically only because the good opinions on the net and thank to the great reviews from other users. The connection was easy but needs proper skills, instruction was in Japanese but thank to the translator it wasn't so complicated to figure out what goes where.Just be careful not to mix up spark plug wires. A small hint: Each coil wires are switched to original connection - originally #3 is now #2 and original #2 is #3, Same goes to #4 and #1.View Detail
This system could mods your bike differently, much torc, more responsive and your bike sounds better. The crank sound really great for my Honda Monkey 125.View Detail
Fits: HONDA XR400 Motard Some models with CDI ignition, HONDA XR250MOTARD Some models with CDI ignition, HONDA SL230 Some models with CDI ignition, HONDA FTR223 Some models with CDI ignition, HONDA CB400SS Some models with CDI ignition
Installed and have started the engine with no problem, unstable RPM after less than 30 seconds, throttle then Misfire ! I have been trying back and forth with the original igniter and SP2 5 times already , the original igniter and cable still work fine after 20 years but SP2 still the same , It doesnt work on 2003 Honda FTR223. What a bad experience. View Detail
I ordered the AS Uotani SPII Power Coils kit from Webike.net and it was delivered in a reasonable time in a well prepared package. No problems at all to receive!!! I have replaced the 15yo coils of my GSX1400 2008 (Special Edition) by the SPII coils with the Power Amplify. The replacement was not difficult (despite the instructions in japanese - tks google translator image). The bike is now running very smoothly. It had worth the investment particularly with the difficulty to find the original parts. But this in fact revealed to be a much better option.I would suggest the supplier to invest in an english version of the product description/instructions. View Detail
About quality and texture The quality of the product is very highAbout the feeling of use I get the impression that idling is stable.Products to buy together Coil cable, bracketDifficulty of installation It can be easily installed by using a 7mm coil cable, or it is not easy to process the cable Cost performance and comparison with other products I used an ig coil and bought it for a startup, but I don't think I felt the difference from the ig coil. The price is twice as high as the components, but it becomes three times more expensiveAbout shipping and packaging It took a week and the packaging is greatAny concerns, cautions, or advice when purchasing I recently changed it to ngk powercable, but I bought it to increase the number of startups, but the app100 exclusive product was expensive, so I bought SPII Universal High Power Coil and Monkey Frame Mounting Bracket together and installed it well. The ngk cable combination was installed well installedView Detail
I use the CR carburetor in my CB750 for some time and it works nice, although the work of the original throttle cables was not so light. I ordered the PEEK link rod after reading a lot of good comments on the Factory Mameshiba site. Mounted it together with the new spring and must say the work is lighter then before, the inner parts of the carburetor as all of metal had great resistance between each other not to mention the wear of each part. Works nice ;)View Detail
Because the SPII ignition sparks my CB750 very well I decided to use it also for my 1988 HONDA CB450S. As this one is using a CDI ignition I decided to use the universal coil set without amplifier. Arrived, mounted into original bracket and sparked right away on cold outside. Revs nicely and I think more smooth and constant than original coil, only thing above 6000 RPM the tachometer jumps up to max... Maybe a resistor will help, must try.View Detail
Last year I have mounted a CR31 for my CB750 RC42, together with some extra parts from Factory Mameshiba, but the throttle feeling with original Honda grip and throttle cables was not satisfying at all, it was stiff, jamming, the original 20 years rubber did not look good. I decided to change for Mameshiba wires and throttle pipe with variable winding. Besides the nice rubber pattern on the grips, the feeling of smoothness raised and variable winding is very useful for the CR31 on daily use. View Detail
Last year the Earl's oil cooler with 13 rows has been fitted into my CB750 RC42 for better cooling. After that I used a PMC protector and last year a Yoshimura original protector was mounted instead. Fitting is very easy and fits the cooler very good (even the curved part). It gives to the cooler a great protection from bugs and flies and the Yoshimura logo looks beautiful over the honeycomb structure. Very nice product with good value as for original Yoshimura should be ;)View Detail
After 20 years from new I finally had to change the clutch in my Honda CB750 RC42. Especially now that I run a Keihin CR31 carb and CBX750 RC17 camshafts it will need a good clutch with this increased power. This FCC clutch kit fits perfect, looks great and I hope it will ride also very good and will meet my expectations. Feeling by hand the clutch lever is smooth, the springs seem to be quite handy and not too hard.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송