Instructions in Japanese only, but the pics were enough to get by. Probably easier since I already fitted an R&G Tail Tidy that was s shocker in terms of leaving all of the wiring exposed and vibrated uncontrollably due to the single flat plate design. Don’t get an R&G for your H2 SX or SX SE!! The Active eliminator is so so much better. And has a proper plug for the number plate light...shame I cut mine off to fit the R&G eliminator!!! This product fits well, looks great and doesn’t vibrate!!!
I fitted an R&G eliminator that cost me over $200 and although it fitted ok, it was essentially just a set of two flat plates that had no cover for electricals. So I had to tape up all of the wiring and was very untidy. The worst was yet to come as the flat plates vibrated terribly. Never happy with the set up!! So I decided to try the Active Tail Tidy. Besides getting instructions in only Japanese, the pictures helped a little and the kit fitted really well and it protects and neatly hides all of wiring, (that took me over 30min to strip off the special waterproof tape I used for the R&G kit). Additionally, the R&G kit had different connectors so I had to cut off the bikes original tail light connector, and guess what... the Active kit had the correct connector!!! So it was a shame that I cut off the original as now I’ve got shitty connectors to fit a great kit. I found that the panniers are now touching the indicators, but I’m going to have a go at bending the side plates slightly forward that should fix this issue easily enough. Stay away from an R$G and get an Active kit !!! View Detail
I looked at the price and bought it because it was cheaper than the Puch and it would pass inspection (some people say it won't pass because the Number standards have changed …). The installation process was easy to understand because the Instruction Manual was enclosed. (I might introduce it on myGarage too.) When I tried to install the H2sx OEM blinker, it was not possible to install the Pannier case, so I bought the Active blinker and installed it including the press-up which took a little time. If you want to use it with Pannier case, I think you have to spend a little bit of money or DIY. However, I am glad I installed it because the Rear Fender area is very refreshing!View Detail
I don't think of attaching the Pannier case to this product at all, because the Pannier case and Blinker hits the gut! So the Pannier case is now covered in scratches I took a 1.5 cm collar and shifted it backwards to make a hole in the License Plate Light with Drill and put Number on it I managed to install the License Plate Light with a bracket, but I was able to do it hELLIP; It took a lot of work to get it into shape here Active, why didn't you consider the Pannier case ( ; ;)View Detail
There are several Fender Eliminators of H2SXSE, but in my case Fitting, Number and Blinker interfere with Fender Eliminator in connection with wearing the GIVI Top case, so existing products are irritating right… Since it was made ACTIVE made at the time of 14R, I purchased it because I got out waiting for commercialization from ACTIVE.
The fitting feeling is as expected, Blinker changed to Slim type, so GIVIFitting did not interfere Limit and was satisfying Large.
In the manual "OEMPannier impossible" Is there a ... If it really can not be installed it may be better to include it in webike's item description. I am irresponsible as Pannier pear.
About quality and texture be of average qualityAbout the feeling of use I had to combine the other kits It is too short to install in ape100Products to buy together 0900-529-10301 Blinker could be installed using Universal BracketDifficulty of installation It's not a perfect product. It's a product that needs to be customizedCost performance and comparison with other products My bicycle dirt tray is made of Takegawa, but I bought it because I thought there would be no big difference between the two products because the price of Takegawa and fenderless products was double, but there were many problems.About shipping and packaging It took a week and the packaging is greatAny concerns, cautions, or advice when purchasing I think this product is suitable for Ape50 It's not a bad product for Ape100, but the blinker position is moved too far back I couldn't install this fenderless product and move the bike behind the bikeView Detail
salut j adore ma 750 heritage et je voulais supprimé ce garde boue moche en plastique j ai voulu l acheté sut un site français mais j ai essayé direct japan et une semaine après je l avais----------------------------------------------------------HelloI love my 750 Heritage and I wanted to delete this ugly plastic mudguard I wanted to buy the French site but I tried direct japan and a week later I had itPowered by Google TranslatorView Detail
我的车子是大贸川崎 Z900 2021款,我在Webike上买了S2品牌的水箱保护盖商品。这个商品的材质是玻璃纤维,凝胶涂层的。贴上这个可以保护水箱在行驶过程中不被石头蹦到产生水箱裂开。我还会跟其他摩友推荐威百客平台,希望威百客商品越来越多,价格越来越优惠。----------------------------------------------My car is a 2021 Jeep Grand trade Kawasaki Z900, I bought a brand S2 tank cover goods on Webike. This product material is fiberglass, gel coat. This paste can protect the tank during travel the tank is not cracked stones produce bounced. I will recommend Viagra 100 passengers platform with other Friends of Mount hope Granville 100 passengers more and more goods, more and more price concessions.Powered by Google TranslatorView Detail
I fitted an R&G eliminator that cost me over $200 and although it fitted ok, it was essentially just a set of two flat plates that had no cover for electricals. So I had to tape up all of the wiring and was very untidy. The worst was yet to come as the flat plates vibrated terribly. Never happy with the set up!! So I decided to try the Active Tail Tidy. Besides getting instructions in only Japanese, the pictures helped a little and the kit fitted really well and it protects and neatly hides all of wiring, (that took me over 30min to strip off the special waterproof tape I used for the R&G kit). Additionally, the R&G kit had different connectors so I had to cut off the bikes original tail light connector, and guess what... the Active kit had the correct connector!!! So it was a shame that I cut off the original as now I’ve got shitty connectors to fit a great kit. I found that the panniers are now touching the indicators, but I’m going to have a go at bending the side plates slightly forward that should fix this issue easily enough. Stay away from an R$G and get an Active kit !!! View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송