I'm very satisfied. The cost of caustic acid is very good, very good. I recommend it to those who are in conflict. It's quick to ship and I like the packaging.
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.
5 / 5
1 구매후기
rating breakdown
5 Stars | 1 | |
---|---|---|
4 Stars | 0 | |
3 Stars | 0 | |
2 Stars | 0 | |
1 Stars | 0 |
I'm very satisfied. The cost of caustic acid is very good, very good. I recommend it to those who are in conflict. It's quick to ship and I like the packaging.
Fits: HUSQVARNA SVARTPILEN 401
필렌 기존바에서 아쉬운 점이 보완된 굵고 긴바여서 폰 거치대나 기타 다른 제품들을 안전하게 장착할수 있어서 좋습니다 기존 바보다 높아 데쉬보드도 편안하게 보이고 탱크백과의 간섭도 없어서 폅합니다 다른분들도 저처럼 생각하는 분들께 추천합니다It is a thick and long bar that compensates for the shortcomings of the existing bar, so it is good to safely mount a phone holder or other products. doView Detail
The guide is too wide for the diameter of the screw. I had to print a 3D washer to center the screw. Lack of spring washer, I had to buy it to avoid unscrewing the screw from vibration. In my opinion, the product should be improved to fulfill it's function.View Detail
이 제품을 장착하면 흔들립니다 특히 진동이 있는 모델들은 더더욱 네비게이션이 흔들들들드들들 거릴거에요 진짜에요 흔들흔들흔들흔들..히잉.. 괜히 샀떠 .. 램마운트나 사야겠다 ..This product is shaky when mounted. Especially with models with vibration, the navigation will be shaken even more. It is real. It is wobbling and wobbling .. Hiking .. I bought it.translated by Google TranslatorView Detail
Mirror mount was the right choice because it is difficult to install Bracket around Handlebar.
The height makes it easy to see your phone.
I was concerned about the fixation force because it moved no matter how hard I squeezed it, but it seems to be Large sturdy for normal driving.
bar to theQuantity:Pair (for Left and Right) It would be nice to be able to change the length by moving it toView Detail
What made you decide to buy?
Before I installed the KawasakiOEMOption Steering Damper on my ZX-6R, I had installed a KIJIMA Handlebar Mount Bracket, but it interfered with the Steering Damper. After considering alternatives to KIJIMA's Mount Bracket, we decided to use KIJIMA's Mount Bracket. WorldWalk:Smartphone Mount bar I met and purchased the product.
How was your experience with it?
Before purchasing, I was disappointed that there was not enough information about the WorldWalk:Smartphone Mount Bar for 6R. I have been using it to hold my cell phone for a long time. I used to use "Oxford:I installed the "Clicker /Handlebar Mounting for Motorcycle" and it is firmly in place and does not interfere with anything else. The OEMMeter is also clearly visible, although the phone can only be mounted sideways.
Unlike KIJIMA's Handlebar Mount Bracket, this bracket is mounted in the upward direction. I was impressed by the manufacturer's skill in measuring the mounting position to maintain a subtle clearance, but there were some disappointing points. The paint job of the bar clamp is perfect, but the finish of the HolderBody is a little bit rough. I thought that it was probably manufactured by a certain Large land … manufacturer. (As a personal opinion)
Regarding installation …]
Remove the OEMHandlebar clampBolt. Once removed, use the supplied aluminum collars to attach the bracket for fixing the holder. This is where the ad-vise comes in. The included M8 bolt is used to secure the bracket and aluminum collar, but if the bolt is tightened at the specified torque, the bracket will move to the tightening side, which will affect later work. First of all, set the quantity:Pair (for Left and Right) The Bracket for fixing the Holder on the left side is temporarily fixed. Next, temporarily fix the Holder to the Bracket for fixing the Holder and attach the bar. (At this time, there are two washers for the Holder. Since the clearance is delicate, do not use washers for temporary fixation, but use Bolt only for temporary fixation.) where the bar Quantity:Pair (for Left and Right) position adjustment and fix the bar firmly to the Holder. (The bar has a hole for drainage! I am at this time using theQuantity:Pair (for Left and Right) and adjusted the bar so that the hole for drainage faces down). After adjusting the position of the Holder and bar, we left them as they were, and set the Quantity:Pair (for Left and Right) Tighten the holder fixing bracket of the "2" at the specified torque. Finally, use the two washers that were removed from the bracket for fixing the holder at the position specified in the Instruction Manual, and tighten the holder with the specified torque. This work was a little difficult because there was not enough information about the WorldWalk:Smartphone Mount bar for 6R in advance, but the work was completed without any trouble. WorldWalk:Smartphone Mount bar is recommended.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송