I didn't have much of a choice (in Sintered Metal) and I bought a DAYTONA Goldenχ... I bought it by mistake in the previous one and I bought it again.
The comparison photo with Fellowed shows that the sbs was replaced after about 6,000 km, but the original Fellowed was replaced after about 6,000 km. It was so thin that it was as thick as a new one.
It has good control, and when I went home yesterday, the road was empty and I was driving a little fast when the light started to change. Can you stop? I grabbed the rear and the front, but it looked tough, so I grabbed the rear more. The braking power is much higher and I can stop with more time.
It's easy to use with Brake, which feels like the more you grip it, the more it works.View Detail
250 cc Front - Although I use both Rear, "easy to handle" I think it is a word of. Brake hose is NORMAL. Brake fluid belongs to elf. It does not mean that the braking force is quite good. Exactly the expression that you stop only for a while holding Lever. Very easy to handle. The first handiness is felt when speed is being adjusted while applying Rear brake at low speed. It is easier to control the speed, so I feel that there is less flattering. If you write like this, you may feel that Brake's effect is weak, but if you grasp it, it will stop firmly. It is Pad that I highly recommend to those who touring the tokotoko and downtown rather than people like GunGun attacking Circuit and Pass etc.. Quantity : 1pc. The picture of the eyes is the Front which ran about 1000 km after installation. The second piece is Rear as soon as it is worn. (After running on a rainy day, please do not worry about dirt ...)
It has nothing to do with the performance of the product, but the sticker attached with extra was a bit dirty. This may be the Point you care about some people haha ??hahaView Detail
It works well, there is no problem without squeaking. Just a little bit more rise than OEM, necessary enough. I think that the control performance was improved with Linear effect.
Gatsun Brake with highly aggressive Pad I like this because I'm dangerous if I'm oneself.
SBS's Sticker also comes with me! I'm a little happy.
Because ninja 250sl is the same Caliper as before and after, it is advantageous to purchase Set.View Detail
It is different from the specifications of the first picture and content. When they explain it in a confusing way and try to return it, they ask me to pay for the delivery feeView Detail
These were the front pads for the FZ8 and I wanted to try the SBS brand to see how they faired against other brands. Finding the correct pads was not super hard at all. I just went on SBS website and put my make and model in and the options were clear to see. I opted for these street excel sintered as they are pretty agressive pads and should work a treat. The cost was really good value and along with the rear pads for this bike already in my basket, I got them all shipped together with a couple of other small parts. Doing it this way, save a few pounds on shipping too. I use EMS as they just get my orders to me fast and efficiently. 5 days from shipping is all it took which is amazing. The pads and all the rest of my order was packed really well and any empty space was filled with bubble wrap for security of the parts. The front pads came in teh shrink wrapped SBS packet. There was no sign of contaminants or brake dust like you get in some ohter brands. The pads have a very coarse sintered material and hopefully will not take too long to bed in. Fitting in no time as I already had the calipers off and ready to go. Next time out, I will be testing these and edit my review. Great job Webike, thank you. View Detail
This was a set that I needed to replace the ones I previously had in the bike. I wanted to try and match the rears with the fronts I was purchasing at the same time but not quite as agressive for the rear as it is not used that much on a track day. Not hard to find the right pads for the rear caliper. I used the tools Webike provide and then cross referenced with Yamaha and SBS websites for my own peace of mind. I had a few other parts in my order including the SBS front pads which I was matching with. Because I combine some of my parts into one order, the cost of shipping is a lot cheaper than getting them individually. EMS is who I use these days as they just get the job done fast and efficiently. My order arrived in 5 days from Webike warehouse sending my order. What's not to love about that. The pads came in a shrink wrapped SBS packet and also Webike secured them in a bubble wrapping for safety and to keep my other parts safe from damage in transit. These pads are a road compound but are plenty for a track day as I personally do not use the back brake a lot anyway. They had a good matieral on the pad, plenty of meat on there for sure. They performed very well even though the conditions on the day weakened as the day went on. I was still very impressed with the pads anyway. Great work Webike, very pleased with this purchase. View Detail
Fits: SUZUKI SV400S 98-99 [Model]SV400W/SW [FNO]VK53A-100001 or later [Location]Rear, KAWASAKI ZXR750 93-95 [Model]ZX750L1/L2/L3 [FNO]ZX750J-030001 or later [Location]Rear, SUZUKI BANDIT250 89-92 [Model]GSF250/N/ZM [FNO]GJ74A-100033 or later [Location]Rear, SUZUKI RGV250 GAMMA 89 [Model]RGV250K/AK [FNO]VJ21A-117639 or later [Location]Rear, SUZUKI RGV250 GAMMA 88 [Model]RGV250J [FNO]VJ21A-100001 or later [Location]Rear
Having heard a lot of good things about the SBS brand of brake pads, I decided it was time to give them a go on a different model. This bike is one of my own which does brake heavy and thought I would try the street excell sintered ones. Finding the correct part for fitment was pretty easy as I visited SBS website and put my model details in. Webike had these in stock and so ordered 2 sets with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days.All was packed really well and did not move during transit, no damage at all. The pads came in their own SBS branded packet and arrived with no chips or any visual damage at all. They feel solid and as they are sintered you can see teh different materials in the pads themselves, I do believe they have a higher than normal high heat resistance. I have not fitted them yet but that will be in the next few weeks. So far though, they look pretty good. Lets hope they perform as they should.View Detail
Never tried this brand before in this bike that is the GSX-R1000. Have tried most other brake pad brands of similar materials but never the SBS brand. Finding the right pads was easy too, see SBS website. Vost of pads is good value. Also bought the front set to make all around same brand SBS. Shipping good value and arrive in less than a week. Fitting was easy as old were already out. The material is clearly a sintered style and feels nice. Hope these work as good as the Brembo.View Detail
Very nice set of brake pads for the TZR50. Better feel than the stock organic pads and the price is affordable. The pads are sintered which adds some "bite" to the brake feel - you can see the metal pieces in the material in the picture.View Detail
Great little filter, I prefer the paper filter because I think they filter finer material better than the screen type. Has a 6mm ID for small capacity fuel lines. Fits nicely because it is quite small - see the picture with a spark plug for scale.View Detail
Excellent tool to remove the flywheel on a TZR50/RZ50-2 or TZM50. Worked perfectly. You need this tool to remove it successfully. This is different from normal pullers because the thread is on the outside of the flywheel (stator coil is mounted to the flywheel cover instead of under the flywheel). Easy to remove without damage.View Detail
This is nice and thick gasket paper. The colour is similar to the orange/brown in the main photo (not grey unfortunately). It's a nice and large size as well - see the review picture with spark plug for scale. Worked well on a small engine cover.View Detail
This is very high quality gasket sheet. The reason being is that it is the exact same brand as Yamaha OEM so it works perfectly. You can cut your gaskets for discontinued gaskets, just like OEM. My only complaint is that it too small! A larger sheet size would be great so we can cut a larger gasket.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송