My old 2008 FZ1 needed some care and attention and this was one part I have been meaning to swap out for a while but never got around to it. The part was easy to find from Yamaha Parts Catalogue online. Also, finding the part on webike was super easy as you just need to put the part number in and whooosh, there is it. The shipping was really fast as I purchased with a couple of other parts. Took about a week to arrive. All packed really well with bubble wrap etc. Once the part arrived, it was in tip top conditon and ready to install. Took literally minutes to put in and bolt everything back together. Thanks Webike. Great work
This is a replacement for the original o-ring for the oil pump on the 2020 MT10. Not really sure how this started leaking but the result was a lot of oil drips on the floor of my clean garage. Initially, this came in for a service and after being left over night, the oil was present and needed addressing asap. I found the culprit and then checked for the part number by using the tools Webike provide on their help pages. I also cross referenced with Yamaha schematics as if this leaks, there may be a reasonable explanation and a superseded part. Not on this occasion but the part was relatively easy to find anyway. The price was peanuts and a little better than could be sourced locally. I had a few other parts in my order and got them all shipped using EMS as they get my orders to me fast and efficiently. 5 days from being shipped for Webike warehouse and my order was at my door. The parts inside were all really well packaged and the smaller parts, like this, were kept nice and secure in a bubble wrap envelope. The o-ring is nothing to write home about but it does haver a good anmount of flex but has a rigid feel to it. Fitting was not tricky but making sure it was seated correctly was imperative. Job done, now on to the usualy service. Thanks Webike. View Detail
Fits: YAMAHA ROYAL STAR VENTURE (XVZ13TFLC) 99 Water Pump, YAMAHA ROYAL STAR VENTURE (XVZ13TFL) 99 Water Pump, YAMAHA ROYAL STAR VENTURE (XVZ1300TFR) 03 Water Pump, YAMAHA ROYAL STAR VENTURE (XVZ1300TFP) 02 Water Pump, YAMAHA ROYAL STAR VENTURE (XVZ1300TFM) 00 Water Pump
This YZFR6 has an issue with the water pump. There was a noticeable leak happening and eventually found the culprit. It was the oil seal inside that failed. I found the correct part number by checking Yamaha schematics for this model and year. Not particularly hard and I got the right one. The price Webike had this oil seal for was really great and better than my local Yamaha dealer could do. With some other parts in my order, all were shipped together using EMS. The order arrived in 5 days from shipping which is usual for EMS, they just get your order delivered. The parts were well packaged and no damage was sustained during transit. The oil seal itself was in a Yamaha packet. It is a well pressed oil seal with no visible debris or extra rubber which would cause problems where it needs to go. It is pretty rigid but had some flex to it which came in handy whilst seating it correctly. Now all done, the water pump works as it shopuld and there are now no leaks at all. The coolant is a healthy temp and all is good. Thank you Webike, very pleased with purchase.View Detail
These bolts were part of a larger order for new ancillaries for the MT07 2020. The bike had been in a small accident but had flipped a few times and damaged a lot of the bolts etc. These bolts in particular are the ones that hold on the fuel tank to the frame. So, pretty important bolts to have in perfect order. Finding the correct part numbers for these bolts was not tricky as I just use Webike help pages and the tools they provide. I then generally cross reference for my own peace of mind. The bolts were not very costly but I would prefer to pay that little bit extra for genuine Yamaha bolts when they are as important as these ones are. I did have a lot of other bolts in my order for this specific bike and having them all shipped together saved me time and money. I use EMS to ship my orders as I know they arrive in 5 days from shipping. All the bolts and other parts were very well packaged and Webike took the time to put the smaller parts inside bubble wrap too. These bolts also came inside a Yamaha packet to keep them all together. These bolts are very well machined, the threads section is crisp and easy to install. They really help my feel as though the bike is now in a safer condition than it was. Very pleased with purchase. Thank you very much Webike. Excellent work.View Detail
I have seen cases where almost everyone who rides TW 200 motorcycle is unable to remove the OIL DRAIN PLUG and removed it after some exhausting efforts, personally as well as through YouTube videos on social networks.With about 9 years of experience, I have faced many such situations. This is why I decided to buy this OIL DRAIN PLUG.I'm not the only one who rounded the yamaha factory oil drain plug that came on with TW200.OEM part number is 5HO-15351-00. Some of the members of the TW200 Fourm ,they recommended this oil drain plug (30X-15351-00) over the factory oem plug (5HO-15351-00)..This oil drai plug(30X-15351-00)perfectly fit & thread pitch look the same.I personaly think oil drain plug torque spec (43Nm or 31 ft/lbs.) way too high.If it's rounded head of the drain plug when removing the bolt .try grabbing the outer edge of the plug with some needle nose pliers Or, very carefully use a hammer and flat head screwdriver.chisel to try and tap it loose. Tap the outer edge of the plug, not the bolt head.Once you get a little groove in the plug, it should start to move, or just break. Either way, have a new plug ready. Yours needs to be replaced . What about that plug is superior to the stock tw plug? It has radial ridges around the nut. This would allow you to use a screw driver and hammer to get it off (30X-15351-00).It also creates a well that supports the socket. It helps the socket find level on its own. always use a 6 point socket ( should be a 19mm) once you want to remove the new plug..Orderd so many product from the webike store and never had a problem. great communication and smooth transaction.Thank You WEBIKE FOR THE SUPPORT. WEBIKE SHOP WAY BEYOUND 5STAR.I love shopping at webike View Detail
This part was needed as one of my customers had a small slide but the water pump housing got damaged in the process. It was not totally broken but you can never be too sure if the internals have any damage so thought best to just replace it. No point in removing the cover to inspect and then later find it is toast with no spare to put back on. It was really easy to find the part for this bike, I use Webike help page tools which provides links to manufacturers websites where you can input the bike details and shows you the schematics etc.Having got the right part, Webike actually had this in stock so of course, in my basket. The price was really good and better than I have seen locally here in the UK.I choose EMS fast service these days as this service guarantees the delivery to my door in less than a week. This was not different. 5 days and delivered. I do like how Webike take care with your orders and pack everytihg accordingly. Each part, no matter how big or how small is carefully wrapped and placed in a box and generally surrounded by extra padding to stop any damage during transit.There was a few parts in my order that did need to have some care when packing but Webike hit the ball out of the park here. All arrived with me in perfect condition and not a mark on anything.The water pump cover is really well finshed, the paint if super clean. All the bolt holes are perfectly aligned, the groove for the gasket seal is also really clean with no really sharp edges. No one wants sharp edges when you have to manouvre a delicate seal into place. These seals can easily be nipped or cut with sharp edges of the casing. I have seen this happen many times from customers who have not taken their time to fit these.The job did not take too long, the bleeding was time consuming and refilling was easy when you do it right.All in all, the result was a nicely running bike, no leaks, no damaged cover and a happy customer. Thank you WebikeView Detail
This was needed this Hayabusa GSX1300R 2004 I have of a customers. This is a magneto case cover gasket. Also I had to change the actual magneto case due to a small rock hitting it and damaging whihch looked nasty for this too so a new gasket was a good purchase. The part number was found using the methods I generally use, either the help pages that Webike supply or direct to the manufacturer websites etc. I found the price of these was really good and better than I could source locally here in the UK, just like the other gaskets. As this was part of a larger order with many other Yamaha parts, the shipping worked out to be briliiant. Everything was very well packed and arrived via EMS within a week of ordering. All the empty space was filled with air pockets and bubble wrap. Most of the parts were packed in the genuine OEM Suzuki packaging anyway. Webike even taped the outer box to ensure, nothing could fall out or escape during transit. The parts all arrived in perfect condition. The gasket was kept nice and flat and did not suffer any bends or mishapen in any way. This is an essential gasket so I had to take a little care in fitting it. Didn't take too long and everything was back together and ready for firing up. The gasket fits perfectly and along with the new magneto case, that is one more thing finished off. Very happy with the result. Thanks Webike for your hard work. It really is appreciated.View Detail
This bike had a few issues that needed sorting out. One of the main ones is the magneto cover had got a lot of sctratches on it from being in a small accident. Fiinding the right magneto case was easy by cross referencing Suzuki schematics which is available online. Might as well get a direct replacement from Webike/Suzuki instead of trying to repair this one. No bother, the casings are not that expensive but Webike did have this anyway. I had some other parts in my order and all were shipped using EMS and arrived with me in 5 days. This magneto casing was packaged in a Suzuki box and was well protected from any damage. The finish on it is really nice, a well prepared and painted in gloss black. This was the same as the original one that came on the bike so would look perfect. All the mount points were pristine and well machined. I also purchase dthe magneto gasket as there is really no point in buying the casing and not a nice new gasket to go with it. Besides, the old one was toast. SO, after bolting it all back together in under an hour, this was doen. The resuly is a gorgeous and shiny magneto casing along with new gasket. Pleased is an understatement. Thanks Webike View Detail
I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View Detail
This was a replacement for the standard exhaust bracket that came on this bike. Not that there was anytrhing specifically wrong with the stock one but it is big and a bit weird looking and the customer wanted to add some bling factor. FInding the right Yoshimura one for this model was already gotten by the customer who asked for this specific one. Not a problem, this makes my life easier not having to search for compatible ones. The price from Webike was the best I could find anywhere. With some other parts in my basket already, I had them all shipped together which saved on the shipping cost as the other parts were really small. My order arrived in 5 days from being shipped which is exceptional to say the least. The silencer bracket cme in the Yoshimura packet and had everything needed to switch the original to this. The bolts were present and well machined. The bracket itself is finished with a lovely satin black paint and feels great to touch. Fitting was surprisingly easy as it is literally a couple of bolts and that's it. The overall look of the silencer with this bracket on is superb. Very nice. View Detail
This was a replacement for a totally missing right side swingarm pivot head from the YZ125 that came in to the garage. I also had to replace the left side as that was also missing. No idea how they were lost but they were certainly not there. Finding the right covers was pretty straight forward by checking Yamaha schematics. The price was great and this made me very happy. With a few other small parts, my order was shipped with EMS and as usual, it arrived at my door in 5 days straight. Everything in the order was packaged very well and no damage during transit. The cover is a moulded one made from what looks and feels like a plastic composite. It is a very hard surface but that is a good thing. It is just a boot that goes over the pivot head and protects this from rocks and debris which swould hinder the removal onf the pivot. Fitting was just a push on cover and was very secure as I did try and prise it back off but it was well on there. Nice little job that made a good difference. Thanks Webike, nice one View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송