적합:
YAMAHA FJR1300 A Number of uses X4, YAMAHA FJR1300 AS Number of uses X4, YAMAHA FZ1 -N 2D1A Number of uses X4, YAMAHA FZ1 S Number of uses X4, YAMAHA FZ1FAZER S3C3G Number of uses X4
View more
Fits: YAMAHA FJR1300 A Number of uses X4, YAMAHA FJR1300 AS Number of uses X4, YAMAHA FZ1 -N 2D1A Number of uses X4, YAMAHA FZ1 S Number of uses X4, YAMAHA FZ1FAZER S3C3G Number of uses X4
The KITACO Full Exhaust System Gasket is simple to install since it is just a gasket. It is just smaller and softer than the OEM gasket by a bit. Hence, requiring you to make sure you've set your header pipe already to avoid dropping it. I got mine dropped within my bash plate and it is a pain to remove. Since KITACO added another piece, I wouldn't worry much about replacements anytime soon.View Detail
Fits: YAMAHA FJR1300 A Number of uses X4, YAMAHA FJR1300 AS Number of uses X4, YAMAHA FZ1 -N 2D1A Number of uses X4, YAMAHA FZ1 S Number of uses X4, YAMAHA FZ1FAZER S3C3G Number of uses X4
Fits: YAMAHA FJR1300 A Number of uses X4, YAMAHA FJR1300 AS Number of uses X4, YAMAHA FZ1 -N 2D1A Number of uses X4, YAMAHA FZ1 S Number of uses X4, YAMAHA FZ1FAZER S3C3G Number of uses X4
Fits: YAMAHA FJR1300 A Number of uses X4, YAMAHA FJR1300 AS Number of uses X4, YAMAHA FZ1 -N 2D1A Number of uses X4, YAMAHA FZ1 S Number of uses X4, YAMAHA FZ1FAZER S3C3G Number of uses X4
Quantity to replace the exhaust system on MT09:I bought 2 sets The MT09 has three cylinders, so we have one more. ,. It's a humble part, but a Gasket replacement is a must to prevent exhaust leaks It's a good place to get a good priceView Detail
Fits: YAMAHA FJR1300 A Number of uses X4, YAMAHA FJR1300 AS Number of uses X4, YAMAHA FZ1 -N 2D1A Number of uses X4, YAMAHA FZ1 S Number of uses X4, YAMAHA FZ1FAZER S3C3G Number of uses X4
The center position of the product can be set up in the small size from the OEM Product, though it is used for MT-09 It's not easy I think I would be more comfortable using an OEM Product that fits Exactly in the holeView Detail
Fits: HONDA AX-1 All models used X1, HONDA CB1000 SF (Big One) T2 All models used X4, HONDA CB1000 SF (Big One) All models used X4, HONDA CB1100 SC65 All models used X4, HONDA CB1100 EX SC65 All models used X4
About quality and texture, I can confirm that the quality is great and that the material used is a metal gasket that deforms when pressure is applied to seal between the cylinder head and the exhaust header pipe. About the feeling of use, Serves the same purpose as the Honda gasket, no noticeable difference.Seals well with no exhaust leaks present. Products to buy together, For you exhaust installation it would be ideal to add high temperature silicone to your cart to seal all the other exhaust pipe connections for a zero leak installation. Difficulty of installation, I can say the fitment of the exhaust system gasket for my installation is was very easy due to the ease of access to the exhaust stud nuts and simple nature of the task. Cost performance and comparison with other products, The pricing of the product is great. You receive a gasket to use and a spare made differently from the Honda gasket but serves the same purpose and are priced the same as the Honda gasket. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
About quality and texture: I am happy with the quality of the exhaust system gasket from Kitaco. A compressing gasket with an external diameter of 32mm and an internal diameter of 26mm.About the feeling of use: The exhaust system gasket is a firm fit and holds itself in place once positioned and has sealed the interface between the exhaust port and the exhaust pipe with zero air leaks.Products to buy together: Some replacement exhaust stud nuts would also be desirable to purchase along side exhaust system gasket as mine were cosmetically damaged from using an open end spanner due to the thickness of the exhaust pipe and not being able to use a socket.Difficulty of installation: The process to install took about 30 minutes, loosen the exhaust stud nuts so you can lower the exhaust pipe to access the exhaust port to replace the exhaust system gasket. The old exhaust system gasket was very tight and difficult to remove on this motorcycle and required the use of a small flat screwdriver to lever it up from the bottom edge and I would recommend using something softer as the screwdriver slightly maked up the exhaust port surface. Refit the exhaust stud nuts and tighten to 27N.m.Cost performance and comparison with other products: Good costing as you are getting two quality gaskets from Kitaco that are always in stock and ready to ship but the genuine Honda gasket is slightly cheaper but you have to wait a while for stock to be available.About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: Kitaco or K-Pit offer many replacement gaskets for the Monkey 125 that can be viewed in the Kitaco engine tuning and maintenance parts catalog and stock is available and ready to ship here on Webike.View Detail
Fits: HONDA CD50 79-92 CD50Z/E/F/H/N [FNo]CD50-1300001 to 1904169 [Number of use]1, HONDA CD50 93-98 CD50P/S/W [FNo]CD50-2000001 or later [Number of use]1, HONDA CD90 80- CD90A/H/N [FNo]HA03-1000003 to 1303689 [Number of use]1, HONDA CD90 93-98 CD90P/S/W [FNo]HA03-1400001 or later [Number of use]1, HONDA CRF50F 04- CRF50F4/5/6/7/8/9/A/B/C [FNo]AE03-1400001 or later [Number of use]1
Приобретал для замены глушителя на Honda Monkey. Все отлично подошло, качество превосходное, в чем я и не сомневался. Как всегда к продукции KITACO претензий нет!Purchased to replace a muffler on a Honda Monkey. Everything fit perfectly, the quality is excellent, which I had no doubt about. As always, there are no complaints about KITACO products!View Detail
Fits: KAWASAKI GPZ400S 86-88 Number of genuine links] 104, KAWASAKI GPZ400R 85-89 Number of genuine links] 102, KAWASAKI GPZ400 83- Number of genuine links] 106, KAWASAKI GPZ250R 85- Number of genuine links] 104, KAWASAKI GPX400R 87-89 Number of genuine links] 102
I have used these chains in the past and they seem to hold up fairly well ! I ride in very muddy conditions which are hard on most any chain and this one usually holds up well for a whole season of very harsh conditions !So far, I have had over 5000km, mostly dirt, and balls out at that.I have only adjust once, and that was mostly chain guide wear, not chain. Inspected the master, and the grease was perfect inside the uw-ring/bushings.The Uw rings touch the plates in two spots where an Oring only touches in one. they keep the factory grease in and the dirt out. I only oil the chain to keep it from rusting on the outside. they do not seem to kink like a lot of chains do. NEVER use a power washer in the chain area though. we clean the bike with a simple water hose, a bucket of soapy water and brushes 99% of the time.They last forever as long as you clean with the hose or after each ride and then hit with some Lube after it dries.You need this and do not know it. I researched and determined this is one of the best products for me. I am glad I purchased and would recommend for any friend, you may not be my friend but you can take the recommendation if you like.Fast shipping as always tooHave a great day.BUY THIS CHAIN !!!View Detail
Great looking handle bars they mount up easy.I used this on my monkey to stop hitting my knees into the bar ends when turning tightly while seated. Used in conjunction with the 10mm riser. The finish is cool but the throttle tube turns a little less smoothly now. Now let me just say something here. I went down pretty hard tore up the hole left side of my bike and bent them up pretty good. It was my first ride with them and I had to of hit pretty hard because I've spent the last 1 hours trying to bend them back into place and I can't even get them to budge. I've used a torch, a hammer, a 1 meter cheater bar with a vice, a sledge hammer, and I've even tried to run them over with my truck. These things won't bend back into place I definitely suggest getting them best price for the best quality. I am buying another set along with grips. I think these are my newfavorite set of bars now.If you are considering buying this product do it they are great!View Detail
Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips!I have good luck with most all webike products.I purchased 1 of these along with the associated heated lock grips for my wife's and my bikes. Installation was straight forward after watching the videos. Just had a chance to try them out over winter break with temps around 10C - 15C. They took a few minutes to warm up, but did a great job. We typically started on a setting of 2 - 3, then turned them off after our riding activity increased. Very warm, even through our winter gloves. Great purchase, happy wife!Would recommend! Fast shipping as always too.Thank you Webike.View Detail
Gotta have oil filters, right? I like to change filters often but don't want to put a bunch of money into it if I can avoid it.Great filters. I learned about these when I had an older bike and found out they supply alot of oem and aftermarket oil filters. Same quality as oem and there cheaper. Why not buy directly from the manufacturer. Never had an issue running these. The inner screen has extra large holes and the metal is folded nicely. The rubber grommets fit tight on the filter's metal end caps and they fit tight around the pressure relief insert Mt09. I give it 5 stars plusThese filters are a good value and have worked great for us.View Detail
Great replacement for many naked original equipment,excellent upgrade, aluminum tubing much thicker than stock steel, Great bars and a good price.I like the rise and the bend, standard so no need to modify my clamps or add risers. Light and strong aluminum make for a great set of bars.Best handlebar I have found.Put the black high bend on my 13 mt09.Just need to drill the hole for the throttle mount so it doesn't rotate. Easy to do, just mark and drill.Couple inches wider than stock and a little taller.Thanks for the fast shipping and careful packaging. The only downside is that the shipping costs are very high.The economic shipping is no longer available.View Detail
?
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송