30,337.54 KRW
(3,402 엔)
28,999.91 KRW
(3,252 엔)
(4% OFF)
4 (3 구매후기)
Very Good
Used for Tachometer of CB50JXUsed to divert a CB50JX Tachometer to an XLR80R.
The pitch for both the meter and bracket is 4.5 cm, which is just right, but the hold section of the CB50JX Tachometer is a half screw and the screw section and straight section have different diameters, so a little ingenuity was needed in the installation.
When we used a collar that goes through the hole in the cushion rubber, it interfered with the Straight part of the MeterHold. Therefore, we intentionally fitted the cushion without using a collar, and it fits just right.
However, the hold section of the Meter in Mukawa is horizontal, whereas the CB50JX is vertical, so the Meter is rotated 45 degrees when fixed to the handlebar.
The product itself is of good quality, even the Hexagonal Wrench is included.
Reviews For SP TAKEGAWA 핸들 클램프 미터 브래킷 From Other Webike User
Average
Handle Clamp Meter StayAbout quality and texture The quality was good, and there was no problem installing itAbout the feeling of use There was a limit to installing it in the direction I wanted on my handlebarProducts to buy together The 05-05-0035 dn meter I have is 42mm, so I couldn't use itDifficulty of installation 45mm tachometer requiredCost performance and comparison with other products It's good to install it on the handlebar and set it up in various waysAbout shipping and packaging It took a week and the packaging is greatAny concerns, cautions, or advice when purchasing I thought it was made against dn meters because it was a Takegawa product, but I don't think so So you have to use the clamp that's included in the tachometa, but if you use it, you have to level it Then there are only a few places to installView Detail
Very Good
well-madeI bought it to relocate the meter. The meter is also in Mukawa, so I just popped it in.View Detail
Most Viewed Reviews Of SP TAKEGAWA Meter Bracket
Very Good
SP TAKEGAWA Bracket For Compact LCD MeterAbout quality and texture It was smaller than I thought, but it's okayAbout the feeling of use The angle didn't come out to install it where I thought it would be Products to buy together SP TAKEGAWA Compact LED Thermometer With Stick Temperature Sensor Product # 05-07-0004Difficulty of installation easyCost performance and comparison with other products We need to find products that are similar in price to other companies and fit our bikeAbout shipping and packaging It took a week and the packaging is greatAny concerns, cautions, or advice when purchasing The composition contains a VELCRO with a bracket and double-sided tape, which allows it to be attached to the temperature gauge or bolt gauge, but as mentioned above, it was a little disappointing because it was smaller than I thought and had limitations in installationView Detail
Excellent
Great for Mounting my Universal Temperature Gauge on the GromAbout quality and texture: I am happy with the quality of meter bracket from SP Takegawa. A stainless steel bracket that is nicely shaped, has a M10 sized mounting point and cutout to pass the guage wiring through.About the feeling of use: With the bracket attached to the left mirror mount my temperature guage is now positioned in a much better location and the bracket is free from vibration while operating the motorcycle.Products to buy together: Some form of guage would also be desirable to purchase along side the meter bracket to make it of any use. SP Takegawa and Koso have a great selection of guages to choose from.Difficulty of installation: The process to install takes about 5 minutes, removal of the left mirror post was requires to then position the bracket between the mirror post and the mirror mount. I have left the bracket flat for now but could be bent up some if needed for a better viewing angle. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a quality stainless steel bracket with a nice design as compared to cheaper options from MiniMoto and Posh that are made from aluminium.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: If this bracket design does not suit your needs then there are many more to choose from right here on Webike in the meter bracket category.View Detail
Average
Handle Clamp Meter StayAbout quality and texture The quality was good, and there was no problem installing itAbout the feeling of use There was a limit to installing it in the direction I wanted on my handlebarProducts to buy together The 05-05-0035 dn meter I have is 42mm, so I couldn't use itDifficulty of installation 45mm tachometer requiredCost performance and comparison with other products It's good to install it on the handlebar and set it up in various waysAbout shipping and packaging It took a week and the packaging is greatAny concerns, cautions, or advice when purchasing I thought it was made against dn meters because it was a Takegawa product, but I don't think so So you have to use the clamp that's included in the tachometa, but if you use it, you have to level it Then there are only a few places to installView Detail
Very Good
well-madeI bought it to relocate the meter. The meter is also in Mukawa, so I just popped it in.View Detail
Very Good
For AF meter installationI purchased this for AF meter installation on Mirror Screw, and it is convenient because the angle can be adjusted at the bracket. I wish the bracket part was a little longer because of the design of the Mirror I have attached to it.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송