12,361.03 KRW
(1,388 엔)
11,203.3 KRW
(1,258 엔)
(9% OFF)
5 (3 구매후기)
Excellent
Replaced as it got old.It's not impossible, but the shade is Accent and it's a nice touch.
Reviews For KIJIMA 브리더 호스 필터 From Other Webike User
Excellent
As expectedIn order to escape Blowby gas I installed Hose backwards, but I do not want it when I join Gas with Gas so I bought KIJIMAKIJIMA Breather hose filter this time on Design and Cost side with Compact.
Once installed, I am satisfied with the fact that the design is good and the product is also good with Compact.View Detail
Most Viewed Reviews Of KIJIMA Breather Filter
Very Good
GoodItem received look good, look different from photo in Webike. Going use as breather for my bike. Have not try but it will do the job as decent air filter. View Detail
Poor
It is easy to disconnect the Rubber hose part from the Body.Since it is undesirable to release Blowby gas directly to Large air, this Filter is attached to the end of Breather Hose 650mm 6mm Diameter.
There is a groove at the joint of the rubber hose, and the plating part of the cleaner body fits into the groove, but the body comes off from the joint when running, probably because the groove is shallow.
The Filter was seated inside the Seat Cowl, but it does not appear to be tightly pressed in, so I assume that it was dislodged by vibration.
I wanted the Filter to Catch the discharged Oil, but the Oil was running through the Rear Fender and Sauce to the Swing Arm from where it came off, so I would like to improve the problem.
I keep regretting that I should have used something like K&N's with an integrated Hose mounting, even if it was a little more expensive.View Detail
Excellent
Introduce Fresh air in Crankcase.I am self-satisfied, but in the true sense of the word (for a four-wheeled vehicle), the idea is to introduce fresh air into the crankcase and return it to the carburetor joint, so I do not install an oil catch tank, but install a hose from the engine side into the air cleaner box. Therefore, without installing the oil catch tank, I installed the hose from the engine side to the air cleaner box in order to introduce fresh air into the Crankcase (Engine oil injection hole).
It is rumored that YAMAHA FZr Series has high pressure inside the crankcase, so I install it for the purpose of inhaling Fresh air, but I also expect the effect of exhaling it.
* The video is a celebration of the completion of the FZr1000 3GM 2020 Spec.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송