Until now, I've been using the OPMID product, which is almost a "standard" in the GROM world It was functional enough, but I couldn't stand the poor visibility during the day and decided to replace it Installed using OPMID's interrupts in the sensor section, just replace the body It took me some time to realize that it does not work unless I connect both the Red and Black wires of the power supply If it's only a temperature and voltage display, it's always on (Red line) was probably unnecessary, and the instruction manual also stated that the Red line was not necessary to use the clock function I thought it was broken
(If you don't use a clock, connect the Red line to the same line as the Black line (Large temperature is stored in Meter, so there is no problem.)
But I'm glad to see that the display was so Paris-ish (*∇*) Then there's the durability
I installed it in SUPER CUBJA10 while looking at the Instruction Manual Wiring was done I almost made a mistake because the power supply is always Red, the ON position is Black and Earth is Green I didn't understand the oil temperature sensorWiring, but the same color was displayed safely Coupler might have been easier I just installed it, but I think it is good because it can display oil temperature, voltage and clock 。View Detail
I installed it in SUPER CUBJA10 while looking at the Instruction Manual Wiring was done I almost made a mistake because the power supply is always Red, the ON position is Black and Earth is Green I didn't understand the oil temperature sensorWiring, but the same color was displayed safely Coupler might have been easier I just installed it, but I think it is good because it can display oil temperature, voltage and clock 。View Detail
【What made you decide the purchase?】 "DAYTONA AquaProver HG Temp meter" Because there were various Trouble at Purchase this. * About Trouble "AquaPRO over server" Described in Implex. 【How was it actually used?】 Actual use is not yet, but with the back light + key off you can also display the clock Usability is likely to be good. 【Was it difficult to install? (Hard parts case)】 As for the mounting method, if it is a person who always knows the power supply, ACC, GND There is no problem to watch, back light display. However, in order to display Thermometer it seems quite difficult outside the applicable model. 【Please tell me the point of installation and hang (in the case of Hard parts)】 However, for Thermometer it is not due to the interrupt premise from OEMECU, Temperature Sensor is not included. We tried to divert that Thermometer for exchange from AquaProver as mentioned above, ? Connector's TAB, receptacle does not fit as it is (For Connector Included Parts : Can be combined by processing) ? Wiring is Quantity : Because it is 2pc to each other, + / - I tried a combination, but the voltage / Current amount / PRO Kotor's Whether one is different, six types of Pre-set P-1 to P-6 (Honda / Yamaha / KYMCO) setting Match without switching. Light motorcycle production in developing countries is Target? * This neighborhood is self-responsibility, so if it goes well ... If you try to actually display Voltage / Current amount / It seems necessary to investigate PRO Kotor, so the difficulty level will be quite high. Beforehand "AquaPRO over server" Since the maximum oil temperature can be recognized, there is no need for present situation. Condition occurs. If we accurately display the temperature, it seems that a considerable investigation will be necessary. Also, the color of Wiring is different from my sense. Red : Always power → OK Black : ACC → Black at GND? Green : GND → In normal Black? And Personally Wondering Wiring There is a sense of color. However, regardless of Wiring color, for expansion, each with Bullet Terminal It is highly appreciated that Wiring for branching is prepared. * But it also does not match the color scheme with Endurance made Grip heater of simultaneous purchase. Griche also Red : ACC → There is no particular preference for color, but I want you to combine with the branching Wiring color of Meter Black : GND → OK So, it is confused when using the extended Bullet Terminal below. 【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ] None [Is there anything I was disappointed about?] Temperature Sensor input is only for Pre-set ECU. 【Hope for Manufacturer - Please let me know if you have any improvement points] - I want you to be able to select clock display 24 hour display as well. - Temperature Sensor input not only for ECU of fixed model, Please also correspond to input from UniversalTemperature sensor. - At the very least I want you to unify Wiring colors with in-house products. 【Have you compared items?】 DAYTONA AquaPRO - HG Temp meter [Others] Because I can fix voltage display by Endurance made Grip heater, Clock display only (There is no clock in Meter of Motorcycle) However, As we can also check the maximum oil temperature in Circuit, Although Thermometer is not necessarily required, Sensor If you can use Thermometer even if sold separately, it will be highly appreciated.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송