I was dissatisfied with the Grip when I used to put the R&G Pad on it, so I bought it It's a significant improvement A slight complaint is that there is a rubber to the part that does not hit the thighs, so it is one more small part I think it's easier to paste Also, Rubber's Cut is a mess
I've seen this product a lot, so I was curious to see how effective it was.
I hadn't been able to get my hands on it because I thought it was too expensive, but I took the plunge and decided to buy it and it was the right decision.
Knee grip requires very little effort, so touring fatigue is significantly reduced. It prevents the seating position from shifting forward. Stable when Hanging on and it is also very good in terms of Riding Position.
ThornThorn is pretty intense, so it might hurt a little if you wear thin Pants. (Denim would be Large sturdy) Also, I'm a little worried about the Pants side if you wear leather pants.
It's not the easiest category to apply. The adhesive strength of the bonding surface is considerable, so if you do not position it properly, you will be in tears. Also, because of the mucus, it is difficult to apply while removing the air, so I recommend applying Black unless you have a lot of hail. ([Color] If you use Clear, you can see the air bite and the place where it was reapplied)
If you think of it as just a Rubber Seat, you can't deny that the price is rather high, but since it's not cut and molded, it's probably not a bad price for a motorcycle product that can't be produced in quantity. Also, if you think about the effect of the installation, there is a benefit that can pay for this price, so I don't think you will regret buying it.View Detail
I installed it in the Busa of the 2009 CanadaMODEL which I acquired from my brother. The inner knee part of the racing suit is shaved off. The non-slip sheet fabric was better for holding me in place than this one. However, it looks cool, so it's good!View Detail
I thought that I do not have to slip when riding with jeans and I bought it. Although it looks awful, I expect it for performance. Since TankCarbon was installed, I installed it with some processing. Because my friend helped me, I was able to install it unexpectedly easily. But I think Hair Dryer is an essential item.View Detail
【What made you decide the purchase?】 Since it will be diverted, this was only by comparison of Tank size 【How was it actually used?】 Since I am using it on another vehicle, the feeling of Grip is the best 【Was it difficult to install? (Hard parts case)】 Although it is Clear, you can stick it cleanly if you put it neatly 【Please tell me the point of installation and hang (in the case of Hard parts)】 Position firmly and blow water with firm misting and paste from the projected part, Air will not enter 【Have you compared items?】 For GSX 1300 R, only this is hit, ZZr 1100 or Lineup does not have it, shape it select this [Others] When warming too much at the time of pasting it will stretch so it feels like warming with Hair dryer is just fine Although it can not be said that wear and tear of Pants is not said, Riding becomes considerably easy and we can afford. Although it is not a cheap one, I thought it was appropriate to consider fatigue.View Detail
When used in conjunction with Carbon Tank Protector, Pad interferes, so I cut out like a photo. Because it holds firmly at Breaking, thigh does not slip a lot. It might be difficult to get on without using thick G pan (Lol)
After all Clear is hard to paste or air bubbles are conspicuous. We recommend dare to dark blue car. It might be hard to stand out because it is White.View Detail
I bought this product from WeBike several years ago and installed it on my bike. Todate, it's still on and is very useful in providing some grip and prevent scratches on my tank. I will surely use this product again and buy it from WeBike.View Detail
본인은 zx14r 차량을 타고있는데 제품이 너무 좋아요. 확실히 위바는 좋은제품을 취급하십니다. 빠른배송과 친절한 상담 정말 감사합니다. 항상 구매하지만 구매할때마다 행복합니다. 또다른 여러가지가 있으니 항상 써핑중입니다.----------------------------------------------------------I'm riding a ZX14R car and the product is so good. Certainly Wiba handles good products. Thank you very much for your fast delivery and friendly consultation. I always buy it, but I am happy every time I buy it. There are many other things, so I'm always writing.Powered by Google TranslatorView Detail
這個油缸止滑貼真正好用,因之前都是用webike公司另一碳織款式的油缸貼,但是沒有止滑功能,但外觀美麗,當在攻灣時險些跌出車外那危險時,決定更換STOMPGRIP的產品,暫時測試後發現其止滑功效非常出色,所以更换了油缸蓋冚都要再購多一套以備用,多謝webike 的購買流程非常簡便快速,會再來購物。This oil cylinder anti-slip sticker is really easy to use, because I used another carbon-woven cylinder sticker from webike company before, but it has no anti-slip function, but it looks beautiful. When it was in danger of falling out of the car when attacking the bay, I decided to replace it. STOMPGRIP's product, after a temporary test, found that its anti-slip effect is very good, so if you replace the cylinder head, you have to buy another set for backup. Thank you webike for the very simple and fast purchase process, and will buy again.View Detail
This STOMPGRIP center tank piece is the only missing item for my Suzuki SV650 tank protection. I have used STOMPGRIPS side tank which I bought from a different shop. WEBIKE offers the center tank piece in transparent model which fits the current set up. STOMPGRIPS not only offer paint protection but also provides the rider the ability to grip the tank with the legs for better handling and confidence.View Detail
Shipping was fast, item received within 2 weeks of ordering. Fits perfectly on the 2009 model Suzuki GSX-R600. Application was easy, got it done within 10 minutes.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송