DAYTONA's vehicle type Exclusive Bracket has Z 900 RS, I bought it immediately. There is nothing difficult if you follow the instructions as described, "Instruction Manual" It may be a special item including also. To prevent unnecessary scratches and breakage, open the light case and remove the Screws until you can move the Lens unit. It is unfortunate that there is no anti-rotation mechanism, that you hit Meter case Sponge is pretty.
I fixed in honda hornet 250.once fixed to headlight mount the palstic visor will too closer to headlight ring.but I'm satisfied about product.Made with good thick iron plate.once tied bolt, it will solidly will hold to mount.View Detail
배송 해외배송 아닌것처럼 국내배송 +1 정도 생각하시면 됩니다.포장도 꼼꼼하여 맘에 듭니다.설명서 없이 설치도 간단하며 튼튼한 질감에 만족도가 더 높습니다. 기존에 있던 바이저는 장착도 복잡하고 딱 맞게 고정이 안돼어 볼트를 조여도 자꾸 흘러 내렸는데 이건 딱 맞고 아주 좋습니다.You can think of domestic shipping as +1.The packaging is also meticulous.Installation is straightforward, without documentation, and more satisfied with the sturdy texture.The existing visor was complicated to install and could not be fixed properly.This is just right and very good.translated by google translateView Detail
Монтажная штанга для крепления навигатора или часов, к крепежу стекла Daytona.теперь надо покупать стекло или крепёж к нему.))Mounting bar for attaching the navigator or watch to Daytona glass fasteners.Now you need to buy glass or fasteners to it.))translated by Google TranslatorView Detail
Was the installation difficult? It is easy. Beginners are also Large sturdy.
How was your experience with it? The Screen position can be changed to three different positions, so you can change it depending on your mood or the weather. Setting the Screen to the highest position will reduce running wind in your face. Setting the Screen in the middle will help a bit to reduce driving winds while preserving the OEM feel. Bar Holder is also useful. it helps to mount Camera and Smartphone.View Detail
This is a Bracket for DAYTONA's Blast BaStar, but I also used it to fix my own Screen.
It is a type that is fixed through the bolt of the round-eye light, so it can be used quite universally.
In fact, I used one for CB400SF on my VT250 SPADA. However, when using Blast Barrier for Screen, the light diameter must be the same due to the fixed hole pitch. (Normal light diameter:CB400:180mm, VT250 SPADA:160mm)
It's a solid bracket, but because it's a steel plate, you can easily adjust the angle and re-bend it if you apply enough force. It has a protrusion to stop it from spinning, and there are many details to consider, so you will be more satisfied with the finished product if you buy it than if you make it yourself.
For those who use DAYTONA's Screen, Quantity:I would buy it at Set, but I would also recommend it to homebrewers.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송