Purchase this product as Hook hanging Net on XDiavel with poor loading capacity. I was satisfied with the result but I could not install it as I did with the Instruction Manual.
I tried using it ? Between Cowl and Seat "ear" Although it comes out, there is no worry of hurting Cowl with Hook. ? Because it is made of Nylon belt, even if you sit on the Passenger seat it will not get in the way. ? Since I licked the Bolt of the installation place originally, the installation position was biased towards the front, but by covering Backrest with Net and pulling Hook it was no problem even if it was in front side.
Installation Washer interfering with Passenger seat must be removed or RiderSeat could not lock. If this point can be tolerated "Yes" I think.
I bought DUCATI PANIGALE V2, and when I was considering to buy Krieger SeatBack, I found the kit for V4, and when I checked, I bought it because the structure of Rear part seems to be similar. It is not so difficult to install because you only need to remove the Rear Fender with a hexagon, but it took me about 30 minutes because the belt overlap part overlaps the narrow part of the Fender halfway. If you get used to it, I think it takes about 10 minutes. It's very easy to use, but if you leave it on, the strap is not hidden under the seat, so if you care about the style of Panigale? I think so. I leave it on because I don't feel like I'm large.View Detail
2020 I installed it on my YZF-R6. It is very simple to install by opening the Rear Sets, removing the Bolt seen in the four corners and installing it again. This makes Krieger's Bag installation very SMART.
Some people may be able to make their own, so you'll have to think a little bit about the costumes.
I was able to do it without problems for installation. No problem with texture.
Seat bag US-10https : / / www. webike. net / sd / 20013033 / I went to a day trip to Mount with. It is nice to have it installed, but we will gap to the driver side in about 30 minutes. Gap about 10 cm from the initial position. I hit the driver's buttocks so I am very anxious. It is not until it falls...
The reason is that the mounting pitch is shorter than the Pitch of Bag and the Motorcycle side is short. I think that this installation method will not be established in Panigale. I regret that I like the texture of Bag, but I replaced it with another Bag.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송