106,867.68 KRW
(12,000 엔)
86,954.67 KRW
(9,764 엔)
(19% OFF)
4 (4 구매후기)
Average
Bad visibilityI wanted GEARShift indicator function of Tachometer function I bought this but it is bad visibility
Since it is not said that the other imprints have poor visibility, it is a problem only of their own individuals
It is hard to understand in the photograph but the character is thin.
All of the vehicle speed Pulse, the Neutral signal and the Pulse of the engine speed were interrupted from the Handlebar Switch and Meter's Wiring.
Parts related to installation are all attached and instruction manual is easy to understand but Wiring diagram or Tester is required
If it is a famous car model it will come out if you googled
One place Bullet terminal The attachment of the terminal went badly but there were no other problems.
If you turn Rear tire to make the Position of GEAR memorize in Nano 2 Gear Position Indicator, it will be difficult if the speedometer does not work. In this case real run or Bench required
Harnessetc. Length was longer, I did not want to turn off the Wiring on the Nano 2 Gear Position Indicator side and struggled to walk around (WR250R)
Is it no problem if it is a car model of NAKED or Full cowl?
Reviews For DAYTONA Nano2 기어 위치 표시기 From Other Webike User
Very Good
外觀好看In terms of appearance, I personally think it is very satisfying, and the size is moderate. Finally, I hope it can be easily installed on my beloved motorcycle.View Detail
Excellent
I'm satisfiedAt the beginning I felt BodySize was a little Large, but when I got used I felt no sense of incongruity.
Although the display is not a self light type but a back light expression, it is not too bright even at night and does not feel a problem with visibility.
Since the installation vehicle uses the Electric speedometer conversion adapter, initial setting can not be done according to the instruction manual, but thinking that setting by self-propelled is dangerous, a circuit that generates IgnitionPulse and Speed ??meterPulse corresponding to each GEAR I made and initialized on the desk and installed.
The operation after installation displayed each GEAR without any problem.
In order to see that reconfiguration is necessary when changing Sprocket, I tried changing Rear Sprocket by two or so to be small, but the display shows accurate display without problems and the allowable range is quite satisfactory.
Speaking of complaints, as soon as you turn off Clutch, the display will be "-", but if you keep the previous GEAR display and enter Neutral "N" will be displayed Spec. But I think that it was good.
However, I am satisfied as a whole.
View Detail
Excellent
My vision disappeared.It's gone 7th speed of vision. It is a larger display than Protec. If you want casually attach Protec, if it is easy to see Large DAYTONA.View Detail
Most Viewed Reviews Of DAYTONA Indicators
Very Good
外觀好看In terms of appearance, I personally think it is very satisfying, and the size is moderate. Finally, I hope it can be easily installed on my beloved motorcycle.View Detail
Very Good
It's a larger than I thought it would beI installed it on my Yamaha WR250R.
Because the meter was rotated vertically and broke, I replaced it with an external one and added this one because there was no indicator.
Please prepare the Service Manual as wiring is required.
The field of view is good because of the amount of light.View Detail
Excellent
It's neither good nor badIndicator stay was the only one I could find that was made by DAYTONA, so I bought this one
Visibility, I think, is adequate
More expensive than KIJIMA productsView Detail
Very Good
Be careful when installing it on a non-appropriate vehicle!I bought it because I fell in love with the shape
Remove the OEMMeter assembly from the VTR250Fi and remove the 6V MONKEY/ Connected directly from GORILLA Main Harness, the warning light, neutral light and I was thinking of using it for Blinker lights, etc
I planted a Bullet Type Terminal with a schematic and a neck and neck, but it was brilliant Jade shattering
It appears that the Lamp is controlled via the base of the assembly, so it is directly Even if it is connected to Indicator Lamp, it doesn't say "Unn" or "No"
(For some reason only Hi-Lo came on...)
I ended up removing it
View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송