I did not like the shape of Air Cleaner Box of OEM by all means and wanted to increase intake efficiency and tried purchasing.
Although quality was not a problem, at the time of installation, the Screw hole on the Benchuri side, which should be fastened by the M6's Long bolt 3 pieces with Air Filter Body and Bracket, became Screw hole of M5 and cut with M6 Tap It turned out to be fixed. (-_-;)
As expected, United States Brand! There is Ha Gap and making is About.
The feeling that I ran after installation is a combination with the same Brand 's Vance Slip - on Silencer which is too good to miss so Response is nice, but there is no sense of Torque and the rotation does not come with it. Well this is probably going to be resolved if you adjust the fire control with FI Controller. Although it is an intake sound, opening Shuttle with ShoeShoe at Idling will make it sound like a smoke.
Image is only Air cleaner Body sold separately Cover is not in the state so it looks awkward.
In addition, InchScrew is the total quantity for mounting only Body Quantity : Because there is 2pc 1 / 4 Inch size Hexagonal Wrench or Socket is required. The attached Blind screw for Cover installation Screw hole is also InchScrew so if you do not install Cover 5 / 16 is also necessary.
I was sorry that I had to shuffle the M6 ??Tap, so I will keep it two in this time.View Detail
The most worriing thing about the installation was to say that there is no problem with the Injection controller of the OEM after installation, but that point has no problem at all.
Although it is an installation, it is very easy if it is normal, and all the work will be over in 30 minutes. However, in the case of me, the position of the Bolt hole on the car body side was misaligned, or the three long Bolt holes somewhat narrowed at the entrance and Bolt did not enter, so Drill joined the work of saying that the entrance to the hole was tightened Large 1. It took about 5 hours..
Impressions after installation are as follows: First, the intake sound becomes Large, and the sound like shashasha is heard normally, and when you leave Throttle while driving, it becomes a Large sound even more. Exhaust sound (Made by Pranas) It is a feeling that the sound of the original dodododo turned into a sound like a little dose effect. (It is a good sound)
Also, I felt the response to Throttle improved and I felt the acceleration feeling increased (Maybe this only makes me feel)
Since it is made in USA, it may be necessary to process a little because there is hit Gap, but I think that it is well worth looking at Refreshing the appearance and Parenthesis well. It's also attractive to be cheaper than other Manufacturer.
Durability etc. I do not know because it is the future.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송