4,915.91 KRW
(552 엔)
4 (13 구매후기)
Very Good
If LED Blinker Large durable.I tested with 12v21wOEMValve before changing the LED Blinker of my friend GSR 750. Quantity : Pair (for Left and Right) Blinker is OK, but when of Hazard, did not react at all. When I replaced it with another IC Blinker Relay that I had on hand, since it was OK with Hazard, it was not a Wiring mistake, so I changed the Font Blinker to LED first. Then Hazard was ok too. A total of 80W or more is not flashing, seems to be a non-lighting.
Reviews For MADMAX LED 용 윙커 계전기 12V 2 핀 From Other Webike User
Excellent
Blinker is now blinking!The OEM Blinker was used and expensive, so I went with the SR400 Blinker, which has a similar shape.
When the voltage dropped, the Blinker stopped blinking.
I just had it looked at by a motorcycle shop. The winker relay seemed to be wrong as it was. If you don't know any better, just get one of those ICRelay ones." So I decided to go with this inexpensive, 2-pin product.
After replacing it with this product, it started flashing without any problem even without the Engine running (even with low voltage).
When I installed it. The direction of the pin was different from that of the original Relay, which made me nervous.
I was able to attach it without any problem with the original wiring length. (Is the wiring a bit of a burden?).
The side cover also came on without any problem.
The blinker doesn't blink when the voltage is low... Refreshing!
I heard it's not water resistant, but I'll think about it then.View Detail
Very Good
It's working.When I changed the Blinker to LED, I replaced the Blinker relay with a posh one. The other day, the Blinker suddenly stopped working, and when I checked, the Fuse was blown, and because it became the situation that Blinker does not blink though it turns on even after the Fuse is replaced, I installed the OEM Relay which I left without throwing away even after the replacement, and when I tested it, in the state of High flasher Then, I installed the OEM Relay which I did not throw away and tested it. I decided to order this Relay as soon as possible.
Initially, I was going to order the same posh one that I have been using, but since it is troublesome to replace it when it is broken by using a cheap one, the posh one that I used seemed to be reliable even if it was a little expensive and lasted only about 3 years. Because it is an old vehicle, and it is not possible to say that something broke the blinker relay by the cause, and the same symptom might come out again, this time, I changed the policy and decided to buy a cheap one.
When I picked up the product that arrived, it was a little larger and a little lighter than the one of posh. Immediately, I made a wiring using 3-pole Coupler and Plain Type Terminal which had become stock, and when I installed it, it operated as if nothing had happened. The flashing seems to be a little slow, but I think it is within the acceptable range.
I don't know how durable it is since I just put it on, but I hope I can use it for a long time without any problems. For the time being, I changed the installation position of the blinker relay to the position where it can be replaced without removing the tail cowl because I made the wiring longer, and for the time being, I will keep a spare blinker relay and Fuse on board for when it breaks.View Detail
Average
Not very responsive.Since it was able to use it without a problem with GROM, I used it for VTR250F.
I did
I changed the Relay first to make the Blinker LED.
In the case of VTR250F, first of all, Connector is necessary, and it is a very narrow place.
Because of the Relay, the workability is very bad and the hurdle is high.
There may be individual differences, but the response is slower and
It was useless.
No effect on VTR250F.
However, I was able to use it without a problem in GROM, so it is also compatible.
There may be.View Detail
Excellent
At this price!I crashed with Circuit and damaged Blinker but OEM Parts Number was high so I bought LED Tape at a certain tool shop and used Blinker with Aluminum plate at home and DYI with Blinker embedded with LED, using Blinker. It can be used without problems and is satisfied with low price
View Detail
Excellent
Is goodI replaced it because the relay of SDR has broken down. I like it, so Blinker does not blink when stopping TZr (1KT) I exchanged the Relay's here as well. Relay of old vehicles is often deteriorated, and it is recommended because it leads to power saving by replacing it with IC type Relay. There seems to be no waterproof sexuality, but there is no particular problem as Relay's place of installation is under Tank, because it does not ride on rainy days.View Detail
Most Viewed Reviews Of MADMAX Turn Signal Relay
Excellent
Blinker is now blinking!The OEM Blinker was used and expensive, so I went with the SR400 Blinker, which has a similar shape.
When the voltage dropped, the Blinker stopped blinking.
I just had it looked at by a motorcycle shop. The winker relay seemed to be wrong as it was. If you don't know any better, just get one of those ICRelay ones." So I decided to go with this inexpensive, 2-pin product.
After replacing it with this product, it started flashing without any problem even without the Engine running (even with low voltage).
When I installed it. The direction of the pin was different from that of the original Relay, which made me nervous.
I was able to attach it without any problem with the original wiring length. (Is the wiring a bit of a burden?).
The side cover also came on without any problem.
The blinker doesn't blink when the voltage is low... Refreshing!
I heard it's not water resistant, but I'll think about it then.View Detail
Very Good
It's working.When I changed the Blinker to LED, I replaced the Blinker relay with a posh one. The other day, the Blinker suddenly stopped working, and when I checked, the Fuse was blown, and because it became the situation that Blinker does not blink though it turns on even after the Fuse is replaced, I installed the OEM Relay which I left without throwing away even after the replacement, and when I tested it, in the state of High flasher Then, I installed the OEM Relay which I did not throw away and tested it. I decided to order this Relay as soon as possible.
Initially, I was going to order the same posh one that I have been using, but since it is troublesome to replace it when it is broken by using a cheap one, the posh one that I used seemed to be reliable even if it was a little expensive and lasted only about 3 years. Because it is an old vehicle, and it is not possible to say that something broke the blinker relay by the cause, and the same symptom might come out again, this time, I changed the policy and decided to buy a cheap one.
When I picked up the product that arrived, it was a little larger and a little lighter than the one of posh. Immediately, I made a wiring using 3-pole Coupler and Plain Type Terminal which had become stock, and when I installed it, it operated as if nothing had happened. The flashing seems to be a little slow, but I think it is within the acceptable range.
I don't know how durable it is since I just put it on, but I hope I can use it for a long time without any problems. For the time being, I changed the installation position of the blinker relay to the position where it can be replaced without removing the tail cowl because I made the wiring longer, and for the time being, I will keep a spare blinker relay and Fuse on board for when it breaks.View Detail
Average
Not very responsive.Since it was able to use it without a problem with GROM, I used it for VTR250F.
I did
I changed the Relay first to make the Blinker LED.
In the case of VTR250F, first of all, Connector is necessary, and it is a very narrow place.
Because of the Relay, the workability is very bad and the hurdle is high.
There may be individual differences, but the response is slower and
It was useless.
No effect on VTR250F.
However, I was able to use it without a problem in GROM, so it is also compatible.
There may be.View Detail
Average
Some vehicles require wiring. In six months..It was attached to the ELIMINATOR 250V, but it needs to be modified depending on the wiring of the car body This body has a single Blinker MonitorLamp, so if you install it as it is, you'll be able to get a Did I leave the lights on? Do both blinkers light up at the same time? Since Emon's rectification Diode in Quantity:Pair (for Left and Right) I crafted a one-way current flow to each wiring I realized this after I connected it, so I rushed to the nearest Color:I bought it from YellowHat and put it on, but the morning before last, even though she was fine until then Relay itself has passed away It was six months old It may have been caused by a flowing blinker and a Diode with more capacity than I needed, so I'll give Relay itself a rating of 3.0View Detail
Excellent
At this price!I crashed with Circuit and damaged Blinker but OEM Parts Number was high so I bought LED Tape at a certain tool shop and used Blinker with Aluminum plate at home and DYI with Blinker embedded with LED, using Blinker. It can be used without problems and is satisfied with low price
View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송