41,707.43~ KRW
(4,677 엔)
4 (47 구매후기)
Very Good
For vibration preventionVTR 250 bought in second hand (Handlebar is Aluminum Other Company Product) I purchased it before delivering it by measures against vibration of.
VTR 250 had less vibration in his hands, so I wonder if it was meaningless.
Iron Pipe handle would be fine, but Aluminum Pipe did not keep the hole diameter 14 mm all the way, so Weight diameter is machined thinly with a lathe and installed. Still the Rubber diameter was Limit.
A person of Aluminum Pipe needs to check the state of inner diameter and purchase.
Though it is a thing, unlike other companies, it has a structure to insert the Grip end part into Pipe, so it will be safer because it will not move on falling.
Although it is riding KATANA, it will kill the vibration considerably, so if you are troubled, try it
(KATANA further changes the Grip end to heavy)
Reviews For EFFEX 핸들바 웨이트 From Other Webike User
Excellent
Reduced handlebar vibrations! very happy with this purchase. previously i had a difficult time buying handlebar ends because they were mostly cosmetic, hardly any weight on them at all. (you need weight in order to cancel out vibrations.) and because most of this product is INSIDE the handlebar, is does not protrude too much out of the handlebar. (this is a minor cause for concern because if the motorcycle falls, the handlebar end will not have much protection. but the benefits of the vibration dampening outweight this.)View Detail
Excellent
This is an inexpensive product that is easy to install, but we clearly experienced the benefits.[How is it used?
Suppression of vibration transmitted to the Handlebar
Was the one you received as per Image?
Yes
Was the installation difficult?
No, sir. It generally took about 5 minutes.
How was your experience with it?
Unpleasant vibrations transmitted to the Handlebar were reduced, and hand numbness and fatigue were reduced to a large extent.
[Included Parts:were they on?
The hexagonal wrench used for installation was also included, which was convenient as there were no other tools to prepare.
[Was there anything that disappointed you?
No, there is not
Other items that would be helpful
I think that anyone can install it easily without instruction manual.
It will be installed inside the Handlebar, so there is no picture of it.View Detail
Excellent
Very satisfied to resolve to minor vibrationGSX-R750 (2013) Implemented simultaneously with the replacement of Aluminum Handlebar outside the company.
Originally not very bad for Motorcycle, micro vibration occurred, and in combination with earthquake resistant Grip purchased for the purpose of resolving micro vibration.
OEMHandlebar and medium size (155 mm can not be secured) Although it was impossible to mount it because it was insufficient, we could install it because the outside handlebar can secure 155 mm this time.
Weighs more than OEM's Handlebar Weight (Stainless Steel) I think that it is possible to suppress the generation of microvibration. I think that combination with earthquake-resistant Grip is also effective, but it is a very satisfying result if it can be solved at this price.
Since wearing is also very easy, we recommend that people who are worried should do it.
View Detail
Very Good
Vibration reduced.I bought it with Handlebar and Set.
It seems that the Large component vibration has been alleviated
When it rotates at high speed, Large vibrates.
I will be saved when it is a little cheaperView Detail
Average
I attached it to SR 400.For SR 400, Throttle cone is Non-Penetrating, so corning processing is necessary for installation.
SR400 OEMHandlebar was fitted for 18-19 mm ID.
Installed at the time of shipment Although Screw was tightened and could not be inserted, I was puzzled, but loosening Screw could insert without problems. The installation was very easy.
The effect after wearing was suppressed in the middle and high speed range vibration, and it was clearly effective enough to be confused as long as it did not get used to it.
Relatively or Idling vibration was felt rather amplified. So I think that it is a product that requires attention for those who want to suppress vibration during idling in a single cylinder.
On the contrary, I think that there is enough effect to suppress fine vibrations in the high revolution range, so I think that it can be recommended for people with such purpose.View Detail
Most Viewed Reviews Of EFFEX Bar Ends
Excellent
Reduced handlebar vibrations! very happy with this purchase. previously i had a difficult time buying handlebar ends because they were mostly cosmetic, hardly any weight on them at all. (you need weight in order to cancel out vibrations.) and because most of this product is INSIDE the handlebar, is does not protrude too much out of the handlebar. (this is a minor cause for concern because if the motorcycle falls, the handlebar end will not have much protection. but the benefits of the vibration dampening outweight this.)View Detail
Average
EFFEX Handlebar Weight BIGข้อมูลตัวสินค้า ระบุแค่ใช้กับ Handle Bar ขนาด Outer Dia. 22.2mm แต่ไม่ได้ระบุว่าใช้กับ Inner Dia. 14 mm. ทำให้เกิดความเข้าใจผิด ไม่สามารถนำมาติดตั้งกับ Inner Dia. ขนาด 18-19 mmm. ที่มีอยู่ได้ View Detail
Excellent
It is easy to install.Installation is very easy, just tighten with Hexagonal Wrench.
I installed it on my VTR250, and the chattering feeling at the time of 1st gear acceleration was gone, and the vibration was reduced in general.
I was very pleased with the texture and it was exactly what I expected which is nice.View Detail
Excellent
This is an inexpensive product that is easy to install, but we clearly experienced the benefits.[How is it used?
Suppression of vibration transmitted to the Handlebar
Was the one you received as per Image?
Yes
Was the installation difficult?
No, sir. It generally took about 5 minutes.
How was your experience with it?
Unpleasant vibrations transmitted to the Handlebar were reduced, and hand numbness and fatigue were reduced to a large extent.
[Included Parts:were they on?
The hexagonal wrench used for installation was also included, which was convenient as there were no other tools to prepare.
[Was there anything that disappointed you?
No, there is not
Other items that would be helpful
I think that anyone can install it easily without instruction manual.
It will be installed inside the Handlebar, so there is no picture of it.View Detail
Very Good
Handlebar Weight to prevent numbnessI bought the CB1100RS because I ditched the Weight when I went back to the OEMHandlebar from the Separate handle.
I chose this one with the Weight in the Handlebar to reduce vibration, so I chose this one with the Weight at the same time as the Bar End.
When I tried to pull out the handlebar, I couldn't get it back because the tip of the handlebar came off and remained inside the handlebar.
I pushed Rubber into the billion and put a new Weight on it.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송