I installed it on my senior's ZrX 1100. Manufacturer who always takes delivery, but I knew the goodness of the finish of the product with the purchase of Rear Fender of the same Manufacturer, so it is a purchase procedure without hesitation! It is a Cover which has been finished with a texture like Matte Black in OEM so when purchasing a substitute - - - "This price is this price?" I thought so (Lol) Actually attached, there is a presence beyond expectation ☆ 彡 I have a presence, I wonder if it is better to say that the overall texture has gone up, not to break the whole Balance?
Installation is easy! Just remove the Fuel Tank and remove the Screw on the 10 mm socket! At the bottom of the OEMAir Cleaner Box there is a Guide-like convex, but the installed ZrX did not fit just with One Side, but Base is a resin I thought that it was an individual difference and assembled as it was. There was no problem with fixing. Those who are interested are Large durable just by cutting the concave of Carbon cover a little..
Small Paper Carbon parts, but it is a product that seems to be the value of exchange! Than I thought !!
Since I wished to form this into Carbon from before although it is a portion which is not conspicuous, it is satisfied.It is reliable, and there are no air bubbles, making is solid, and the product of the > A-TECH is beautiful. I think too that a genuine article is different.(*^epsilon^*;)
However, left-hand side did not enter easily but took pains over attachment.To the Carbon-parts lover, I think that we can recommend you.View Detail
There was a 6 mth delay to get product made, but it was made and shipped within approx 2.5 months. Excellent email updating all the way from webike.Product was well packed. I got the black plain and the black gelcoat was a bit thin along a couple of tight edges but quality of glass was good. Holes did not quite line up but very near, and with a bit of coaxing it all went together. I could not get the final pushpin holes to line up enough, so haven't bothered with pinning those. Quite secure without them anyway. Now I can work on the bike without pulling off the large lower cowlings all the time. I do very little cold or wet riding nowadays. I confirmed the fit to OEM upper cowling before purchase. All up I'm very happy with the purchase and the service I have received.View Detail
Although there may be individual differences, there are places where it interferes with the frame, so it is necessary to use cushion tape or moldings for the screen to prevent direct interference. If this is not done, a light crack will occur due to vibration. Also, to prevent deterioration [Color] Clear painting is required.View Detail
FRP was selected because it is intended to be painted. Mounting holes can be made without modification. Overseas Material:It is better than FRP products, but there are holes, scratches, etc. If you are concerned about them, I think you need to fix the Pate. I corrected the pate. I think the workmanship is good. I am concerned about the heat effect of the engine, but I put heat-resistant Seat on the inside of the engine. It may be just for comfort.View Detail
It's now July and I placed an order in January and still haven't received it. The shipping schedule has been stretched over and over every time it's due, and it's now the end of August. If you're not afraid to wait a year or so, you may want to buy this product.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송