Ninja 250 has a Holder under the Tandem seat, it is hard to use. At first I was using Tandem Footpeg co-clamping type, but it got disappeared by attaching Side Back, Top caseBracket. It became this item after a lot of twists and turns.
Easy to install, just tighten to Mirror. The feeling of use is very convenient. I do not put Helmet on Mirror, I am directly hanging through HelmetD ring directly.
Quantity : Pair (for Left and Right) Because the height of Mirror changes only slightly, you may be interested in the person you care about.
【What made you decide the purchase?】 I liked to hang Helmet with Mirror so I bought it as it was because I thought it would be OK as it was ... 【How was it actually used?】 First of all in my Helmetz-7 I could not lock the lock ... I just could not turn on it unless I used Wire. I had to open Single Seat every time I took that Wire and it was no good that my trouble did not change even if I turned on the Helmet holder. And when you find one disgusting thing you do not like it anymore ... 【Was it difficult to install? (Hard parts case)】 Just tighten Mirror and remove it. 【Please tell me the point of installation and hang (in the case of Hard parts)】 Please be careful not to drop it when you remove Mirror. 【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ] [Is there anything I was disappointed about?] Quite heavy place. Because we are lightweight Large like human ... 【Hope for Manufacturer - Please tell me if there are any improvements; I would like a light helmet holder. if you can! 【Have you compared items?】 Holder attached to Tandem Footpeg. I will buy it later and use it.View Detail
Easy to install in less than 5 minutes. However, being easy to put on is not easy to expect a security function by being easy to remove. Main function prevents Helmet's fall falling over Mirror. It also has a security prevention function that prevents you being brought by a service with Service. If you type Helmet on the side of the car body, it will be easy to get wet inside or rain at the bicycle parking lot, if it rains, but if it is a type that covers this Mirror, it will not get wet inside, even if it gets in your eyes It is less likely to get scratched because it is close. Also, it was also in Impre of other people, but installation Bolt seems to be easy to rust anything. After rain or car wash, add Grease and need anti-rust measures.View Detail
Fits: HONDA CB1300 SF 06 SC54 [Frame No.] SC54-1300001 to 1399999, HONDA CB1300 SF 05 SC54 [Frame No.]SC54-1200001 or later, HONDA CB1300 SF 06 SC54 [Frame No.]SC54-1400001 or later, HONDA CB1300 SF 08 SC54 [Frame No.] SC54-1500001 to 1519999, HONDA CB1300 SF 09 SC54 [Frame No.]SC54-1600001 or later
The installation is inconvenient. I'm nervous about the strings being hit. It is also a pain in the ass to store and pack them separately. The iron rusted easily. It is easy to get a scratch on the screen or the cowl.The price is fine, but I don't recommend it.View Detail
The OEM Helmet holder was damaged, so I installed this one. I bought this because it said it would work with my Jacket if I used the included wire. It's easy to install! I think it's great for when you need to get away from your motorcycle for a short time. (^O^)View Detail
The NORMAL Helmet holder is a bit difficult to use It's good because you can use the Mirror with the Helmet on it It's just one more key, which is a bit annoyingView Detail
This is a normal Mirror ClampType Helmet holder with nothing to write home about it's the DAYTONA product, so I have no complaints about the quality and price I'm not sure what to do with the wire, but I'm having trouble using itView Detail
CRF250L mugenSpec. Mounting on. I installed it in Right Side. After installing, one day, on the road "Helmet disappears?" It is said, go ahead, There was a person who was trying to bring Helmet, (I can not take it) Excuse me but I could smile.. At first glance, I do not understand. However, because Helmet is hooking on Mirror, Mirror will be a little dirty with the inside of helmet and kore, so be careful. If it is summer, if you catch it after running, it will dry soon so it is Recommendation! The position of the Helmet holder is (Handle mirror car only) If you do not like it, it will be good if you attach it to the Handlebar! However, if the car body collapses with the Helmet turned on, it will be erased by scratches ...View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송