Caliper support for 320 mm disc has some choices, but for the 300 mm Disc of D TRAX X, I could only find this and K & T, so I chose this cheap price. Although its shape is cool, it has almost no presence as it does not fit in the field of view. But in combination with OEMCaliper there is no dissatisfaction because only Support will float outstandingly. Accuracy is also good, more than one year after purchase, but there is not particularly trouble. Those who are considering disc diversion of D tiger X are recommended because it is somewhat cheaper to buy this and disc separately than those sold in Kit.
It is a Caliper support for enabling Rotor for D - TRACKER - X of 300 Φ. It looks beautiful in Billet parts. I think that it can be used for a long time because it seems to be solid Anodized. However, the length of the attached Bolt was different. I do not have the instruction manual in particular, I think that the quality of the product as a whole is bad. Even if Bolt's Length is different if the thickness of the mounting part is different, it is not so. The shorter Bolt seems to contain only less than half of the Screw hole of BrakeCaliper. Package at the time of delivery was in a state where it is wrapped in PetitPetit and Label is not pasted. I think that it would have been good if this was K & T.View Detail
To say that it corresponds to 220 mm disc, Caliper slightly interferes with Floating pin depending on disc. (Us, SHIFT UPSHIFT UP made EURO MOTARD Wave Disk Rotor 220 mm is used). Also, if it is replaced with Thailand OEMAluminum Wheel, it interferes with the Wheel spoke part unexpectedly.
Spec. Large machining is required for vehicles of the vehicle, please be careful when purchasing.View Detail
It is a Caliper support for enabling Rotor for D - TRACKER - X of 300 Φ. It looks beautiful in Billet parts. I think that it can be used for a long time because it seems to be solid Anodized. However, the length of the attached Bolt was different. I do not have the instruction manual in particular, I think that the quality of the product as a whole is bad. Even if Bolt's Length is different if the thickness of the mounting part is different, it is not so. The shorter Bolt seems to contain only less than half of the Screw hole of BrakeCaliper. Package at the time of delivery was in a state where it is wrapped in PetitPetit and Label is not pasted. I think that it would have been good if this was K & T.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송