-
구매후기
-
Center is somewhat - - -
이 상품은 삭제되었거나 현재 사용할 수 없습니다.
Average
Center is somewhat - - -Although I purchased it before and after, Valve hole Center slightly shifted. I cut it myself and made a hole.
If you try to force Center by forcibly, it will still deviate, so for Cost... I have a feeling..
Once pasted, Tire exchange etc etc. A little easy (?) I feel like becoming.
How much more do you have?.
Reviews For Current Product From Other Webike User
Average
Center may be slightly differentFront and rear attached to the WR 250 R,
Center does not suit, there seems to be an individual difference of products.
But you can drill a hole yourself so if you have a Cutter you can do anything.
It becomes an invisible place, but I feel that it seems to last long if I can afford it once.
Since the parts are parts it can not really feel the effect.View Detail
Excellent
To protect the Tire tube, Shreozu Items!For Rear is somewhat thick. Please be careful not to mistake for Front.
For details, I wrote in for Front, but for Rear is large in area and Rim is soiled easily, please clean and install it exactly.
If it is dirty Brass's Brush is the Recommendation.
Scrape dirt, degrease and paste.
Why are you sticking this stuff?
The protrusion at Rim (Junction of Spoke) It gradually badly affects the Tire tube little by little, because it causes Puncture, so protect it.
So let's make sure not to remove that protrusion!View Detail
Excellent
For installationWhen installing this product, you may need Dryer. After sticking to Rim and warming up with Dryer, check SIDE sticking and you can stick firmly to the concave and convex of Spoke attachment.
When pasting, firmly Parts cleaneretc. Let's paste after removing Rim's dirt by.
Also, when using BEETStopper you will have to open a separate hole.
When installing the Bead stopper, usually we attach Stopper to the lower side of Rubber, but please be careful because this product can not be installed on the bottom side.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송