- For STD Engine is the same as for Bore up if you change Needle, MJ, or PS.The change from PC20 makes a huge difference in the mid-range speed range.The maximum speed is also increased by simply replac...자세히보기
- [How is it used?PC20 was not sufficient for the 100ccOver bore up, so we purchased it for further power up.Was the one you received as per Image?The outer box was very luxurious, as it is for expensiv...자세히보기
- Perfect for Chaly too a modification to the gas line and the throttle cable, also the intake was modded cut and welded to angle..자세히보기
- I changed from PC20 a long time ago, but it's in-play since the setting finally came outFirst of all, it's a different torque than the PC20You can clearly feel that you are getting fasterHowever, I ha...자세히보기
- It's pretty good carburetor. Response I go to Beauty from bottom to top. Especially whether it is medium to high rotation or pleasant (Lol)Setting is difficult if you try to severe. City ride Spec...자세히보기
- Very texture is also good After installation the feeling of Torque is Up. The price is slight, but there is no loss concerning installation. Easy installation even without installation instruction man...자세히보기
- For APE 50 CB 50 jx (Only the Cylinder82CC) Use toExpansion at Router to make an intake man with stagesInstallation can go easy.The change stabilizes at 1500 rpm with 6 VPoint ignitionEven if it gets ...자세히보기
- I installed it in GORILLA Mukawa river head 4 VSquat 106 cc. Setting is completed at Slow 20 and Main 80. Since the carburetor bottom interferes with the Engine, it is clogs so I bite Angle Spacer. Ac...자세히보기
- Select for STD Engine and move with pounding.Unit 2 Engine is XR80CamSpec of APE 100 T type D. is.To connect with TakegawaInsulator for PE 27 of Unit 1 Engine, I bought a 3 mm thick Rubber board at Ho...자세히보기
- We installed 88cc for Honda's solo.Engine Displacement Volume is 49cc and Spec. Are as follows- DAYTONAHigh compression piston- KITACOHigh Camshaft- CD90OEMCrankcase&Cylinder head- Outside Cylinde...자세히보기
- 4 LMONKEY is installed.Engine Displacement Volume 108cc MONKEY, but it is very easy to handle, Idling also stabilizes badly, if it comes to it it will accelerate demons.Previously, I was wearing VM 26...자세히보기
- It is installed in 108ccBore upMONKEY.The price is somewhat expensive, but setting is also easy and it is very handy carburetor.I definitely recommend it..자세히보기
- I bought it daringly because I was concerned watching Review than before.Although switching from PC 20, impressions surrounded Smooth at low rotation, powerfully impressed elongation of medium to high...자세히보기
- I am using it for MONKEY Takekawa RStage 88Power comes out as well, depending on how you use it will be near Ritter 40I also get fuel economyIf it sets it well,I do not have to set it at all throughou...자세히보기
- It purchased, and followed and exchanged for APE100 and a Bore up.
Compared with the NORMAL, Power went up markedly.
자세히보기 - The feeling of a Torque from 0 start does not accumulate.
Although based also on the Setting, it was used with the Yoshimura cyclone and a maximum of 105 km/h was recorded.
Since the carburetor of ...자세히보기
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송