[How is it used?
It's installed to charge my phone.
Use this when using the Navigation app.
Was the one you received as per Image?
I've purchased the same product from Gun meta in the past.
It was just like the Image. It's a beautiful bright Blue color.
Was the installation difficult?
I've used KITACO's power supply extractor Harness.
It was easy
How was your experience with it?
It's charging fine, so...
It will be used for future touring.
[Included Parts:were they on?
It comes with two Electro Taps and a Tie Wrap or two.
I did not use either of them.
[Was there anything that disappointed you?
Not particularly
47,513.3 KRW (5,070 엔)
Webike Point: +51 pt
(477.94 KRW)
배송정보
-
Please select product form first.
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
Main unit dimensions: Φ19.8 x 70mm
INPUT: DC12V
OUTPUT: DC5V
Maximum current: 2A
Wiring length: 150cm
Waterproof specification equivalent to IPX5
**The image may contain other colors..
The bracket is designed to be tightened with the mirror, making it easier to install on the bike.
A waterproof cap is included to prevent dust and water from entering when not in use or when it rains.
The functions are still left as it is, but pursued easier control.
The color also makes the handle stand out.
■About the display of lighting
・Lights-out
Battery voltage less than 12.3V, not chargeable to the terminal.
・Blinking in red
Battery voltage 12.3-12.8V, engine start & battery charge required.
・Blinking in green
Battery voltage 12.8V or higher, good charging to terminal equipment.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Aug 9, 2021
Helpful?
Jan 14, 2018
Troublesome to reset by inserting and removing Cable
In the Instruction Manual
Please insert the USB terminal after power input and use. If you turn on the power while inserting the terminal, it will not respond etc etc. , It will not work properly.
This is true
12. If you plug in Cable first to Charger at 3 V or higher and then plug it into the smartphone, it will be charged normally. (It was not charged when it was reversed)
Try increasing or decreasing the voltage
Charging in progress 12. When it becomes less than 3 V, charging stops after that 12. Even if it reaches 3 V or more, it will not be charged properly. (The smartphone screen is in a charged state - - - It is necessary to re-insert Cable. Taking this trouble during Touring.
Since I was connected to my own Attachment power supply, I turned on the key after inserting Cable, so it was not charged properly.
It is better to connect this with Battery directly. In the Instruction Manual, the standby current when not in use is 0. Because it is less than 04 mA, you will not worry. - - - However - - - Battery is 12. If it is less than 3 V. Turn on Cable after 3 V or more - - - It is troublesome..
Helpful?
Aug 17, 2016
MINIMOTOMinimoto : 4764
Exclusive Accessories Power Supply Take Off 4-pole Coupler for HONDA GROM / It is use with MSX.
It was easy to install at the same time.
Turn off the terminal for Battery attachment and replace it with Bullet terminal ♂ terminal.
Just thinking that it is Wiring up to Battery, Wiring itself was too much.
Helpful?
New Custom Articles
