DevilHorn

Air Mount

[Supported reference models]
iPhone 15/15Pro/15Pro Max/15Plus/14/14Plus/14pro/14pro max/13 Pro Max/iPhone 13 Pro/13/13mini/12 Pro/12/12 Pro Max/12mini/SE 3/SE 2/11/11Pro/ 11Pro Max/X/XS/XR/XS Max/8/8 Plus/Samsung Galaxy/Google Pixel/Kyo Sera Torque/Sony Xperia/Sharp Aquos,OthersQI compatible models
130-175mm in length and 60-88mm in width
■Thickness 19mm or less


•Power5V 2A:QI15W/10W/7.5W/5W,USB(Type C)36W(5V3A/9V2A/12V3A)
*Charged at the power demanded by the model.

■12V input:Wireless charging and USB power supply can be used in connection with the vehicle's 12V power supply.

Waterproof:IP66Waterproof for sudden rain.

■Power Switch:ON/OFF only.
Power supply automatically starts up when receiving 12V from a 0V state.

12VWiring:1.75m discreet BlackDouble cord (Plus side is a line with White letters) (with Fuse holder, Bullet Terminal, Stag beetle terminal conversion possible)
Repair:WirelessCharger,12VAdapter(with USB power supply) is a separate structure and can be replaced.
Holder size:130-175mm in length, 60-88mm in width, 19mm in thickness

·Exchangeable sealing gasket:Aluminum Alloy Gold (Mount) + Reinforced PlasticPA66+GF
■Plate Thicknesst＝2.0mm■Weight51g:445g

■[Contents]
Body(1 inchBall)
Bar mount (1 inchBall/32mm/15mm width)
Diameter conversion Attachment (12/22/25.4mm)
2mmRubberTape
Hexagonal Wrench
60mm Intermediate Mount (with Security Type/12VAdapterHolder)
12VAdapterUSB power supply included,SAEHarness(Fuse holder/Bullet Terminal)
Conversion Terminal (Flat Y-shaped/Stag beetle terminal)
Tie Band

■Manufacturer Warranty Period:1 year (expires on the same day as the date of purchase)

**The charging position varies depending on the phone size and model.
*Please check the actual size including the requirements for smartphone accessories such as cases.
*The camera exposure is not included in the conditions.
*Please make sure that the size of your phone model is within the range.
*Please pay attention to thicker phone models and cases.
*If the phone case is too thick, the wireless charging distance will be insufficient and the phone will not charge.
*Cannot be used with battery-less cars or cars with 6V or 24V batteries.
*USB input is not available.
*If you are not familiar with voltage drop (including contractors), please wire the negative terminal directly to the negative battery terminal.
*Body grounding can be used only when the resistance between the negative battery terminal and the grounding point is confirmed to be 0Ω. Do not make grounding connections at points of unstable resistance such as the steering wheel.
*Note also the voltage drop due to the reduction of the contact area of crimped terminals.
*The grounding resistor has a normal voltage when no load is applied and a drop in voltage when a load is applied.
*To check the power supply, be sure to measure the load voltage under the following conditions. (Wiring is connected and circuit is established, power switch of the phone holder is ON, and the probe is placed with a gap between the SAE connector and the measurement)
*No-load voltage measurement is not a good or bad power supply.
*The intermediate mounts can be removed only as far as the angle can be adjusted by installing hexagonal bolts.
*There are cases that it contains other product in the photo.
*Please note that the product specification may change due to manufacturer reasons.
.