피스톤 지름:세로형 φ 19 (3/4인치) [*가로형 14mm상당]
대응 운전대 크기:φ 22.2핸들
레버 어드저스트 (5단계 조정 가능)
[부속품]
브레이크 스위치
·리자 바탄쿠
·알루미늄 탱크 스테이션
*밴조 볼트 (M10XP1.25) 는 별도 판매.
*밴조 볼트의 장착 위치가 아래로 클러치 호스 교환이 필요하게 될 경우가 있습니다. 사용 전에 반드시 확인하십시요.
*장착 전에는 본체 크기 그림을 참고에 충분한 공간을 확보하는지 꼭 확인하십시요.
*GSX-1300R하야부사 (99-08) , 강도 1250S (07-) 등은 핸들을 꺾는 때 마스터가 차체의 일부 (카울 등) 접촉하기 위해설치 불가.
*실리콘계 DOT5 (BF5) 부레키후루도는 사용하지 마세요.*스쿠터 등의 왼쪽 브레이크 마스터 실린더로는 사용할 수 없습니다.
*스위치 고정 나사에는 느슨해져방지에 레지록제가 도포되어 있습니다. 제거에는 충분히 주의하세요.
Piston diameter: Vertical Φ19 (3/4-Inch) [*Equivalent to horizontal 14mm]
Compatible Handle Diameter: Φ22.2 handlebar
Lever adjustment (5-way adjustment)
[Components]
・Brake switch
・Reservoir tank
・Aluminum tank bracket
*Banjo bolt (M10 x P1.25) sold separately.
*Because the mounting position of the banjo bolt is on the lower side, it may be necessary to replace the clutch hose.Please check before installation.
*Before installing the unit, be sure to confirm that sufficient space is available by referring to the dimensional drawing of the unit.
*This product cannot be installed on GSX-1300R HAYABUSA ('99-'08), BANDIT 1250S ('07-) etc. because the master touches a part of the body (cowl etc.) when turning the handlebar.
*Do not use silicone-based DOT5 (BF5) brake fluid.*This product cannot be used as a left side brake master cylinder for scooters.
*The screws used to fix the switch are coated with a threadlocker to prevent loosening.Please be careful when removing.