[How is it used?
HondaFTR223 (Past)
KawasakiD Tracker (Past)
KawasakiZ400 (Installed this time)
Used in the above 3 car models.
I have purchased three times because I personally felt the quality was good.
FTR223,D Tracker is used with DRC's Blinker, and for this Z400, the Blinker Bulb is replaced with a T10 LED bulb.
All of the above are flickering well as Blinker with no problems.
When I was using the D Tracker, it was used in Race and Off-road driving applications, etc..Large vibration is severe, but this product did not break down.
Was the one you received as per Image?
As per Image. I thought it came with an instruction manual, but the one I received did not have one.
Since there is a lot of information on the Internet, the installation was done without any problems.
Was the installation difficult?
Although there was no instruction manual, I was able to install it on the Z400 without any problems based on the information on the Internet.
However, there is a reason why it can be installed without problems.
The reason for this is that we have a service manual. It is.
Whenever I tinker with electrical components, I make sure to purchase and keep a copy of the Motorcycle Service Manual.
Service manuals always include a circuit diagram, which is useful when tinkering with electrical components.
Again, if you know what color the power and signal lines of Relay are, you can connect them with no problem if you have the service manual.
This installation on the Z400 vehicle was done with a Liang Maintenance loop and InHemp palmock in the location where the OEMBlinker relay was removed.
How was your experience with it?
My experience has always been satisfactory with no problems.
If you are not particular about the manufacturer of the LED-compatible Blinker relay, I think this product is excellent for the Large change cosmetics.
[Included Parts:were they on?
Bullet Type Terminal
[Was there anything that disappointed you?
It did not come with an instruction manual.
Items to buy together
Bullet Type Terminal in Emonetc.
The attached Bullet Type Terminal is not strong enough to recommend its use.
Service manual
- Instock
18,836.63 KRW (2,010 엔) 20,617.21 KRW Save 9%
배송정보
In Stock, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
XR230
-
CRM80
-
CRF230F
-
CRF250M
전체보기
HONDA
-
XG250 TRICKER
-
WR250R
-
SEROW250
-
WR250X
-
DR-Z400S
-
DR-Z400SM
-
KSR110
-
KLX125
09
-
KLX250
-
D Tracker 125
전체보기
KAWASAKI
Product detail
**일부 차종에서는 다음의 대책이 필요합니다.
*자동 점멸 장치 조종사 라이트, 포지션 등이 사용 불가.
*대표 차종:XR250, CRM250AR
*후 시어 조종사 라이트의 밸브를 뺄 필요가 있다.
*대표 차종:DR250R, 제베루 250XC, LANZA230
*전압이 안정되지 않은 차량은 설치 불가
*대표 차종:WR250F/WR450F는 전 연식 사용 불가..
밸브형의 정상 자동 점멸 장치를 MOTOLED자동 점멸 장치에 교환할 때 필요한 부품.
정상 계주는, 밸브형 자동 점멸 장치용으로 설계되었으므로, LED자동 점멸 장치에 교환했을 때 소비 전력 등의 차이에 의한 오작동을 일으키다. 그 오작동을 막는 LED자동 점멸 장치 대응 IC릴레이
IC릴레이의 장점과 단점
● LED본래의 전력 절약 효과를 살리다
● 릴레이 교환 작업이 약간 어렵다.
● 차량 1대에 1개의 설치에서 OK.*일부 차종은 정상 계주와 병용이
● 직류 차량 전용.
● MOTOLED IC릴레이 부착 후적 해이 상태가 될 경우에는 조종사 라이트 하네스가 필요합니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
![Since the purchase <br> attachment itself only attaches a terminal in order to exchange for an LED Blinker, just Colet of an easy <br>free D-TRACKER is insufficient, and since it becomes a Hazard, a Harness is also required as [ this ].](https://img.webike-cdn.net/photo/article/33/1376625539833M.jpg)
![a product is to an obstacle very small -- it is [ when ] very likable in a Size.Although explanation of the general wiring method about wiring is attached, if there is a wiring diagram of the Motorcycle currently used, I will think that it is intelligible.](https://img.webike-cdn.net/photo/article/88/1350967389988M.jpg)
![[Webike Monitor] It uses together with the Blinker of <br><br>drc.
I am carrying out order simultaneous lighting with my <br>.
<br> There are no abnormalities in particular.
It seems that this relay is required also when a Blinker for exclusive use is a](https://img.webike-cdn.net/photo/article/73/1342422608573M.jpg)
Fits:HONDA CRF250L , HONDA CRF250M , HONDA XR250 95-, HONDA CRM250R 89-90, HONDA CRM250AR 97-
Apr 22, 2022
Used in 3 different cars. The quality of the thing is good!
Fits:HONDA CRF250L , HONDA CRF250M , HONDA XR250 95-, HONDA CRM250R 89-90, HONDA CRM250AR 97-
May 25, 2021
Please tell me. (_ _) I can't get it to work.
I installed a LEDICRelay made by MOTO LED and the Blinker did not respond.
The other day, when I installed DRC's LED Fender Eliminator Kit, KITACO's Unbreakable lensMini Blinker on the front and rear of KLX250s, High flasher phenomenon occurred on the blinker. I installed the LEDICRelay made by Moto LED, but the Blinker did not come on.
Are there any other necessary parts that I need to install? Please let me know if you have any knowledge about this. (_ _) m
Fits:HONDA CRF250L , HONDA CRF250M , HONDA XR250 95-, HONDA CRM250R 89-90, HONDA CRM250AR 97-
Aug 22, 2020
I couldn't install it because I overlooked a key point.
I bought this to use on my WR250F, but I didn't read the instructions carefully and ended up not being able to use it ……
It's a product I didn't have to buy because it worked fine without this ICRelay on the WR.
I don't know when the corresponding vehicle will be available to me, so I'm keeping it just in case, but if I have a friend who wants one, I'll give it to them.
The thing itself is very carefully built and seems to be quite durable, as it is an Off Car Main brand.
Fits:HONDA CRF250L , HONDA CRF250M , HONDA XR250 95-, HONDA CRM250R 89-90, HONDA CRM250AR 97-
May 13, 2019
After replacing the valve, it was not reacted by SW ON Yellow light upside down, front and back lit up. I think it's defective. And I turned it back on flasher status. Will you replace it?
View DetailFits:HONDA CRF250L , HONDA CRF250M , HONDA XR250 95-, HONDA CRM250R 89-90, HONDA CRM250AR 97-
Oct 20, 2018
CRF250L mugenSpec. Mounting on.
For the company's LED Blinker back and forth installation, we replaced it.
You can remove the RightShroud and access it, but it took time to install it. (Somehow installed per the original position)
It is necessary to separately purchase a plug-in terminal and a Coupler.
There was a problem with the crimping of the terminal, it did not fit in the Coupler, it started again several times and it became usable. I think that it is good because I could exchange it before the OEM expired.
Position function is OK.
New Custom Articles
