The instruction manual is easy to understand and easy to install
The Handlebar position can be changed in three places, so you can adjust it slightly
But I decided to use Tie Wrap to stop the OEMMeter as it became difficult to install it
- Instock
73,697.16 KRW (7,864 엔) 80,594.56 KRW Save 9%
Webike Point: +79 pt
(740.34 KRW)
배송정보
In Stock (제조업체 창고 보관): 5 left, Ships around 24th Jul. 2025
Estimated arrival date around
FITMENT
SUZUKI
-
RM-Z250
05-06
KAWASAKI
Open Fit Model Information Table
-
KX250
05-08
-
KX125
06-08
-
KX250
19 *Only available when set on the front side
-
KX250F
05-18 *'15-'18 models only available when set on the front side
전체보기
KAWASAKI
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
대경 바 (28.6mm) 用
**키 변경에는 대응하지 않습니다..
라바 마운트 채용 차량에 간편하게 대경 핸들바를 장착.
라바 올리기 톱 클램프에서 대경 바 (28.6mm) 를 장착하기 위한 핸들 버크 램프 키트.
1피스형 핸들 버크 램프를 채용하고, 라바 마운트식에 흔한, 전도시 핸들의 갈등을 방지.
더 좌우의 버크 램프가 일체가 되는 강성이 업하다 특수 전용 볼트의 채용으로, 중심 (0) , 중심에서 플러스 4mm·마이너스 4mm전후 3단계의 위치 조정이 가능하다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Fits:YAMAHA WR250R 07-17, YAMAHA WR250X 07-17, YAMAHA WR250R 07-20, YAMAHA WR250X 07-20
Nov 28, 2019
Helpful?
Fits:YAMAHA WR250R 07-17, YAMAHA WR250X 07-17, YAMAHA WR250R 07-20, YAMAHA WR250X 07-20
Dec 16, 2017
I originally purchased the handle position to put it forward but OEM (28. 6mm)Spec. I feel like the reverse installation is not different
The height of the Handlebar is about 5 mm higher
Although it does not correspond to height change, if you have an environment to manage Washer and Color, you can respond to height change
The feeling of use increased with the information transmitted to Handlebar and the information of Tire and the condition of the road surface became easier to understand
As expected, the shape adopted by OEM Bridge type
Helpful?
Fits:YAMAHA WR250R 07-17, YAMAHA WR250X 07-17, YAMAHA WR250R 07-20, YAMAHA WR250X 07-20
Dec 13, 2017
I changed the OEMHandlebar to a Fat bar so I replaced the Clamp
Simple Clamp was also good, but it seems to be a Stabilizer and I do not know the effect well but it looks like Parenthesis so there is no problem
Once at Handlebar (Pro taper contour YZ - high) Bar pad attached to it was able to be installed without processing, the obstructive Handlebar Stubby attached to OEMHandlebar has disappeared and the mounting position of the Smartphone Holder has changed so that I am very satisfied.
Helpful?
Fits:YAMAHA WR250R 07-17, YAMAHA WR250X 07-17, YAMAHA WR250R 07-20, YAMAHA WR250X 07-20
Jul 2, 2016
Fat bar Purchase for installation.
WR 250 R was installed without machining. I installed it also in RMX but the color of the back side of Bridge is processed differently because Size is different. (Bolt pitch is OK)
Because it is rigid because of the linking type, it is not a Fat barAdapter used in overlapping with the NORMAL diameter, so it will not upgrade strangely.
However, as usual it was about half a year and the glow of the new item disappeared. The surface deterioration of ZETA's items is fast. I would like a solid surface Coat.
Why not treat it as a satin finish like Handlebar?
Helpful?
Fits:YAMAHA WR250R 07-17, YAMAHA WR250X 07-17, YAMAHA WR250R 07-20, YAMAHA WR250X 07-20
Apr 28, 2016
I purchased WR 250X to make it Taper Bar.
Although I was able to make it a Taper Bar a little cheaperly, I chose this as emphasis on appearance.
Installation can be done with 14 mm and 17 mm, but it is difficult, especially for Glasses, because the working space of Right Side is narrow. I think it would be nice to have tools that can be used in the back. It took about 2.5 hours for clumsy person to turn on this and replace Handlebar.
I do not know the effect, but the place that goes into sight will become cool and Tension will go up.
Helpful?
New Custom Articles
