I bought it to build it into my KLX250 from Carburetor Vehicles
To be honest, I wasn't expecting much, but out of the box, Big Li?
The texture of Anodized is high You're good, right? It was like
The holes in the Bead stopper are also drilled in the face of the Valve, and so on For some reason, there is a vacancy in the 90-degrees area for OEMs
Even the weld seams were treated by Beauty, which I thought was more Beauty than OEM
I'm not going to use it in a race, so I don't know if I need to go out of my way to buy XXK or D*D or something. lol
About assembly→ you will need a dedicated Nipple; Spoke is a cheap To give it a go, I polished the OEM and used it around LOL!
The machining accuracy is good, or maybe it's just a matter of applying Tension to Spoke, but the runout is small and easy We were able to take the runout to
Instruction ManualQuantity of a simple piece of paper:It's 1pc. so it would be nice if it had a few more instructions I'm sure the only people who buy this product are the ones who know that... lol
I'm very happy with the way it looks and the rarr; I'm already satisfied with Large It will look like a Motocrosser
I bought it as a replacement for a distorted Rim, but for the price of an OEM, outside RimSingle Item The price is so reasonable that I can even buy Nipple, which is very helpful
Only the Front was exchanged and it rode, but it was drawn by the goodness of Parenthesis, and it was sober I bought the Rear as well LOL!
154,629.09 ~ KRW (16,500 엔)
배송정보
-
Please select product form first.
Product detail
* 이미지는 참조용입니다. 이미지는 실제 상품과 다를수 있습니다.
·MX, ED레이스에서 사용을 목적으로 한 레이싱 스펙 림
림에 최적인 재질 알루미늄 A7050 T6을 사용하여, 단면 형상을 엄선
·강도와 무게라는 상반된 조건을 균형하는 것을 중요 항목으로 설계
현행 경기 차량에서 뻗어 폭넓은 라인 업을 전개
트레일 모델에도 최신 모톡롯사ー레벨의 하이 스펙 림을 설정
·쇠 니플에서 알루미늄 니플로 바꿈으로써, 전후에서 약 150g의 경량화가 가능
비드 스톱퍼 구멍:1곳 밸브 구멍:1곳 설정
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Jan 23, 2019
Jun 8, 2017
It is a replacement because the rim cracked. My model has a front desk, but there is no rear (We ordered excel) The aluminum nipple could also be exchanged without any problems. Just offset was aimed at the center, but my KX seems to be offset toward Left. By the way, OEM nipple does not fit.
View Detail
Oct 11, 2015
I bought for WR250F
My WR is 2013 USMODEL Rear wheel size is 1. It is 85.
Z-WHEEL Ze Wheel R 50 It is Rim, when Size is 2. Size up to 15
(Front will be same size)
What I thought was good was that in the case of WR 250 F, Nipple could use Yamaha OEM Product as it was
OEMSpoke could also be used
Depending on the model, you need to replace Nipple with Z - WHEEL, but you can check the compatibility chart that marks this area as well
Of course the product itself is satisfied
However, the Bead stopper is accompanied by Size up 2. 15 is necessary for replacement
As a digression I tried Challenge to Rim exchange at DIY with this purchase
At that time I purchased DRC Gyro Stand
This is also easy to use, there are also videos of how to use it is safe for the first time
New Custom Articles
