I can firmly hold the car body, once I attach it can not stop. It must be attached for 72 hours after installation, it can not be firmly bonded. Especially in the summer, it is not a problem even if not putting so much time, but when installing in the winter, we recommend you to warm it with Heat gun and then install it.
View Detail



















This picture was provided by our customers, which maybe similar but different product.
・이 옵션을 사용할 수 없습니다.
・다른 옵션을 선택하십시오.
77,436.37 KRW (8,263 엔) 82,468.85 KRW Save 6%
배송정보
-
Please select product form first.
Product detail
**스톤 프그릿프의 접착제는 점착력이 안정할 때까지, 24시간이 필요합니다. 완전 접착에는 72시간이 필요합니다. 완전 접착 전에 사용되었을 경우, 벗겨지고 버리거나 어긋나고 버리거나 하는 경우가 있습니다.
*프레임 면에 부착 타입의 스톤 프그릿프을 사용되는 경우에는 특히 주의하세요.
*스톤 프그릿프을 장착한 차량을 운전할 때는, 스톤 프그릿프에 직접 맨살이 닿지 않는 같은 복장으로 운전 하십시요. 직접 맨살이 언급한 상태에서 운전된다고 찰상 등 부상을 합니다.
스톤 프그릿프에 채용되고 있는 접착제는 너무 강력하죠. 스톤 프그릿프을 억지로 떼어 낸 경우, 도장이 함께 벗겨질 수 있습니다. 스톤 프그릿프을 떼에는 히트 암 등에 데웠던, 점착력을 떨어뜨리고에서 떼어 내세요.
(차량의 도장 상태에 따릅니다만 낡은 차량은 특히 주의가 필요합니다)
*개봉 후의 교환, 반품은 거절하고 있기 때문에 주의하십시오.
*점포와 공유 재고제 때문에, 재고 표시에 관계 없이 구입 시기에 의해서 결함품하고 있는 경우가 있습니다. 재고가 없는 경우에는, 주문 대응으로 한다 합니다.
*반드시 차량의 연식을 확인하고 주문을 부탁합니다..
**Stomp Grip adhesive needs 24 hours to stabilize its adhesive strength.Full adhesion requires 72 hours.If you use the product before it is fully bonded, it may peel off or shift.
*Please pay special attention to the use of stomp grips that are attached to the frame surface.
*When driving a vehicle equipped with stomp grips, please wear clothing that does not allow your bare skin to come into direct contact with the stomp grips.If you drive with your bare skin in direct contact with the product, you may suffer from abrasions and other injuries.
The adhesive used in Stomp Grip is very strong.If you remove the stomp grips forcibly, the paint may come off with them.To remove the Stomp Grip, heat it up with a heat gun or the like to reduce its adhesive strength, and then remove it.
(It depends on the paint condition of the vehicle, but older vehicles need special attention)
*We do not accept returns or exchanges after the package has been opened.
*Because of the shared stock system with the store, there is the case that it is out of stock by the purchase timing regardless of the stock display.If the item is not in stock, we will order it for you.
*Please make sure to check the year of your vehicle before ordering..
빵빵한 상처 방지 라벨의 같은 제품이 많은 가운데, 스톤 프그릿프은 피로의 저감이라는 기능 부품까지 진화한 라이딩 서포트 기어입니다.
스트리트에서 서킷까지, 다양한 상황에서 높은 지지를 받고 있습니다.
독자 개발의 에라스 트마 소재, 접착제는 강력한 3M사제 접착제를 사용.
빡빡한 라이딩 장면에서도, 어긋남 없이 패드 본래의 그립력을 유지합니다.
MADE IN THE USA!
스톤 프그릿프은 세계 각국의 탑 레이서, 톱 스턴트 라이더에게 애용되고 있습니다.
일본의 서킷, 거리에서도 대호평.
스톤 프그릿프의 애용자는 세계에서 격증 중입니다.
[스톤 프그릿프의 붙이는 방법]
1. 첨부면을 청소하세요.
(클리어를 사용의 경우, 더러움과 물때를 복식 등에서 깨끗이 지우고 작업을 하세요)
2. 첨부면 탈지를 하세요.
3. 위치 결정을 하십니다.
4. 공기가 들어가지 않도록 처음부터 붙이세요. 이면지는 붙이면서 뜯어 주세요.
(클리어를 사용의 경우, 처음부터 시간을 두고 조금씩 확실하게 천천히 붙이세요. 에어가 들어가지 않아 예쁘게 붙일 수 있습니다.)
스톤 프그릿프의 접착제는 점착력이 안정할 때까지, 24시간이 필요합니다.
완전 접착에는 72시간이 필요합니다.
완전 접착 전에 사용되었을 경우, 벗겨지고 버리거나 어긋나고 버리거나 하는 경우가 있습니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
MODEL PAGE LINKS
Delivery Information
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Fits:HONDA CBR1000RR 12-15
Fits:HONDA CBR1000RR 12-15
Average
Sep 7, 2016
There is no addition insufficient, usually
Wearing Denim and Nylon type Over Pants
When you multiply Brake, please skip to Tank,
Of course Knee grip will also slip so purchase.
Cleaning before sticking Degrease, position securely
You can stick it beautifully if you construct it gradually little by little.
Since it becomes easy for air bubbles to enter when repositioning
You may as well give up a little Gap.
It seems that it is also used in Race scene in terms of performance
I am satisfied..
Fits:HONDA CBR1000RR 12-15
Excellent
Nov 11, 2015
This is indispensable. Grip power enough to think that you can no longer. It is a word of wonderful. Especially for Separate handle use cars is absolutely no effect. Thanks to Knee grip making it easier, the burden on the wrist also decreases, and furthermore the riding position can be adjusted appropriately
View DetailFits:HONDA CBR1000RR 12-15
Average
Oct 31, 2015
Put it on Protection seal, then cut and paste
Assuming to peel off Protection seal
After pasting Carbon protector Line and
Cut on the top side of Tank Cover's BlueLine and paste it.
Since the knees do not hit the upper side than BlueLine.
Pasting while removing the release paper from the rear end of Tank Cover
After pushing the plane between the protrusions, not around the protrusions,
I pressed it with nails and stuck it in each column.
If you offset the body and press it with your thigh, the Grip effect
I think there is..
In my case scratch prevention is Large.
Fits:HONDA CBR1000RR 12-15
Very Good
Sep 30, 2013
It has attached also to the Motorcycle which had ridden before, and since it was very good, it purchases this time also.
attachment is not so difficult if position doubling and cleaning are carried out firmly.If it sticks little by little so that an Air may not enter, it will OK! Although it is hard to carry out the Knee grip not only of
CBR but the pure Tank, a Knee grip can be carried out even if not conscious [ that it attaches here ].
I feel that the size of a Pad may be small to a slight degree for the point worried individually.Is a little
difficulty an expensive place?