VALE. 듀얼 슬립온 머플러 M2블랙 시리즈 카본 사일런서

No problem to install in 2020Final
Tentative assembly without knowing if a Gasket is needed
Liquid Gasket is OK You should write it in the product introduction
Center stand stopper is not in there
Email & rarr to Webig; emailed by Manufacturer before replying and There is an email from Black Cat
No word from the vendor after that
Stopper arrived and the parts are fine, but there's no apology for the missing parts What's up with the Matsumoto EngineerRing?
Not a very nice person to work for
Silencer itself can be attached at any time, so it is possible to build Quantity:Pair (for Left and Right) Let's adjust the angle of the
Sound quality is Level with Baffle, but early in the morning and late at night be careful of your neighbors
You'll need a Hexagonal Wrench 4.5.6mm Spanner 12.14mm It was 3 hours of nervous positioning and even degreasing work

2017 ZX-14R H. G It attached to.

It was Slip-on Silencer which can be convinced to some extent by deducting it although it took only three turns and it took time to reach the purchase.

I think the item itself is also light and helps to lighter the body. I felt how the appearance of the Black series looked like, but Design was also Material : Carbon Style is unique and shiny and conspicuous. (Although the Silver Series compromised with a missing item, .... )

Although it is an exhaust sound, I think that the sound quality is not bad though it is Large as it is.
It is wearing a polon, but since there is no After, there is no ska even at low speed so it is a look at Normal computer.

Since the vehicle is still in the break-in stage, is it inconvenient if it introduces the Sub computer?

Center StandStopper was also included, but because the adjustment range was not so much and Center Stand hit Left Side Pipe, we secured Clearance by biting a 5 mm Rubber in the included Stopper.

Installation time is 40 minutes for amateur work. Since there is no Instruction Manual, it is working time while checking. I think that those who are becoming can be assembled more quickly.

If you can purchase at Sale, Two Brothers is a product of Recommendation.

This Brand was also used for other Motorcycle, but installation is also easy, it is a product that can be convinced to Design and sound quality!
ZX 14 R 17 year passed.
Recommended items.

I had a Two Brothers muffler on a Yamaha YZF R1 RN12 05. The sound in them is loud, bassy, ​​beautiful. Compared to my current Termignoni muffler, it is quiet compared to the Two Brothers. Carbon looks nice, but it's better to buy a titanium version.

I hardly see those who are installed. If it is a falcon Yoshimura or Wyvern etc. will be a standard product, but as a matter of mind I thought that other brands would be nice and I thought that I would jump off the stage of Shimizu and shuffled for purchase. Impre and information are too few to decide, so it was impossible for me to buy inside. It would be great if you could refer to those under consideration. After ordering, the schedule to receive it was about a month later, but I received it in about two weeks. It was packed in a standard cardboard box in a set. I took the weight scale and measured the weight with the least information. Silencer part is about 1 on one side. 4? + Intermediate pipe in the rear part from the catalyst is 0. 4?=1. Was it 8?. 2 in total 3. Is it?. Measure the genuine muffler in the same way left side 7. 2? (long) + Right side 7. 0? (short) Totaling about 14. It was 2? So it was 10. Weight reduction of 6?. Well, although it's fixed, I am at the level of replacing the tail lamps and rear winkers of the falcons. I tried challenging thoughtfully to make a change by myself..
Loosen the nut of the band tightened behind the catalyst, remove the nut of the tandem step and pull it back to be able to detach easily. To install it, first insert the intermediate pipe, then temporarily set the band in the silencer part, insert it into the intermediate pipe, temporarily position it, turn around the tightening bolts and nuts of the silencer band back and look at the balance Once tightened, it was easy to install. Assembly accuracy made overseas (It's rude way of saying) I can not imagine it's pretty. Gasket was not necessary. I think that it is better to tighten firmly.
Next is the sound quality. I tried using the P1X golden color of the baffle optional two bra. Sound is not a level that is noisy and ridiculous, it emphasizes heavier bass than normal and it is a big motorcycle when idling. Turning from acceleration to high rotation, it is not a surprising sound compared to normal time, but it feels a little uncomfortable. (Although it can not be said anything because it is an individual subjectivity) When I installed Yoshimura Tri-oval 4 in 1 in Black Bird in the past, I was irritated with the sound quality inside the tunnel, but this product did not feel it. Also remarkable is that the overhang of the silencer part fits inside the tandem step. The manual is English, but there are pictures so I could understand it. I do not know what will happen to glass wool in the future, but it is safe because Matsumoto engineering can repair.