I bought the CB1100RS because I ditched the Weight when I went back to the OEMHandlebar from the Separate handle.
I chose this one with the Weight in the Handlebar to reduce vibration, so I chose this one with the Weight at the same time as the Bar End.
When I tried to pull out the handlebar, I couldn't get it back because the tip of the handlebar came off and remained inside the handlebar.
I pushed Rubber into the billion and put a new Weight on it.
48,759.71 ~ KRW (5,203 엔)
Webike Point: +52~ pt
(487.31 KRW)
배송정보
-
Please select product form first.
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
[소재/재질]
균형자 샤프트부:놋쇠
엔드부:알루미늄
[엔드부 사이즈]
높이:35mm
핸들바 내 치수 155mm
엔드부 바깥:Φ 32/Φ 35 (테이퍼 형상)
[중량] 한쪽 1개:약 235g
[입 수] 2개 조
[사양] 이너 웨이트 타입
**순정 핸들바에 설치할 수 없는 경우가 있습니다. (기재 내측이, 150mm이상 있으면 설치 양 가)
*핸들 안지름 Φ 18-19 (핸들 첨단보다 150mm이상이 이 크기임.).
* 이미지는 참조용입니다. 이미지는 실제 상품과 다를수 있습니다.
노멀 핸들보다 쾌적하게 된다?
내장의 균형자 샤프트가 핸들 바의 진동을 경감.
주행에 의한 노면의 충격과 엔진 회전에 의하여 발생하는 작은 진동은, 차체의 중심부터 말단에 벗어날수록 증폭된다고 합니다.
에후에쯔크스·핸들바 웨이트는, 그립에 전해지는 미세한 진동을, 라바 마운트된 균형자 샤프트로 제대로 흡수
그 균형자 축에는 진동 감쇠 특성에 뛰어난 것부터 음향 기기의 제진 재료로도 사용되는 브라스 재료를 사용.
높은 진동 억제 효과를 발휘하고 기존의 바 최첨단부의 웨이트 증설형 이상으로 진동을 경감합니다.
주행에 의한 노면의 충격과 엔진 회전에 의하여 발생하는 작은 진동은, 차체의 중심부터 말단에 벗어날수록 증폭된다고 합니다.
에후에쯔크스·핸들바 웨이트는, 그립에 전해지는 미세한 진동을, 라바 마운트된 균형자 샤프트로 제대로 흡수
그 균형자 축에는 진동 감쇠 특성에 뛰어난 것부터 음향 기기의 제진 재료로도 사용되는 브라스 재료를 사용.
높은 진동 억제 효과를 발휘하고 기존의 바 최첨단부의 웨이트 증설형 이상으로 진동을 경감합니다.
빅 시리즈는, 최종 디자인은 크게 하면서도 균형자 샤프트와 무게 중심을 잃지 않는 최적의 무게 범위 내 거둠으로써 높은 진동 경감 효과를 실현하고 있습니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Aug 15, 2020
Handlebar Weight to prevent numbness
Helpful?
Sep 7, 2015
Large Looking for something heavy
I tried using HARDY HH 09 BK before, but it is still not effective for natural vibration.
Where I tried to change it to a heavier thing
I found this.
It is a change from 160 g to 230 g.
Attention is necessary because it is misleading with model number for 14 mm diameter.
(I came to beat the person who is nearly as small as possible)
Large in the Bar End has increased more than two times compared to the last item.
If you look at it, this Large Ki will rewind chic.
Installation is easy, but Normal handle was subtle.
What is it?
Handlebar Since the inside diameter was actually measured 18 mm, it seems that it will fit smoothly.
Included Parts : O-Ring for 18 mm as Quantity : 2pc. Set Included.
(The product has already been installed for 19 mm) ← good looking me.
I thought that it would not enter at all at all.
For 18 mm (Insert outer diameter should be smaller) Insert in place.
Well, it is still hard.
Once you pull it out and check it, some weakness on the Weight insertion side tip.
I guess it was because I put it in force.
After Slip (Not fixed and idling) It is likely to be a cause
Although I did not dare dare to paint it, I had no choice but to do it
Silicon grease applied to O-Ring.
I did not paint on the Rubber part which locks the tip collapsed.
Still it was hard, the last time I hit it a little with Praghan and inserted it.
I will pull out later Large seems to change... Is it such a thing?
After all I think that it is better to have a larger Large. (It may be your liking)
Depending on color (discoloration) I heard that the time to do is different.
Red, Blue seems to have the most influence of ultraviolet rays.
Now, how is the anti-vibration effect.
We can not ride on rainy days.
I will write it in the diary at a later date.
Helpful?
Jul 20, 2022
I bought this Bar End for Steel handle because I replaced Handlebar with HURRICANEConti2 type. The weight of the Bar End is not so heavy, but I am not sure if the Steel handle is wrong or if the Bar End is not heavy enough, but my hands are numb after an hour of riding. Would a little more weight solve this problem?
View DetailHelpful?
May 25, 2022
I bought Black because I am generally conscious of Black.
A BEET Taper Handlebar was also installed.
The vibration was also good because I could hardly feel it in my hands.
Helpful?
Jan 17, 2022
I bought this for vibration isolation!
I bought this product for anti-vibration purposes as I am converting my zzr1100 into a bar handle.
By the way, Handlebar is using Firena TEC's Medium.
It originally came with a small weight, but I wanted to reduce the vibration even more, so I decided to go with a big weight! (laughs).
As for the important vibration, it was reduced because the Bar End is heavier and has a core inside than the small Bar End of aluminum.
But don't be overconfident, because the vibration doesn't disappear in the whole area.
On my motorcycle, I get the most vibration at around 4000-4500 rpm.
I think this is the area where Handlebar and Bar End resonate with Engine's RPM.
You can't tell until you actually put it on, so I think it's best to put it on and see where the RPMs tend to go.
Helpful?
New Custom Articles
