I bought it for winter protection in the Kanto area and never froze when used with winter Gloves, which are not that thick.
Installation is also easy, as long as the RightMirror is co-tightened with the Mirror and the RightMirror has an Opposite Thread Screw.
The Bracket is solid and the Screen is strong enough to touch.
As is the fate of the SR400, the engine vibration is fine but shaky.























This picture was provided by our customers, which maybe similar but different product.
- 세일
・이 옵션을 사용할 수 없습니다.
・다른 옵션을 선택하십시오.
157,440.53 ~ KRW (16,800 엔) 164,937.7 KRW Save 5%
배송정보
-
Please select product form first.
Product detail
[소재] 실드 본체:포리카ー보 네이트제
Shield thickness: 3mm
Shield body: polycarbonate
[SIZE]
LENGTH: 150mm
WIDTH: 250mm
DEPTH: 80mm
Stainless steel screw
Polycarbonate Washers
Lock nut adopted
**Image 4 is color: It is Smoke..
* 이미지는 참조용입니다. 이미지는 실제 상품과 다를수 있습니다.
주행식보다 라이더의 주먹과 손가락을 보호하는 너클 가드.
실드 본체는 포리카ー보 네이트 제로, 색은 제거와 스모에서 선택할 수 있습니다.
충분한 강도를 맞춘 장착 스테이는 높은 풍압을 받아도 가타 운수가 나오지 않도록 고려된 형상을 갖고 좌우의 밀러에게 공체메할 만한 볼트 온 설계입니다.
● 클러치 측 측은 홀더의 틈새 스티드를 넣기로 도는 통제를 하고 있습니다.
● 브레이크 측은 마스터 실린더의 형상에 맞춘 스테이 형상. 도는 결정적인 역할을 다하겠습니다. [윈드 실드 비키니 카울과 동시 착용에 대해서]
폐사 『 가이라 실드 』 동시 장착도 가능한 설계입니다. 더 방풍 성능을 높이겠다고 생각하시는 분에게 추천합니다
『 로드 코메트 』 『 로드 코메트 클래식 』 에 대해서는 카울과 가드 본체가 간섭하기 때문에, 동시 장착 불가합니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
Delivery Information
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Fits:YAMAHA SR400 10-21
Very Good
May 27, 2022
Fits:SUZUKI GSX1400 01-08
Excellent
Jan 10, 2021
I bought it because I could not stand the strongest cold wave. When I put it on, it didn't look as bad as I thought it would, and I was more than satisfied with the Large effect. The cold wind hitting the fist is reduced, and I think that this is Large sturdy even without Grip heater. It is easy to install and remove, so I recommend it to riders who ride in the middle of winter.
View DetailFits:SUZUKI
Very Good
Aug 11, 2020
It is a necessity in the middle of winter, but it cannot be surpassed by this alone. After that, Grip heater installation. Still cold, Komine electric heat Gloves device. It's still cold. It looks like the image of the armor. But I can't repair the damage if I stumble on it. If you buy the AcrylicGuard part cheaply, you may be able to fit it to any type of armor. However, in winter, in order to change into Long Screen of SEA BASSOEM Product, if you cut all the Handlebar as much as possible, it will hit Screen. You may need longer bolts to remove the Handlebar and fit it back in. Also, please make sure to periodically retighten the Acrylic and Handlebar parts to prevent them from coming loose.
View DetailFits:HONDA X4 97-03
Excellent
May 10, 2020
Handlebar, Mirror, etc... not OEM, so it interferes with things a bit So I tried to add the Nut and it became good However, the Screen [Color] It's Smoke [Color] I bought Clear [Color] I repurchased Smoke
View DetailFits:KAWASAKI W800 11-21
Very Good
Jan 23, 2020
Motive for purchasing
Around November, that it's getting colder, you should try it from around! And more than one person recommended it to me Well, let's give it a try! And I decided to buy it on the spur of the moment!
It's a little bit expensive for what it is, but I thought it would be nice not to spoil its appearance I decided to buy it
Good points
All season glovesQuantity without Inner Gloves, even in the middle of winter:1pc. and I can stand it! (In Tokyo's 23 wards)
It is not that it is not cold, but there is a feeling that the wind is prevented for Large, and the cold of the hand has eased considerably!
It looks even better than I thought it would, and it's starting to look better and better Parenthesis!
The sticker by CHIC DESIGN that is included with the product is also very nice Parenthesis is good!
What I liked about it
Not particularly
The waiting period for my order has been longer than I expected, so next time I'll be able to order something like this I decided to buy the seasonal items early
Installation difficulty
Brake Side is easy to install as you only have to put the Bolt1 pc on it I was able to do it, but I removed the Clutch Side once, and from the back ScrewQuantity:The process of removing the 2pcBolt1 pc was a bit more complicated than I thought it would be, as I had to remove it It was