Well, well, well, well?
You may feel about the brush-boom effect by the combination technique with Full Exhaust System of YOSHIMURA.
It's not a dramatic change.
49,481.31 KRW (5,280 엔)
Webike Point: +53 pt
(496.68 KRW)
배송정보
This item is discontinued.
FITMENT
HONDA
Open Fit Model Information Table
-
GROM
MSX125
-
GROM
JC61
-
MSX125
Model]MLHJC618_D5000001-
-
GROM
MSX125
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
[체중]285g
*- [전원 필터 및 대직경 공기 덕트 설치 시 설정 정보].
- FI-CON2 (주입 컨트롤러) 스톡 엔진과 함께 사용할 때는 필요하지 않습니다.
- SP Takegawa의 e-Stage, S-Stage 또는 Super Head 4V+R Big Bore Kit를 사용하는 경우 설정을 변경하지 않고 사용할 수 있습니다.
- 본 제품은 모델 및 프레임 번호가 기재된 모델 전용입니다.. 다른 모델에는 설치할 수 없습니다.
- 제품이 막혔을 때 주기적으로 제품을 점검하여 세척 또는 교체해 주십시오.. 제품을 그대로 사용하면 성능 저하로 이어집니다..
[성분]
전원 필터 (미세 스폰지 요소 포함) x 1
거친 스폰지 요소 x 1
나사 (5x35) x 8
*수리 부품 링크가 없는 경우 견적 부탁드립니다.미상장품목따옴표
[문서]
수동 :일본인입니다
[온라인 카탈로그]
SP 다케가와 온라인 카탈로그 (일본어).
[제품 설명]
스톡 에어 필터를 교체하기만 하면 흡기 효과가 개선되며, 스톡 엔진에 장착해도 낮은 RPM에서 높은 RPM까지 전체 RPM 범위에서 출력을 높일 수 있다.
스톡 에어 클리너 박스를 그대로 사용하기 때문에 흡기 소음을 줄이고 내후성을 개선할 수 있다.
파워 필터는 두 가지 유형의 스펀지 요소, 거친 요소와 미세한 요소가 함께 제공됩니다.. 스폰지 요소는 용도에 맞게 변경할 수 있습니다.
흡기구 효과를 더욱 향상시키기 위해 SP Takegawa의 큰 직경의 공기 덕트와 함께 사용하십시오.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Fits:HONDA GROM JC61, HONDA GROM MSX125, HONDA GROM MSX125, HONDA MSX125 Model]MLHJC618_D5000001-
Sep 7, 2021
Helpful?
Fits:HONDA GROM JC61, HONDA GROM MSX125, HONDA GROM MSX125, HONDA MSX125 Model]MLHJC618_D5000001-
Jul 30, 2021
Good product by takegawa..fast delivery.good in packing .highly recommended webike Japan.service excellent.will repeat order again webike.
View DetailHelpful?
Fits:HONDA GROM JC61, HONDA GROM MSX125, HONDA GROM MSX125, HONDA MSX125 Model]MLHJC618_D5000001-
Dec 5, 2020
I don't think it's as effective as it could be to experience that much.
I think it is better to have it than not to have it, because I do power up a little. It's about
I think it's a good idea to install it without expecting too much!
Helpful?
Fits:HONDA GROM JC61, HONDA GROM MSX125, HONDA GROM MSX125, HONDA MSX125 Model]MLHJC618_D5000001-
May 10, 2020
There's nothing wrong with that
Since the Exhaust System was changed, I changed to this Filter It's easy to install because you only have to take off the screw and install it again It is recommended to install them at the same time, but the Throttle Body is made into Large caliber Unlike in the case of a Duct, whether the diameter of a mere Duct is slightly Large or Small, the air I don't think it would make a difference in the Level intake rate where viscosity would be an issue I haven't compared it, so I can't make a definitive statement, but just changing the Filter is enough So I don't think you should use the Large diameter Funnel, which is a pain in the ass to work with
As you can see when you remove it, the OEM Filter has an opening less than half the size of a plate body And this filter of Takegawa has an aperture at the center The intake resistance seems to decrease to Large width There are two kinds of Sponge, but because the rough one seems to let Garbage through, it is not possible to install originally I decided to use the fine-grained one that I had Still, I don't have the impression that the power is being suppressed by the intake at all
My Grom has a Red body color, and although you can't see it from the side, it's inside the Shroud I can see the red line on the filter, which is kind of nice There were a few comments about hearing the intake sound of the Exhaust System It is hard to understand because it is drowned out I think that this is also thanks to Exhaust System Powerful As expected, compared to the liquid-cooled DOHC 15 hp 125 (I used to drive a Duke 125), it's still I'm oobirding, but full throttle, full throttle! It's SmallItems, but it's very satisfying! I think it's custom parts
Helpful?
Fits:HONDA GROM JC61, HONDA GROM MSX125, HONDA GROM MSX125, HONDA MSX125 Model]MLHJC618_D5000001-
Installed on: HONDA MSX125 (GROM)
Apr 1, 2020
I have bought this air intake item, to continue building my honda grom, alreday equiped with 181cc Takegawa big bore kit. The result of installation, after simple manipulation with Fi controller, was good, as expected. Installation cause no problems at all, you will need a common tools for it, Tools, which are going with your grom, are enough. Highly recomended for purchase.
View DetailHelpful?
New Custom Articles
