스틱 온도 센서
Product # 07-04-0553
23,510.89 KRW (2,640 엔)
List price: 24,579.57 KRW Save 4%
+26 Webike point (231.54 KRW)
Product # 07-04-0553
23,510.89 KRW (2,640 엔)
List price: 24,579.57 KRW Save 4%
+26 Webike point (231.54 KRW)
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too.View Detail
정비사가 센서 분리를 서투르게 해서 손상을 입었다. 재사용은 가능하지만 혹시 몰라서 여분의 센서를 구입했다. 센서만 따로 팔아서 매우 좋다. 교체는 누구나 할 수 있는 수준으로 문제가 없다. 앞으로 엔진오잏 교체시 내가 직접 분리하거 정지소에 가는 것이 좋겠다고 생각한다. View Detail
Bought a complete set temperature meter previously but after sometime the sensor probe went faulty. Perhaps I over tighten it but anyway, it's working fine now. I bought 2 pcs due to the expensive shipping fees. View Detail
About quality and texture: I am happy with the quality of the temperature sensor stick from SP Takegawa. Made using a short electrical wire attached to the temperature bulb and using a small electrical connector that allows easy positioning when routing the wire.About the feeling of use: The temperature sensor 3mm diameter bulb fits perfectly into the SP Takegawa oil drain bolt and passes the signal for display on the compact LCD therometer but care must be taken during install so to not crush the bulb and during removal so to not pull the wire from the bulb.Products to buy together: A SP Takegawa oil drain bolt with the mounting hole for the temperature sensor stick would also be desirable to purchase along side the temperature sensor stick for a secure mounting.Difficulty of installation: The process to install takes about 5 minutes, use the included allen key from the oil drain bolt purchase to back off the grub and position the bulb into the bolt then lightly tighten the grub screw to avoid crushing the bulb. Connect the electrical plug and zip tie the wire in a suitable position to avoid being damage if just left hanging from the bottom of the engine. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a accurate reading temperature sensor made from quality parts that is plug and play with the SP Takegawa compact LCD thermometer. There are cheaper sensors available from Koso but am unsure if they would work with the SP Takegawa compact LCD thermometer.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: Keep in mind these compact LCD thermometers are only designed to read between 0 to 120 degress celsius so will not be suitable for all locations around the engine.View Detail
About quality and texture - Top quality. Perfectly manufactured sensor assembly with heat shrink at the temperature bulb end and electrical connector end to minimise temperature errors due to water ingestion.About the feeling of use - The reading from the temperature sensor to the display is flawless. On inital engine start up the display reads ambient temperature delivered from the sensor and as the motorcycle is riden the temperature display adjusts from the sensor reading at the oil drain bolt.Products to buy together - You will be needing at least a product to display the temperature reading the sensor will read and Takegawa have a few different options available here on Webike depending on your budget. Then if you would like the temperture reading at the oil sump, Takegawa offer an oil drain bolt to retain the sensor securely.Difficulty of installation - The sensor is very easy to install. A simple electical connection and then secure the sensor where you would like it to read the temperature.Cost performance and comparison with other products - I find the pricing good for such a handly product that makes my riding experience more enjoyable. I did not compare other brands temperature sensors as I required the one with the correct electrical connection for my Takegawa meter.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - Takegawa offer their temperature sensors in 3 styles, stick, M5 and B1. So select what best suits your setup.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.