[How is it used?
Valve does not run out.
About 10,000 yen.
The whole Unit is very Compact.
The heat dissipation design looks good.Gold color is also good.
Very bright and satisfactory.
Was the one you received as per Image?
Yes
Was the installation difficult?
fairly easy
How was your experience with it?
Satisfied
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
When assembling, do not damage the Valve.
- 오토바이 부품
- 전기/전자 계열
- 등화류
- LED 헤드 라이트 전구
- SPHERE LIGHT
- SPHERE LIGHT - LED 헤드 라이트 전구
- 상품 목록
- 바이크용 스히아 LED RIZING2 HS1











This picture was provided by our customers, which maybe similar but different product.
・이 옵션을 사용할 수 없습니다.
・다른 옵션을 선택하십시오.
100,508.91 ~ KRW (10,725 엔) 101,211.77 KRW Save 1%
배송정보
-
Please select product form first.
Product detail
** 제품 정보는 RIZIN II의 대표적인 사양입니다.
* 차종에 따라 가공이나 별도 부품이 필요할 수 있습니다. 적합표에서 확인해주십시오.
그리고, 장착이 안 되는 차종도 있으므로, 충분히 확인하신 후 주문을 부탁합니다..
**Product information is typical specification of RIZIN II.
*Modification or separate parts may be required depending on the model.Please check the compatibility chart.
*There are some models that cannot be installed, so please check carefully before ordering..
[Evolution]
더욱 진화한 리즈잉은 LED의 선명한 빛과 완벽한 배광 설계가 만들어내는 밝기로 압도적으로 쾌적한 야간시야를 제공합니다.
특이한 것은, 배광의 아름다움. LED 전조등이 빠지기 쉬운 조도의 치우침을 억제해, 얼룩없는 빛이 시야에 가득 퍼집니다.
RIZING가 만드는 경치를 경험하십시오.
[장착하기 쉬운 콤팩트 사이즈]
오토바이의 설치 스페이스에 맞춘 콤팩트 설계
길이는 노멀 할로겐과 별다르지 않기 때문, 다양한 차체에 부착이 가능하게 되었습니다.
[베스트 방열 설계 출 밝기 유지]
자연 대류를 낳는 독자 개발의 히트 싱크가 계속적인 냉각 효과를 실현.
열에 의한 광량 열화로부터 보호하고 안정된 품질로 사용할 수 있습니다.
[국내 생산]
RIZING는 나가노 현의 전문 공장에서 생산됩니다.
일본인에 의한 품질 관리의 전, 어려운 검사 기준을 충족한 제품만 출하하고 있습니다.
[장수명 저소비전력]
연속 점등 50000시간의 긴 수명이라 공 조각의 걱정은 불필요합니다.
게다가 소비전력은 노멀할로겐의 약 절반 정도이다.
전압 부하가 적어지기 때문에 배터리 트러블 해소에도 도움이 됩니다.
[터프한 주행을 견딜 내진 20G사]
다양한 진동을 테스트하는 자동차 부품 진동 시험 (JIS D 1601 4종 A) 에서, 이륜 차량 기기에 요구되는 20G까지 진동 가속도 시험에 합격.
오토바이 주행의 심한 진동에 견디고 터프한 달리기도 안심하고 사용할 수 있는 뛰어난 내진성을 실현했습니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
Delivery Information
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Excellent
May 2, 2021
No worry about running out of brightness.Compact
Average
Mar 18, 2021
Arrived in 3 days after ordering, saw it installed immediately.
The vehicle I installed is JA10CROSS CUB.
Takegawa's LEDKit failed as soon as the warranty expired.
Headlight was DC'd with the contents of the Kit, and I had God of thundergα on it.
When I was concerned about a lot of battery burden by DC conversion
I've been curious about this for a while, and I decided to try it out after finding the God of thunder g2 for both directions.
Headlight circuit back to AC (OEM) for installation
Does the color feel darker due to 4500K?
The brightness of both God of thunder Gu2 and God of thunder Guα are the same at 1800Lumen.
But God of thunder guα is White color light at 6000K, God of thunder gu2 is Sun Light at 4500K?
I think it's unavoidable because White and Hassle look brighter when Drilled.
By switching the headlight back to AC, the burden on the battery was reduced and the voltage was restored, which resulted in a large Merit.
Is the Cutline of the CROSS CUB horizontal?
God of thunderg2 will have a Line that goes up Left!
Takegawa's Light was made by PIAA, Line was horizontal, God of thunder guα was also horizontal (but two projections like a horn appeared)
The reason for this is that the Reflector is installed in a tilted position (it is installed in a tilted position in the OEM state).
It's nice to be able to see the Left on the Cutline when it's up on the Left, but I think the LED light is annoying to cars running on the Left Side.
I removed the screw that was locked and installed it vertically, and I saw two things that looked like horns on the Cutline.
This is also a symptom of God of thundergα and seems to be a product feature of this manufacturer.
When I put it back, the Right Side of the two corners became Small, and the Left Side became Large, and it became the Cutline of the left rise.
Oh, I interpreted it as a way to hide the glitch.
Because LED light is dazzling, the horizontal line is becoming more and more.
There are still more Left up vehicles, including Car, and as I mentioned before, Sun Light seems to be darker.
I've decided to use it as is.
Most importantly, I appreciate the 3 year warranty.
This vehicle is used daily for commuting, holiday touring, etc., so durability will be verified in the future!
I'd like to add a note when it breaks.
Very Good
Feb 22, 2020
It is one of the few LED headlights in the HS1 that is AC compatible
Long-awaited Headlight LED is now available
Second Type Model KSR Headlight is Multi- reflectorized
It is a little brighter than the First Model Type and can be driven in the city without any complaints etc., take care to drive at night
If it is the First Model TypeKSR, it is using PH7, so it can be used for AC compatible LEDs Conversions are easy to do as well, as there are various products from trusted manufacturers
However, there was no corresponding LED in HS1, and our predecessors converted to DC and used H4, or used AC I had assembled a suspicious LED of
I found out that the light distribution is Gap, or the DC converter can't withstand the voltage width of the large size It wasn't practical because there were so many problems with shorting and so on
In such a situation, we have finally developed a new product that is HS1/AC compatible and has a 160 V withstand voltage large-capacity condenser LEDs are now available
What is a NORMAL bulb, although it seems to consume less power than H4 = lower lm, assuming a moped You can't possibly compare, and the price is less than $10,000 after tax, and the 3-year warranty is a nice touch!
Needless to say, I ordered it as soon as the decision was made to release it
4500K wasn't popular = less manufactured? We waited a long time for delivery
But even if you have to put up with the wait, I think it's worth the exchange
You'll never use HiBeam, will you? The field of view expands so brightly that you may think "I'm not going to be able to see
On the other hand, if you choose HiBeam, the optical axis is too close to the Center, so it may be a little difficult to see
I dare to choose the 4500K for practicality rather than dress-up
I don't think I'll be riding in rainy weather much, but is it easier to see than the 6000K?
I'm curious about the installation..
In the case of KSRPRO, the Headlight's RubberBoots have been replaced by the Connector and It's an integral part and needs to be processed
I don't cut Boots to the Valve Width Limit and leave a lot of space between them
Waterproof performance may be reduced, but considering the volume of the KSR Light case And if it is too tightly sealed, heat is likely to build up
And since the LEDs are fanless, it's a Large width Cut for a little cooling
Others just sticks Wiring in the Connector without thinking, so even if you're a beginner, you can still use It's easy to install
Incidentally, the one you're currently using is the second one? to
The first one flickers immediately after installation (this is also written in the product package) It was shown
It said that increasing the rotation would calm it down, so I blew the Engine a little...
In less than 30 seconds, the light was unlit
This is the time for a reliable 3-year warranty
Needless to say, I sent out an Objection that day
As a result, I had to wait about two months before I got it back with a part replacement
He didn't give me the details of the cause, but was the Condenser puncture? That's right
I don't know whether it was a defective product due to the initial lot, or whether it was replaced by the countermeasure product, but the second one is stable It's lit
If you have purchased this, if the flicker occurs immediately after it is built in, you can use Controller I think it's best to think of it as a lifespan or defect in
No lights at night is dangerous, so please consult your dealer as soon as possible