The brightness, glow, and texture are perfectly fine and satisfactory, but the durability is too low.
I don't know if it's an individual thing or not, but in my case, it stopped lighting up less than 6 months after I bought it, and I had it replaced with a new one as compensation, but it started lighting up poorly again within a few months.
If it was a little more durable, I would have no complaints.
100,171.54 ~ KRW (10,689 엔) 103,086.06 KRW Save 3%
Webike Point: +107~ pt
(1,002.74 KRW)
배송정보
-
Please select product form first.
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
[사양]
대응 전압:DC12V전용
고정부: M8 볼트
칼라:갈색
법규: 차량검사 대응 (E마크 50R)
사이즈:길이 85mm (볼트 부분은 포함하지 않는다) 너비 23mm두께 20mm
[치수]
길이 85mm (볼트 부분은 포함하지 않는다)
너비 23mm두께 20mm
·제조업체 제품 1년
'스타시그널' 은 LED의 점등 타이밍을 시퀀셜 릴레이 시스템을 이용하여 컨트롤하고 안쪽에서 바깥쪽으로 심리스하게 연쇄 점등시킴으로써 선명한 인상을 남기는 '흐르는 깜빡이'.
세련된 디자인과 정교한 디테일
차체는 모든 차량에 친숙해지기 쉬운 매트 (무광) 블랙 마무리
소재에 아연 합금을 사용하여 질감 연출.
렌즈에는 시크한 '스모크' , 섬세한 '클리어' 의 2종류를 라인업하였다.
볼록렌즈와 확산렌즈를 조합하는 수피아라이트만의 구조로 높은 확산성과 가시성을 보장한다.
또한 세부적인 부분까지 꼼꼼히 만들면서 LED 칩이 표면에 노출되지 않는 정교한 디자인으로 한 차원 높은 퀄리티를 실현하고 있다.
'튀다' 바싹 마른 안전성
독일 오슬램제의 고품질 파워 LED를 등당 6발 탑재.
확실한 조사로 보행자나 타 차량에 대해 자차의 존재를 명확히 알리면서, 연쇄 점등에 의해 방향지시의 의지를 시각적으로 전달함으로써 안전성 향상에 공헌한다.
안심 보안 기준 적합 E마크
본체 이면에는 국제 연합 유럽 경제 위원회 규칙 (ECE규칙) 적합품임을 증명하다 'e마크' 를 각인
전력 소비와 조명 부분의 면적, 와트 수 등은 엄격한 보안 기준에 부합한다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Feb 9, 2021
Helpful?
Jul 11, 2020
Durability? And be careful when installing.
Model：XSR700
Installation Date December 2019
I bought it because I was attracted to its appearance and sequential emission.
Both front and back have been changed.
It cleared up my face area and the luminescence was fine.
It was a little difficult to install it because it is XSR700 which has poor maintenance.
But after about half a year, Left back Blinker does not turn on, and I buy again.
I thought I would install it again and spare the rest.
But I think I tightened the installation Nut a little too much, or the Rubber of Nut and Body came off I had to do it. I didn't tighten it that hard.
I had no choice but to use a spare.
I wanted it to be a little more sturdy.
Helpful?
Dec 31, 2019
Flowing Blinker Stand out (e.g. "I'll be back") It's cool
The letters engraved on the reverse side are Common For Left/Right Side, so one side is upside down
If you do not look carefully, you will not notice it, but it is a little bit of concern because it is White's indication in Black Quantity:Pair (for Left and Right) I wanted to have it made specifically for me
The material used is zinc alloy gold, so the weight is quite heavy
The LEDs are a beautiful brown color and have quite a bit of light
It looks nicer and flows blinker cooler than the OEMs
Japanese Vehicle Inspection Correspondence (EMark 50R) So you can install it with confidence
It is Wiring of installation, but because Wiring of the Bolt part is bare, there is some kind of I think that Waterproof and protective measures are necessary
In this case, I installed it on my Lear Fender Eliminator
I wanted to put a blinker base on the mounting part, but because the Bolt length is only 20? It was not long enough A little longer would be good
It is difficult to install the Front without the blinker base, so I gave up installing it It would be better if it was longer A little longer would be nice
Helpful?
New Custom Articles
