Cost performance is high since it is 2 units for this price. I used D-UNIT without taking out from Brake switch.
View Detail











This picture was provided by our customers, which maybe similar but different product.
- 세일
- Instock
・이 옵션을 사용할 수 없습니다.
・다른 옵션을 선택하십시오.
29,566.96 KRW (3,155 엔) 35,611.55 KRW Save 17%
배송정보
In Stock, Ships within 24 hours.
Estimated arrival date around
Product detail
[배선장]
·+측:약 180mm
·-측:약 800mm
·USB측:약 500mm
1포트 출력 2.4A
ACC접속 단자:187형
3A퓨즈부
보호 기능 (USB 출력 과전류 보호 출력 쇼트 보호 입력역접속방지 과온도 보호)
**12V전용. 6V/24V차 불가.
*브레이크 스위치에 평 슬라이드 단자를 채용하지 않은 차량에는 장착할 수 없습니다.
*화상에는 다른 타입도 포함되어 있습니다..
[wire length]
・+ side: Approx. 180mm
・- side: Approx. 800mm
・USB side: Approx. 500mm
1 port output 2.4A
ACC connection terminal: type 187
With 3A fuse
Protection function (USB output overcurrent protection, output short circuit protection, input reverse connection prevention, overtemperature protection)
**12V only.Not for 6V/24V bikes.
*For bikes that do not use a flat terminal for the brake switch, it is necessary to secure power from another accessory power source without using the included brake switch removal wiring.
*Images may contain other types.
*Battery installation is not possible.
*There may be changes in product specifications due to the manufacturer's reasons.
.
전원 꺼내는 브레이크 스위치의 평단자에 삽입만 하면 되므로 장착이 간단함.
전원 공급은 메인 키에 연동하고 ON/OFF됩니다.
스마트 폰과 태블릿의 충전도 여유 출력으로, 1포트 5V2.4A출력을 실현.
핸들 클램프와 부착식에서 설치 방법을 선택할 수 있습니다.
전원 삽입구를 가리는 방수수지 캡으로 갑작스러운 비에도 안심.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
Delivery Information
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Excellent
Feb 12, 2022
Easy installation☆Current condition, no quality problems!
The only installation is to interrupt the brake switch.
The rest of the work was done while looking at the Instruction Manual.
As long as you have the tools, even amateurs will have no problem at all.
However, since the Earth needs to be cotightened with the Bolt somewhere in the Frame, it may be a bit of a challenge for the Scooter, which may need to remove the Cowl.
We installed it on our PCX (2021 model).
I think the price is a little high, but I am generally satisfied.
Very Good
Dec 25, 2021
Wiring is now easier with 2 ports.
[How is it used?
It is used as a power supply for mobile phone, Radar detector and ActionCam. (One is spare.)
Was the one you received as per Image?
I used to use a 1-port product, so I was able to grab Image.
How was your experience with it?
The wiring became simple because it became two ports, and the handling of the wiring became easy.
I don't think there is anything wrong with its performance as a power supply.
[Points to note]
There is nothing in particular, but it is important to think about the handling of Wiring well in case of Fuse replacement.
(Depending on how you handle the Wiring, you may have to replace the Fuse to get the Tank up...)
How did it compare to other products?
I don't know how it compares to other products. (Because I haven't used other company's products)
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
The point of installation is to get the power supply from Battery via ACCRelay to stabilize the voltage.
You can easily remove the power supply with Relay by using a 4-pole Relay. (The 4-pole Relay must be purchased separately.)
The other thing about Wiring is to use the Bullet Type Terminal to ensure a reliable connection.
It's a hassle, but if you neglect this, it can cause a broken wire or Short, so if you don't have these tools or materials, it's better to leave it to a Motorcycle shop.
Very Good
Nov 21, 2021
I installed it for WirelessCharger and Radar.
The work would take about 30 minutes if it was just installation.
I connected to D-UNITPlus instead of from Brake.
It works fine
Excellent
Sep 26, 2021
USB power supply is this one after all
This is the standard USB power supply of DAYTONA. I thought about storing the IC part under the seat, but since I brought the WR power unit body under the front cowl, I installed it in the same place. I am highly satisfied with this product and recommend it.
View Detail