[핸들키트 사양]
컬러:슬레이트그레이 (양은 마무리)
권장 부품
·PRO-GRESS1템프볼트미터
브레이크 레버가드
그립 라바 세트
[퓨얼 탱크 카울 사양]
■ 재질: FRP
부속품: 없음 (장착 시에는 정품 볼트 등을 사용합니다)
■ 카울 컬러 공통 권장 파츠 : 윈도우 아머
■ 카울 컬러별 권장 부품
·어퍼 카울용 스즈키 순정 '칼' 로고 스티커
보티컬러:미스틱실버메탈릭 (YMD) 用
스즈키정품번:68685-07L00-BWS
필요수:2매
권장 컬러: 무도장 (블랙) , 실버 (순정 근사색 도장 완료)
·어퍼 카울용 스즈키 순정 '칼' 로고 스티커
보티컬러:글라스스파클블랙 (YVB)
스즈키정품번:68685-07L00-BWT
필요수:2매
권장 컬러: 무도장 (블랙) 블랙 (순정 근사색 도장 완료)
*핸들킷과 순정 퓨얼탱크 카울의 병용은, 핸들을 꺾었을때 카울과 접촉하기 때문에 매우 위험합니다. 또한 핸들잠금도 기능하지 않습니다. 반드시 요심라 퓨얼탱크 카울과 함께 사용해 주십시오.
*구조변경에 대해서. 핸들키트를 장착하는 것에 의해 차량치수가 변경되어, 구조변경의 신청이 필요합니다. 반드시 고객께서 장착 후의 차량치수 (전고, 전폭) 를 측정하여 관할 운수지국에 구조 변경을 신청하시기 바랍니다.
*퓨얼탱크커울·어퍼커울은 도장을 전제로 한 제품입니다. 그대로 사용하시면 변색·퇴색의 우려가 있습니다.
*무도장 표면은 도장 전 노출처리 되어야 합니다.
*표면 (도장면) 에는 굴이나 굴곡이 있는 경우가 있습니다. 소재의 성질상 불가피하기 때문에 클레임 보장의 대상이 되지 않으므로 미리 양해 바랍니다.
FRP 제품의 특성상 수축에 의해 볼트 구멍 위치가 어긋날 수 있습니다. 이 경우 줄 등으로 구멍 위치를 수정한 후 부착하여 주십시오.
*적절한 자격과 지식이 있는 사람이 제품을 장착하세요.
*이미지의 스즈키 순정 '칼' 로고 스티커는 상품에 포함되지 않습니다.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
[Handle kit specs]
■Color: Slate gray (anodized finish)
■Recommended Parts
PRO-GRESS1 Temp Bolt Meter
Brake lever guard
Grip Rubber Set
[Fuel tank cowl specs]
■Material: FRP
■Accessories: None (use stock bolts, for installation)
■Recommended parts for all cowl colors: Wind Armor
■Recommended parts by cowl color
・Stock Suzuki "Katana" logo sticker for upper cowl
Body color :For Mystic Silver Metallic (YMD)
SUZUKI stock part number :68685-07L00-BWS
Number of pieces needed:2 sheets
Recommended colors:Unpainted(Black), Silver(Stock approximate color painted)
・Stock Suzuki "Katana" logo sticker for upper cowl
Body color :Glass Sparkle Black(YVB)
SUZUKI stock part number :68685-07L00-BWT
Number of pieces needed:2 sheets
Recommended colors:Unpainted(Black), Black(Stock approximate color painted)
*The use of the handle kit together with the stock fuel tank cowl is very dangerous because of the contact with the cowl when the handle is turned.The handlebar lock will also not work.Be sure to use with the YOSHIMIURA fuel tank cowl.
*Structural Modifications.The installation of the steering wheel kit changes the dimensions of the bike and an application for structural modification is required.Please be sure to measure the vehicle dimensions (height and width) after installation by the customer and apply for structural change at the Transport Branch Office with jurisdiction.
*Fuel tank cowl and upper cowl are intended to be painted.There is a possibility of discoloration and fading if you use it as it is.
*Unpainted surfaces need to be beveled before painting.
*The surface (painted surface) may have pores and unevenness.Please note that this is inevitable due to the nature of the material and is not covered by any claims or warranties.
*Bolt hole positions may shift due to shrinkage of FRP products.In this case, correct the position of the hole with a file or the like before installation.
*Installation of the product must be carried out by a person with appropriate qualifications and knowledge.
*The Suzuki stock "Katana" logo sticker in the image is not included in the product.
*There may be changes in product specifications due to the manufacturer's reasons.