The JC92 Grom uses LED lights, but only the Blinker uses Halogen lights, which made me feel uncomfortable.
I felt that the design was still prioritizing low cost, so I considered changing to LED.
After much research, I chose Takegawa for its compatibility and quality.
The result is Large satisfaction.
The Japanese specification Grom also lights up the position as it is.
Body is Material:Black Anodized Aluminum with Material at the base of the mount.:Rubber reduces vibration.
A plate is also included to hide the large hole left in the body when replacing the OEM Blinker. This plate is also cut out of aluminum and has a black anodized treatment.
The replacement work can be completed in about one to two hours if you read the instruction manual carefully beforehand and have the corresponding tools.
I also worked on the Fender Eliminator Kit at the same time, so it took a little longer.
The License Plate Light is not an OEM replacement, but comes with a SMART Small Type LED light. Therefore, some wiring modification will be required.
The Electro Tap is included in the kit, but I modified the Bullet Terminal in consideration of the possibility of removing it later.
In general, the quality was good enough to justify the high price.
However, if it was a little more Reasonable, I would have been even more Large satisfied.
The only thing is that it also comes with an LED-enabled Relay, but its Material:The RubberMount comes with a 90-degree gap in the direction of the mount, and the OEM mount is the same type that faces the same direction, so I used the OEM mount instead of this one.
- Instock
352,826.1 KRW (37,649 엔)
배송정보
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
Product detail
**MSX 그로밋 (MLHJC92) 모델 구조상 전면 위치등이 없습니다.
*이미지에 다른 제품이 포함되어 있을 수 있습니다.
*제조업체 사정으로 인해 제품 사양이 변경될 수 있습니다.
.
컴팩트하고 슬림한 차체의 LED 표시기.
고품질의 경량 알루미늄 차체가 사용되며, 고무 마운트는 내구성과 진동 저항성을 모두 제공합니다.
모양은 가장자리가 있는 유선형 및 혁신적인 설계를 기반으로 합니다.
표면이 무광 블랙 페인트로 마감되어 겁 없는 이미지를 강조하며, 표면에 SP TAKEGAWA 로고가 그려져 있다.
5개의 고강도 내장 LED는 밤낮으로 시야를 개선합니다.
또한 LED를 사용함으로써 소비전력은 약 1W입니다. (12V에서) 백열등보다 훨씬 적은 1개당.
전면은 스톡 포지션 램프와 같은 방식으로 점등할 수 있다.
LED 표시등에는 와이드 레인지 플래셔 릴레이가 포함되어 있습니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Fits:HONDA GROM (JC92-1000001 or later), HONDA MSX GROM (MLHJC92)
Jan 13, 2022
High quality with aluminum body
Fits:HONDA GROM (JC92-1000001 or later), HONDA MSX GROM (MLHJC92)
Jul 15, 2021
To make it a little less grasshopper-y.
We said goodbye to the New Model Grom's grasshopper tentacle-like Blinker.
I was curious about the large Blinker that is disproportionately large for the vehicle size both front and rear.
I thought the front blinker was too big when I was driving, so I changed it to a slim one.
The front can use the included Blinker mount as per the instruction manual, but the rear has been replaced with an Endurance Fender Eliminator, so the Blinker mount was not used and it was installed directly. (Confirmed with Manufacturer)
The work itself took less than an hour.
The Front is still insect-like, but I'm satisfied that the Rear is pretty cool.
The illumination of the front position and the blinking illumination when the blinker is activated are both bright, and the visibility from the car seems to be good.
The most difficult part of the installation was getting the Wiring from the Blinker through the High Nut.
The Instruction Manual says to pass one pc at a time, but I had a hard time because the WiringBoots were in the way.
I wonder if it would be possible to work Smooth if I had the length of the power supply and Grounding Wire changed a little.
New Custom Articles
