Purchased to equip CT110 HUNTER CUBCT125 in winter.
When worn at the same time as Komine's Handlebar Cover, summer Gloves temperatures below 5 degrees Celsius are not a problem when MAXMODE is in use.
To plug in the retrofitted USB, I used DAYTONA CONNECTOBoots + Tie Band for rain protection. It seems to be no problem.
The only concern is that the grip heater will make the grip diameter thicker, making it a little harder to grip.
77,066.25 KRW (8,228 엔)
Webike Point: +82 pt
(768.03 KRW)
배송정보
Out of stock at the manufacturer.
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
[사양]
· USB 연결 5V2A
·컨트롤러 포함
** 출력5 V2.1A이상의 충전준비하세요.
* 출력이 1A인 USB로 사용하면 절반밖에 데워지지 않으니 주의하세요.
* 일반 손잡이 (22mm 핸들용: 외경Φ30mm -Φ34mm) 대응합니다만, 느슨함이 신경 쓰이는 경우는 부속 결속밴드에서 보조해 주세요.
* 아메리칸 등의 굵은 손잡이 (인치핸들용) 에는 비대응입니다.
*화상에는 다른 상품이 포함되어 있습니다.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
.
차량에 대비한 USB 플러그 (Type-A형) 에 접속하는 모델
코드상에 대비한 컨트롤러 (내수설계) 로 히터의 온/오프 및 3단계 온도 조절 가능.
[클립 그립 히터]
■원터치 탈착
설치는 '끼우고 전원 연결' 할 뿐
분리도 간단해서 '계절에 따라 분리, 여러 바이크로 돌려가며 다루기' 것도 가능합니다.
일반 핸들 그립 (22mm 핸들용: 외경Φ30mm -Φ34mm) 대응합니다만, 느슨함이 신경 쓰이는 경우는 부속 결속밴드에서 보조해 주세요.
아메리칸 등의 굵은 손잡이 (인치핸들용) 에는 지원하지 않습니다. *특허 취득 완료*
■전력을 효율적으로 이용.
열변환효율이 높은 히터소재를 채용하고 가열면을 집중화함으로써 10W라는 전력을 최대한 활용할 수 있도록 설계했습니다.
그립 교환형에 비해 핸들 파이프의 열손실이나 좌우 두께의 차이에 의한 온도차이도 줄일 수 있습니다.
'10W는 윙커와 같은 정도의 전력으로, 히터 제품에 흔한 배터리가 나갈 염려도 거의 없습니다'
그립교환형과 같은 열량을 원하는 고객은 다소 부족할 수 있으나 편리성과 기능성의 균형이 뛰어난 제품입니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Jul 28, 2022
Helpful?
Jan 22, 2022
A winter necessity for mainly city driving.
I was looking for a removable Grip heater, but this Clip type product seemed to be easy to install, so I bought it.
I installed it on my PCX150KF30 and it works fine without the Tie Wrap.
The grip is thicker, which makes it unsuitable for sports driving, as it makes your palms feel tight for a long time.
The PCX doesn't require much accelerator operation, so it's just fine, but I'll remove it when it gets warmer.
It is not designed to heat up the entire grip, so it is used exclusively for fingertips, but I use the Handlebar Cover with it, so I think I can handle it even in the middle of winter.
I connected it to the ServiceCoupler- using a DAYTONA USB power supply, but it was warm enough.
Now I just have to see how long it will last.
I should have bought it sooner.
Helpful?
Dec 23, 2021
It is easy to install, simple but effective
I thought it would be good if I could use it only in the cold season, and I thought about the electric heating Gloves at first, but from the experience that I bought and used the electric heating Gloves several years ago, I couldn't do anything when the battery ran out, and the battery part was bulky, and the fit was not good. Then, I considered the wrapping type Grip, and I decided here that it was easy to put on and take off, could be powered from USB, and could adjust the temperature.
This product fits directly into your Motorcycle's Grip and plugs into the USBJack for easy installation.
There is a bit of resistance when fitting the product into the Grip, so it fits tightly, but if it gapes during use, you may want to use a Tie Wrap to secure it.
I installed it on my Yamaha SCR, but the grip on the Left side shifted outward, so I used a Tie Wrap to keep it from moving.
By inserting this product, the grip (22.2?) of NORMAL becomes thicker.
It seems that there are many people who feel uncomfortable that the Grip becomes thicker, but I do not feel uncomfortable because the feeling that I gripped is about to become the thickness of the Inch grip (25.4?) of the Cruiser system.
It's the heating effect that's important, but it can be adjusted by switching between three levels.
I use Three seasonGlove in the daytime (temperature 15~18℃) of October-November beginning Low." From "Inside about (when it is cold in the morning) "strength" ), daytime (about 15°C) in November. "Inside From "strength" In the daytime (around 10 degrees Celsius) in December, the winter Glove "strength" It is used in
As you can see, in December, it's not as good as a replaceable Grip heater.
It's more than warm. "Lukewarm." But even with this product, my fingertips don't get itchy.
The Heater part covers about half of the Grip's circumference, so you can decide where to put it (palm or fingertip) according to your preference. By the way, I choose the position so that my fingertips don't get bitten.
The difficulty is Waterproof of the USB power supply part.
Because it is bare, it is necessary to take measures to waterproof the feeding part when using it in the rain (I refrain from using it in the rain).
Helpful?
Dec 18, 2021
I guess it's better than nothing.
Even on the highest setting, the part where the Grip heater hits is slightly warm, but the rest of the body is not warm, so it's better than nothing.
I think that the electric heating Gloves that warm the whole hand are more effective!
Helpful?
Dec 8, 2021
This is my first Grip heater.
Because it is not a Type built into the Grip, it does not warm the entire palm of your hand, but it warms it enough. Of course, the back side of the hand is cold.
It is necessary to pay attention to the Grip because it becomes damaged when you put it on and take it off. At first, it wraps around the Grip tightly, and the position does not change even if Axel is twisted, but it comes to gap when using it.
Waterproof Specification, but I don't use it on rainy days because I don't want it to break.
Helpful?
New Custom Articles
