I used it to attach Radial brake master to Motorcycle with ABS.
OEMHose was missing, I had to extend 5 cm.
Since it will be exchanged only above ABSUnit, air bleed etc. etc. Although it was easy, since it becomes an important part, installation - It is necessary to carry out maintenance reliably.
Frame - Wheel is BlueColor - Since the body is Silver, PlatingHose and Banjo of BlueColor are matching.
43,436.72 ~ KRW (4,635 엔) 51,543.03 KRW Save 16%
Webike Point: +46~ pt
(431.08 KRW)
배송정보
-
Please select product form first.
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
소재:알루미늄
소켓 칼라:도금
호스 칼라:훈제
**차체에 장착에는 유니버설 호스 외에, 밴조 어댑터, 밴조 볼트, 와셔, 부레키후루도가 필요합니다. 별도 준비 주세요..
* 이미지는 참조용입니다. 이미지는 실제 상품과 다를수 있습니다.
브레이크 호스는 『 호스 』 『 어댑터 파트 』 『 볼트 파트&와셔 』 의 3그룹의 부품을 조합해서 구성되어 있습니다.
단일 브레이크 호스를 만들까지 기술과 특수 공구, 그리고 준공 후 검사를 필요로 하기 때문에, 차종 설정이 없는 것은, 고객으로부터 치수 데이터를 얻지 않으면 제작할 수 없는 상태였습니다.
AC퍼포먼스 라인의 유니버설 호스 (로드 모델) 는 135mm-2460mm (25mm씩) 길이의 호스를 설정하고, 고객의 다양한 리퀘스트에 재빨리, 쉽게 대응할 수 있는 시스템으로 되어 있습니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Feb 10, 2016
I used it for extension from ABSUnit to MASTER.
Helpful?
Mar 14, 2013
Since a Colorful Banjo was not liking, the attached Hose of the Rear brake having been too long, and management having been amusing and an Aluminum were also exchanged for this.Although he wanted to put in the thing of a Stainless Banjo in fact, the Plating & Smoked type here is chosen in Cost.a Plating Banjo -- I think that it is so much equal even if it compares with the beautiful Swage line which carried out and was attached from the first.Although it is just being able to say to other Manufacturers, a Straight and a thing with high prices of Fittings other than 20 degrees are difficulties.
View Detail
Helpful?
Jan 30, 2013
Although it is minor compared with a Good ridge or an Earls something, I think that it is not efficiently inferior.First of all, since a Fitting and Banjoes were made into Aluminum specification, it is businesslike with consumable goods.
View DetailHelpful?
Installed on: SUZUKI GSX1300R HAYABUSA
Nov 7, 2024
I bought it with an existing Hayabusa bolt-on kit, but I bought it again because it was too short to install on a Brembo 16rcs
View DetailHelpful?
Jul 16, 2022
Easy to install and Snap, but is the exterior vulnerable to Fluid?
At first, I was not aware of the ACPerformance line, but when I changed the front and rear of the Grom to Brembo calipers, I decided to go with the Quantity line.:I only chose the product sold in the Set because it happened to be ACPerformance line.
Until now, I have only used Banjo adapter and Hose in one piece.
At first I was a bit confused by the separate screw type Banjo adapter and Hose, and I think I tightened the screws a bit too tight...
I didn't know how much to tighten it, so I over-tightened it and ruined it once, and had to repurchase it.
I'm going to write this much. No?" You may think that this is a good idea, but once you get used to it, on the contrary, it is very convenient when you install the device.
After fixing the Banjo adapter to the MASTER and Caliper at the desired angle, measure the distance between the two and purchase another hose of the correct length to avoid having the adapter too short or too long to handle.
I had to measure the length of the hose that was too short or too long, and then estimate the length of the hose to be just right.
In that sense, I think that having one Hose of a certain length will allow for beautiful Hose handling. I think it is a good idea to have one hose of a certain length.
However, the Hose that leaked the first Fluid is getting cloudy, partly because I didn't rinse it properly after installation, and it seems that Fluid resistance is not so good on the outside...
Helpful?
New Custom Articles
