Front forkTZr on RZ250 (3ma) I purchased this product to equip a Brembo caliper to a vehicle of
The texture is good and fitting is no problem.
I think it looks good with the meat removed.
- Instock
138,387.67 KRW (14,775 엔)
Webike Point: +148 pt
(1,386.21 KRW)
배송정보
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
YAMAHA
Open Fit Model Information Table
-
FZR400RR SP
90-94
-
FZR400RR
90-94
-
FZX750
90-93
-
FZX750
98
전체보기
YAMAHA
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
[프런트용]
재질:알루미늄 2017S (양은 처리)
칼라:실버
대응 캘리퍼:brembo산 40mm
대응 로터:스탠다드 φ 267더블 디스크
부속품:캘리퍼 마운트용 스테인리스 볼트, 0.5mm적 조정
**40mm속도 대응 캘리퍼 지원은 모두 "brembo산 40mm캐스팅 캘리퍼" 에서 설계하고 있습니다. 26.5mm의 오프셋 센터에 있어, AP, NISSIN제의 캘리퍼에 사용하는 경우는 부속의 심에서 조정을 하세요. (6POT캘리퍼에는 대응하지 않습니다.)
*캘리퍼 개체의 제품 오차 수정도 부속의 심이 유효합니다.
*캘리퍼와 로터의 변경으로, 로터라고 패드의 타격 면이 달라집니다 이 경우, 패드의 로터에 해당되지 않는 면을 삭리락토시서 사용하세요.
*캘리퍼 볼트 피치 brembo 40mm:P1.5, brembo 65mm:P1.25, NISSIN:P1.25, TOKICO:P1.25
*brembo산 65mm속도 2PAD캘리퍼에는 사용할 수 없습니다.
*사진은 이미지입니다..
장착 속도가 40mm와 65mm의 캘리퍼를, 스탠더드 로터 사이즈로 조합하기 위한 캘리퍼 서포트.
재질은 알루미늄 깎는 구실로 양은 처리를 할 높은 강도·고 내구성을 확보했습니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Fits:YAMAHA TZR250 89-95, YAMAHA RZ250RR 84-87, YAMAHA RZ250R 88, YAMAHA FZX750 90-93, YAMAHA FZR400RR SP 90-94
Jan 11, 2022
Helpful?
Fits:HONDA CB400SF Version S 96 (Not available after 1997), HONDA CB1100 10-17, HONDA CBR900RR 92-97, HONDA VTR1000F 97-03, HONDA HORNET600 98-03
May 19, 2022
Quality is excellent, but there is a problem with the Position
The quality is excellent and the Brembo caliper comes to the center perfectly without shim without error.
However, note that the Support is much lower than the Normal caliper, so the hose length will be about 5 cm shorter than the Normal. I use Daytona's extended hose.
It looks like AGRASSupport's position is not that different from Normal caliper for less Offset.
Helpful?
Fits:KAWASAKI ZRX1200 DAEG 09-16
Oct 28, 2021
Things are good, but the Bolt that comes with it is not good.
I bought this car to install Brembo caliper.
It has a nice texture and comes with a Shim for Centering out.
Some people don't like wearing Caliper support because it looks like Caliper is hanging down, but I like it a lot.
The supplied Bolt is an ordinary Stainless Steel Bolt with a strength rating of A2-70.
What is A2-70? If you're wondering, look it up. I'm sure it's not a problem because it's made by PartsManufacturer, but I don't think there are many OEM manufacturers that use A2-70 bolts to fix Caliper. So I changed the bolt to a stronger one, but be careful if you change the bolt.
Because it is not a common M10-1.25. Brembo caliper is M10-1.5.
It was Exactly 25mm in length. (bremboP4Casting)
Helpful?
Fits:KAWASAKI ZEPHYR750 91-06, KAWASAKI ZEPHYR400χ 96, KAWASAKI ZEPHYR400 89-95, KAWASAKI Z750 04-06, KAWASAKI GPZ1100 95-99
Aug 9, 2021
Parenthesis by Aluminum Cut-out!
It's so accurate, you can put it on as is, and it comes with a Shim for when you need it.
I highly recommend it.
Helpful?
Fits:KAWASAKI ZRX1200R 01-08, HONDA CB1300SF 98-00, KAWASAKI GPZ900R 99-03 (A12-A16), KAWASAKI ZRX1100 97-00, KAWASAKI ZX-12R 00-03
Aug 4, 2021
I bought these adapters for my front wheel and fork conversion on my Vfr700 rc24.They fitted without any problems. I now have the best brakes I could have on the Vfr
View Detail
Helpful?
New Custom Articles
