I really didn't like the factory-installed steering wheel on my friend's Honda Solo. I suggested that he replace the steering wheel and he agreed. The choice fell on this manufacturer as it has a large selection of handlebars with clear dimensions and many good reviews. The workmanship was pleasantly surprised. Everything went well in terms of size. The new steering wheel turned out to be much more comfortable than the factory one. The appearance of the motorcycle has become much more interesting. We are satisfied!!!
View Detail
- Instock
32,969.52 KRW (3,520 엔)
Webike Point: +35 pt
(327.82 KRW)
배송정보
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
-
CB400SF
99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID)
-
CB400SF
99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
-
CB400SF
08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm)
-
CB400SF
-98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID)
전체보기
HONDA
YAMAHA
-
SR400
01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
-
XJR1300
07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
-
XJR1300
00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
-
TW225E
00- (Disc Brake Car) *Processing of switch hole is required
전체보기
YAMAHA
SUZUKI
-
ST250
-07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
-
RV200 VANVAN
-07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
-
GSR400
-12 *Ask to drill switch holes|* Normal side caps can be used.
-
GRASS TRACKER Big Boy
09-12 (FI car)*You can use stock side caps.
전체보기
SUZUKI
KAWASAKI
-
BALIUS2
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
BALIUS
91-94 *Processing of switch hole required|* Required side cap (for 18mm diameter)
-
ZEPHYRX
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZEPHYR750 RS
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
전체보기
KAWASAKI
Others
Open Fit Model Information Table
-
Universal
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
핸들 칼라:크롬 도금
[운전대 사양]
핸들:철제 블랙/바깥 φ 22.2mm/안지름 φ 18mm
케이블, 호스류는 정상적인 채로 설치 가능
[핸들 크기]
전체 높이:70mm
전폭:680mm
홀더 장착부의 유효 폭:110mm
풀백 사이즈:100mm
내 입 각도:23번
앞으로 기운 각도:100번
*
*사진 중 핸들 클램프 (홀더 또는 포스트) 등은 상품에 포함되지 않습니다.
*사이즈 표기는 수평 때의 것입니다.
*차 검증에 기재된 차체 크기에서 높이±40mm폭±20mm를 넘는 변경이 있는 경우는 구조 변경의 신청이 필요합니다..
케이블 등 옵션 부분 목록은 이쪽
멍키 손잡이 고리는 이쪽
다른 염색은 이쪽
7/8인치 로드 모델의 노멀 핸들 크기 목록
7/8인치 스쿠터/아메리칸 모델의 노멀 핸들 크기 목록
1인치 아메리칸 모델의 노멀 핸들 크기 목록.
일본산. 시작, 장착 확인, 양산, 일관하고 자사에서 관리 히가시오사카에서 오래 기른 기술과 노하우로 소재의 엄선, 몇가지의 연마, 품번의 각인, 고 정밀의 휨 가공, 용접, 고품질인 표면 처리 등 많은 고집이 막힌 핸들 바입니다. 인장 강도에 뛰어난 STKM13A스틸 재료를 사용. JMCA안전 기준치 클리어. 피막이 두꺼운 내구성, 내식성이 뛰어난 트리플 니켈·크롬 도금 (니켈 3층+크롬층) 다듬질.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Fits:KAWASAKI 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder., HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI W400 *Switch hole drilling required|*The direction of the brake banjo needs to be changed. To change the direction, you need to remove the brake hose.
Installed on: HONDA SOLO
Fits:KAWASAKI 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder., HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI W400 *Switch hole drilling required|*The direction of the brake banjo needs to be changed. To change the direction, you need to remove the brake hose.
May 29, 2020
To replace the SR500 OEMLow Handlebar
I bought it to put a Bar end mirror on my SR500
The OEMHandlebar can't be fitted with a bar end because the end is welded shut
I chose this product to make the Handlebar as close to the OEM shape as possible
It is not the Up type of Initial Model, but Low type
It's 10mm longer in width than the OEM, but it's not uncomfortable
The height, pull and droop are the same positional feel as the OEM Low Handlebar
If it is not to attach Bar End, there is no need to replace it
Cables are fine as they are NORMAL
My impressions of its use are still about 200km, but I don't have any problems with it
The motorcycle has always had a lot of vibrations, but switching to a different motorcycle may have made the vibrations even stronger
It's not like my hands are getting tired easily
I'm not saying that the change has made anything better, or that it has made anything better
It's the same as it was with the OEMs
As for the quality, it looks good at the moment
I don't know the long term durability of Rust's stickiness etc
This is a recommendation for those who want to maintain the OEM look and add a Bar End
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
Jan 30, 2022
Just as I imagined, with a lower Handle position!
I put it on my st250, but the OEM handlebar made me look awkward when riding.
The quality is not luxurious, but it feels solid!
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
Apr 24, 2019
Low-eyed, narrow-eyed and Steel
Purchased along with the X11's Pipe Handlebar
I didn't want to change the Position, even though it is made into a bar handle, so I had to take a few steps exactly Choose a Handlebar that measures and reproduces as much of the NORMAL position as possible I did
Position is perfect
And the main reason why we chose this is because of Steel It's not only the strength of the material, but it's also the material itself, so you don't need to add any weight It can reduce microvibrations to some extent
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
May 29, 2013
It attached to ninja400r.Since it is satisfactory as
goods although
drilling process which is inclining forward very much was a little troublesome if compared pure, it is the star 5.
Helpful?
New Custom Articles
