[How is it used?
In Replace from VANVAN200 OEM. For elbow angle and other improvement purposes due to tendonitis. I tried European2 type before this, but it was too narrow and not high enough for me. I tried the European2 before, but it was too narrow and not high enough for me.
Was the one you received as per Image?
Chrome plating is clean and as expected.
Was the installation difficult?
Accuracy is good, no particular problems.
How was your experience with it?
VANVAN, but personally, I think it is important to have an Adventure type? w maneuverability and to be able to swing it around from the Front to some extent, but if it is too wide, it will be Minus in terms of tendonitis measures. So the best balance between the two was this for me:Handlebar width 740mm. The handlebar width is 740mm, and the handlebar height is 700mm, which is a difference of 20mm on the One Side.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I thought it was too "Up" in terms of image and looked tacky, but I thought it was fine for VANVAN. If you are looking for practicality, I think it is the best.
As I mentioned in my review of another Handlebar Brace, I was having trouble finding the correct width for the HURRICANE Handlebar Brace that I installed at the same time. Since they are from the same manufacturer, it would be great if you could just list the typical brands that are compatible with the HURRICANE Handlebar Brace.
- Instock
38,261.5 KRW (4,085 엔)
배송정보
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
MONKEY
84-07 (Z50J-1600008-,AB27-1000001-1899999)*Requires top bridge H30 holder or MONKEY handlebar holder|*Requires throttle cable routing change.
-
FTR223
(with side numbers) *Processing of switch holes required
-
GRASS TRACKER Big Boy
09-12 (FI cars)*Drilling of switch hole is required. |*You need to change the clutch cable.
-
GRASS TRACKER Big Boy
-08 (Carburetor)*Side caps can be used as stock.
-
GRASS TRACKER
09-12 43355(FI models)*Processing of switch hole is required|*You can use the normal side cap. |*The clutch cable needs to be changed.
-
GRASS TRACKER
-08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
-
Universal
Product detail
핸들 칼라:크롬 도금
[운전대 사양]
핸들:철제 블랙/바깥 φ 22.2mm/안지름 φ 18mm
케이블, 호스류는 정상적인 채로 설치 가능
[핸들 크기]
전체 높이:175mm
전폭:740mm
홀더 장착부의 유효 폭:130mm
풀백 사이즈:185mm
내 입 각도:25번
앞으로 기운 각도:70번
*
*사진 중 핸들 클램프 (홀더 또는 포스트) 등은 상품에 포함되지 않습니다.
*사이즈 표기는 수평 때의 것입니다.
*화상에는 다른 염색/ 다른 타입이 포함되어 있는 경우가 있습니다..
케이블 등 옵션 부분 목록은 이쪽
멍키 손잡이 고리는 이쪽
7/8인치 로드 모델의 노멀 핸들 크기 목록
7/8인치 스쿠터/아메리칸 모델의 노멀 핸들 크기 목록
1인치 아메리칸 모델의 노멀 핸들 크기 목록.
일본산. 시작, 장착 확인, 양산, 일관하고 자사에서 관리 히가시오사카에서 오래 기른 기술과 노하우로 소재의 엄선, 몇가지의 연마, 품번의 각인, 고 정밀의 휨 가공, 용접, 고품질인 표면 처리 등 많은 고집이 막힌 핸들 바입니다. 인장 강도에 뛰어난 STKM13A스틸 재료를 사용. JMCA안전 기준치 클리어. 피막이 두꺼운 내구성, 내식성이 뛰어난 트리플 니켈·크롬 도금 (니켈 3층+크롬층) 다듬질.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Fits:SUZUKI GRASS TRACKER Big Boy 09-12 (FI cars)*Drilling of switch hole is required. |*You need to change the clutch cable., HONDA FTR223 (with side numbers) *Processing of switch holes required, Others Universal, SUZUKI GRASS TRACKER 09-12 43355(FI models)*Processing of switch hole is required|*You can use the normal side cap. |*The clutch cable needs to be changed., SUZUKI GRASS TRACKER -08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
May 29, 2022
Fits:SUZUKI GRASS TRACKER Big Boy 09-12 (FI cars)*Drilling of switch hole is required. |*You need to change the clutch cable., HONDA FTR223 (with side numbers) *Processing of switch holes required, Others Universal, SUZUKI GRASS TRACKER 09-12 43355(FI models)*Processing of switch hole is required|*You can use the normal side cap. |*The clutch cable needs to be changed., SUZUKI GRASS TRACKER -08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
Nov 9, 2019
Just the right Handlebar Up Type
The CB750KZ's OEM Handlebar is pulled large in front and has a strong aperture The shape is similar to the shape of the so-called "Handlebar" of White Bay Generally speaking, it is an easy position, but it is a little bit hard for Small students who have an elbow joint pain was a hard angle So I wanted to change the handlebar with the easy position as it is I changed to HURRICANE European 4 which is similar in width As I expected, the load of the elbow is reduced, but the position change is bigger than I expected
View DetailNew Custom Articles
