The Handlebar is squeezed for better control. This is a recommendation because of its low price.
View Detail
49,201.38 ~ KRW (5,253 엔) 50,578.24 KRW Save 3%
Webike Point: +53~ pt
(496.41 KRW)
배송정보
-
Please select product form first.
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
소재:철제
핸들 크기:Φ 7/8인치 (22.2mm)
안지름:φ 18mm
전체 높이:60mm
전체 폭:685mm
**장착 영상은 이미지에요..
기존의 콘도르 핸들에서는 조리개가 힘들고 핸들 스톱퍼를 달지 않자 탱크에 간섭했다...
앞으로 조금 낮으면 케이블도 교환하지 않고 설치한 것에...
등의 목소리에 조금이라도 설 수 있도록 새 형상 설정하였습니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Nov 29, 2020
Change from Wide Pipe Handlebar
The V7?OEMPipe Handlebar is wide and has a shallow aperture for Europeans, and my shoulder hurts when I ride it, etc. I was thinking of replacing it from early on. "V7?Racer. The OEMSeparate Handlebars, which are standard equipment at HURRICANE, are too expensive and I didn't want to use them. The price of the OEMSeparate Handlebars by Standard Equipment is high and I did not like the price of the OEMSeparate Handlebars by HURRICANE. The price is very reasonable and the fact that it is made in Japan makes me feel good.
SWCondor is A little (S) wide (W) What I felt after 500km of driving after the change was a large decrease in fatigue of the shoulders, fun in Winding and an increase in the sense of unity with the vehicle. I think that the position of the Handlebar, which is large compared to the OEM, has not been lowered. "V7?Racer. It seems to be in the slightly Up and shorter Handle position than the other models. I guess the important thing is the width and aperture for the length of the limb. By the way, my height is 170cmJUST and my limb length is average or a little shorter than that.
This is a recommended handlebar for those who feel uncomfortable with the V7's OEM handlebar (too wide, too shallow, etc.). I asked the shop to make a Switch box mounting hole for it. Tension of the Cables which was uneasy also had no problem, and the extent to which the deflection increased in the Accelerator Wire was done to some extent.
Helpful?
Nov 28, 2020
We were able to install it without changing the wires.
It is easy to cut the Handlebar at a good angle.
Naturally, this is not a product exclusive to any vehicle, so you will need to drill holes to fix your switches.
Helpful?
Nov 28, 2020
Position is now easier
It took me a while to install it, but I managed to do it.
The weld spatter at the bottom of the weld was painted without finishing it.
It looks very bad in that area.
Whenever you have time, you can scrape off the sputtering morsels.
I'm thinking of repainting it.
Helpful?
Oct 22, 2020
When I received it, it was different from Image.
I received the product and decided not to use the SWCondor because I felt that the current Posh Conti was somehow better.
Helpful?
New Custom Articles
