Finally installed it on my z125! It changed my bodyposition and gave me more room when tucked in. Excellent product with great workmanship.
View Detail
- 세일
58,937.11 ~ KRW (6,289 엔) 63,725.93 KRW Save 8%
Webike Point: +63~ pt
(590.4 KRW)
배송정보
-
Please select product form first.
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
스위치 구멍 붙이 전용형
소재:철제
노멀보다 포지션:70mm다운 70mm전방
볼트 온
*
*핸들 안지름 φ 18mm용 사이드 캡이 별도 필요합니다.
*화상에는 다른 염색/ 다른 타입이 포함되어 있는 경우가 있습니다..
하락시켜도 갑갑하지 않고 전에 오프셋
노멀보다 자리 70mm다운 70mm전방에
스위치 구멍 가공 후
볼트 온
케이블, 호스류는 정상적인 채로 OK
GROM (2016) 에 설치하는 경우
브레이크 호스의 밴조의 방향을 화상 3처럼 앞에 변경하는 것으로 설치 가능하지만, 호스가 미터 앞을 지나게 됩니다.
설치하는 경우는 스위치 구멍 가공된 설정은 없으므로 범용 타입에 구멍 가공이 필요합니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Fits:KAWASAKI Z125 PRO 16-21
Installed on: KAWASAKI Z125 Pro
Fits:KAWASAKI Z125 PRO 16-21
Mar 5, 2021
I received the item in good order. Delivery was slightly longer than normal(about 3 weeks), perhaps because of the pandemic situation. But that is totally understandable. Nevertheless, the product was properly wrapped with bubble wrap to insulate it from any damage and packaged in a box. The handlebars looks to be of good quality (I have not put it on my bike yet) and is lightweight.
View DetailHelpful?
Fits:KAWASAKI Z125 PRO 16-21
Jul 17, 2018
It is z125Series of Design which contracted z1000, but with STD Handlebar, it was feeling that UP Han passed over a bit and I felt a little floating and when I first got on it I picked up too much rut on the road surface and Handlebar took a handful I decided to exchange so I decided to exchange.
Although exchange is possible even for one person, it is an important part of the operation system so it may be good to ask a shop with a detailed person. Once experienced I never Large ...
Grip used the other Brand Product because the adhesive was powerful, so I prepared the Other Brand Product and Bar End was cheap like just plugged in.
Wires etc. are portable as it is NORMAL, but it seems better to adjust the orientation of Brake's Banjo bolt.
As Clutch Wire also turns protected by the Gold genus, it becomes a feeling that it will be affected by Meter's Button due to the inclination of Handlebar, please adjust the position of Clutch wire holder.
After swapping Handlebar was the best without wandering. Although it will be a little leaning forward, since it was Racer replica that was on board before purchasing this type of vehicle, it seems that Handlebar is not too low, and the appearance of the entire body has also tightened.
I bought this Handlebar around just after release and used it for about 1 year, but the welding part's Plating seems to be weak and some rust has come out.
Cleaning is difficult because it is a dented place, but I think Piece cleaning and observation are necessary.
Helpful?
New Custom Articles
