These are straight forward to fit, although I noticed a little gap(a couple mm at most) between the bar-end & the oem grips. These feel a little lighter in the hand than the oem bar-ends (sorry I didn't weigh them to compare) but it dosent seem to cause any noticeable issues whatsoever. Overall, a great looking product, I'm happy with them.
View Detail
65,807.9 ~ KRW (7,026 엔)
Webike Point: +70~ pt
(655.64 KRW)
배송정보
-
Please select product form first.
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
■ 롱 타입
[치수] Φ35
[입 수] 좌우 1세트
**년식/사양지 등에 따라 적합 차종이 다를 수 있습니다. 반드시 실차에서 적합을 확인해 주십시오.
*틈새 조정이나 부속 볼트길이의 변경을 필요로 하는 경우가 있습니다.. 스페이서를 추가한 경우에는 설치 볼트도 연장해 주십시오.
*나사 지름만을 합친 업체인 차종을 참고로 기재하고 있습니다. 꼭 실제 차량에서 확인하십시요.
*롱 이너 웨이트의 경우 길이 조정 (커트) 가 필요한 경우가 있습니다. (깊이 140mm이하)
> 스로틀 조작에 방해가 되지 않도록 빈틈 조정을 반드시 해 주십시오.
*화상에는 다른 색깔이 포함되어 있는 경우가 있습니다.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다..
* 이미지는 참조용입니다. 이미지는 실제 상품과 다를수 있습니다.
슈퍼 스포츠 머신으로부터 네이킷도 바이쿠까지, 빅 오토바이에 어울리는 핸들바 앤딩입니다.
경량 알루미늄 합금 각색 또는 진동 대책용으로 중량이 있는 스테인리스 합금 (SUS) 를 이용하여 보다 첨단에 쥬라 공을 박은 대경 Φ 35mm입니다.
진동이 큰 오토바이에는 롱 이너 웨이트 타입도 있습니다.
기호에 맞추어 고르십시오.
원주부는 섬세한 롤렛을 새겨 제품에 표정을 줍니다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Installed on: KAWASAKI Z900RS
Jul 28, 2022
Exactly for the first time Custom
Very beautifully finished Bar End.
The weight and quality are all above the price.
Helpful?
Jul 18, 2022
race ish for vibration control!!!!!!!!!!!!!!!!!!!!!!!!!!!
Stainless SteelCut-out at Handlebar End is installed.
After consulting with Shop, we left the work to them.
According to Engineer. The glue on the OEM bar end of the kawasaki was so sticky that replacing it was always Large and odd." The stainless steel cut-outs have a solid weight and are perfectly functional as a vibration countermeasure.
It is also impressive as one point around the Handlebar.
And kawasaki... Adaptation M8-Concave (KAWASAKI) Please note that the
Helpful?
Jul 16, 2022
The shape is stylish and the parenthesis is nice, but it is a bit light, so when I installed it on my ZX25R, the vibration made my hand numb, so I put it in storage. I installed it on my MONKEY125 for commuting. The shape is different, so I put a washer over it and installed it.
View DetailHelpful?
May 1, 2022
[How is it used?
Whenever you grip the Handlebar, you will see it.
Was the one you received as per Image?
Gold color is very good. The texture is wonderful. As expected from Babyfe.
Was the installation difficult?
Anyone with tools can put it on.
How was your experience with it?
It does not have a Weight in it, so it is not a good vibration protection. It is completely visible and has a semi-absent presence.
[Included Parts:were they on?
Bolt、Sticker
[Was there anything that disappointed you?
Nothing in particular. Not cheap, but satisfactory.
Other items that would be helpful
Point and hang of installation
Bolt should be tightened while holding down the grip end, since the bolt will spin out when tightened.
[ITEMS TO BUY TOGETHER
You can replace the Grip anyway.
Helpful?
New Custom Articles
