I got this from a friend of mine for my 2007 WR250X with the sx3 bar MX415, and although the Design and Aluminum quality of this Clamp is good, the height is 10? higher than OEM.
I don't recommend it for MOTARD because it made Handling quite sluggish.
If you want to raise the height of the Handlebar a little, it will fit.
56,594.25 KRW (6,039 엔) 59,977.34 KRW Save 6%
Webike Point: +60 pt
(562.28 KRW)
배송정보
Out of stock at the manufacturer.
FITMENT
YAMAHA
-
WR250RX
07-17
-
WR250R
07-17
-
WR250X
07-20
-
WR250R
07-20
KAWASAKI
Open Fit Model Information Table
-
KLX230R
20-21 *The handlebar mounting position is 10mm higher than stock.
-
KLX230
20-21 *The handlebar mounting position is 10mm higher than stock.
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
■대경바 (28.6mm) 로의 변환용
■ 전후 3단계 조정 (4mm/0mm/4mm)
**순정보다 핸들바 부착 위치가 10mm 올라갑니다.
*키 변경에는 대응하지 않습니다.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다..
* 이미지는 참조용입니다. 이미지는 실제 상품과 다를수 있습니다.
라바 올리기 톱 클램프에서 스탠더드 바 (22.2mm) 를 채용하는 차량에 대경 바 (28.6mm) 를 장착하기 위한 2부분 핸들 버크 램프 키트.
특수 전용 볼트의 채용으로, 중심 (0) , 중심에서 플러스 4mm·마이너스 4mm전후 3단계의 위치 조정이 가능하다.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
Fits:YAMAHA WR250RX 07-17, YAMAHA WR250R 07-17, KAWASAKI KLX230R 20-21 *The handlebar mounting position is 10mm higher than stock., KAWASAKI KLX230 20-21 *The handlebar mounting position is 10mm higher than stock., YAMAHA WR250R 07-20
Dec 11, 2021
The texture is good but the height is 10? higher than OEM.
Helpful?
Fits:SUZUKI RMZ250 05-06, KAWASAKI KX450F 06-18, KAWASAKI KX250F 05-18, KAWASAKI KX450 19-21, KAWASAKI KX250 19-21
Nov 13, 2024
Works pretty well on the Kawasaki Z900RS
This part isn't officially compatible with the Kawasaki Z900RS but i saw someone on Instagram use it and really liked the design, so decided to risk it. The part looks great and fits the bike well although it drops the bar down pretty low. Coz of this, some adjustment will be needed to make sure the controls or the throttle cable tubing doesn't hit the tank when the bars are fully locked to the left or right.
View Detail
Helpful?
Fits:SUZUKI RMZ250 05-06, KAWASAKI KX450F 06-18, KAWASAKI KX250F 05-18, KAWASAKI KX450 19-21, KAWASAKI KX250 19-21
Jan 19, 2020
I wanted to install the Taper Handlebar on the KLX125, although it's not a compatible car model purchase
If you worked out how to install the included Washer, it came on normally
The texture is good
Price-wise, it's reasonable
Helpful?
Fits:YAMAHA WR250RX 07-17, YAMAHA WR250R 07-17
Mar 27, 2016
I got lost as YZOEMClamp - - -
WR250R / It depends on Top Bridge shape of X
Handlebar height will be raised by biting Aluminum spacer.
Since Nut of Reverse side also has Aluminum spacer, installation is a little troublesome.
BodyVolume There is a reasonable weight, but 3-position (After front center) There is a benefit of choosing.
Helpful?
Fits:YAMAHA WR250RX 07-17, YAMAHA WR250R 07-17
Feb 15, 2016
Although there is no height adjustment in the photographs and explanations, in fact the Spacer about 1 cm came under Clamp, so compatibility with MOTARDMedium of sx 3 Handlebar was not so good and it was necessary to handle Wire classes! Clamp It is perfect for itself! If it says strong, it is Aluminum spacer of about three kinds by height, depending on the height. For example, Limit's 5 mm which does not interfere with Stem Nut and 2 centimeters when you want to up 1 centimeter of the current attachment up to Large 3. If you can do something like 5 centimeters up, it seems to be a better item.
Helpful?
New Custom Articles
