An Oil cooler is purchased towards summer.The
color chose the Black.
The Parenthesis by the calm touch is good.
A close contest was merely faced in the relation of the form of a Muffler to management of a Hose.
Only a Hose is purchased and adjusted separately.
759,113.76 KRW (81,047 엔) 833,604.26 KRW Save 9%
Webike Point: +810 pt
(7,586.73 KRW)
배송정보
-
Please select product form first.
아래 상품 설명은 Google에 의해 자동으로 번역됩니다.
Product detail
Hose routing:Stock
Thermo Kit: Not available
[hose fitting data]
・Long hose (core side: 90° / out side: Straight)
・Short hose (core side: 90° / out side: Straight)
[Set components]
・Oil cooler core
・Hose
・Bracket
・Extraction
**Install the oil line so that it does not come into contact with the engine or exhaust.
*The setting is based on the stock exhaust.
*Radiator bracket or down tube is required for installation.Please prepare separately.
*The side cowl and under cowl cannot be installed.
*Stock exhaust can not be installed.
*When installing with the Big Radiator Kit, please use the special oil cooler kit..
* 이미지는 참조용입니다. 이미지는 실제 상품과 다를수 있습니다.
[round oil cooler]
Active Alls Round Oil Cooler with light weight, compact size and high performance.
Not only the fitting but also the core itself is made by Earl's, a reliable and proven company.You can experience thin, lightweight and high performance.
A wide range of core sizes and colors are available.Please select the one that best suits your vehicle.
[Product Features]
(1) Improving cooling effect by 35% compared to straight cores!
(2) Front projection area reduced by approx. 7% compared to a straight core of the same inch and the same number of stages
(3) The weight is also significantly reduced by about 40 percent with convesion of compactness compared to a straight core of the same inch and the same number of stages!
[Color]
Two colors lineup to choose from (silver / black)
[core (EARLS)]
If the cooling air entering from the front of the core can be smoothly released to the rear, the cooling effect will inevitably be improved.
At first glance, it is often thought that a thicker core has a higher cooling rate, but if the ventilation is poor, heat accumulation is easily induced and it is counterproductive.
This round core has a thin thickness to improve ventilation and achieve a high cooling rate.
주의
* 사용 설명서가 포함되어있는 경우, 일본어로 표기됩니다.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
고객 구매후기
Reviews with image
![[Webike Monitor] The external Oil cooler of the wish was got lately [ ]!! <br> <br> It does not get bored, seeing the air conditioner Core of loose Round form.Since what was purchased is a Kit corresponding to a Thermostat, a total of four Oil hoses is att](https://img.webike-cdn.net/photo/article/52/1374130518052M.jpg)
![The CB400SF specifications III are equipped. <br>It is not attachment Ho especially difficult for the direction made by itself, either, and admiration comes out custom very. [ oil change ] <br>I think that the directions of an effect are parts saved consid](https://img.webike-cdn.net/photo/article/91/1234946189491M.jpg)
Fits:KAWASAKI GPZ750R , KAWASAKI GPZ900R 84-03 (A1-A16)
Jul 10, 2012
Helpful?
Fits:KAWASAKI ZEPHYR400χ 96-08, KAWASAKI ZEPHYR400 89-95, KAWASAKI ZEPHYR750 91-06, KAWASAKI ZEPHYR750RS 91-06, KAWASAKI ZR-7
Jan 30, 2021
[Contents] I had bought the Conical Seal of ACTIV separately because it was not written in the book, but when the product arrived and I opened the package, the Conical Seal of Earls was enclosed. I was very impressed with the thoughtfulness!
View Detail
Helpful?
Sep 13, 2020
It is a bit wider and lower in height than the NORMAL Oil cooler, but it seems to be cooler and more efficient than the NORMAL Oil cooler because of the 10-stage Core and its thinness.
The Oil Temperature Meter seems to show a definite temperature drop of 10 degrees Celsius below NORMAL and it is cold.
This means that in the winter, you may have to worry about overcooling in reverse.
One thing to be aware of when installing is the additional Washer on the Right Side?
It would have been nice to have a neatly written order of installation.
I also installed a Core guard to prevent the Core from being damaged by the Small stone.
Helpful?
Sep 9, 2020
I've been wanting one for a long time.
Why did I buy it? Parenthesis. It comes down to this
I don't know about the cooling effect or anything, but I'm sure it's up.
When you buy it, you can choose the Size from 11 inch 13-dan, 9inch 13-dan and 9inch 10-dan, but I don't understand the image of this....
I chose the 9Inch 13-stage. I'll post a picture so you can see it for yourself.
The price is a bit pricey, but I believe that Parenthesis became better for it.
I don't know, I had a motorcycle shop do the installation, but there didn't seem to be any problems.
Helpful?
Fits:YAMAHA XJR400R II 96, YAMAHA XJR400R 95-07, YAMAHA XJR400 93-96
Apr 28, 2020
I bought this because my OEM Oil cooler had a Crack in it and it was beyond repair! It was The price is the price, so it's hard to get a handle on it, but I'm glad I got a custom look to it I think So far I've only run it in the winter, but I haven't had any over cool, oil leaks, etc., and I've been able to get the Oil It's performing well as a cooler, so I'm looking forward to its next performance in the summer! Hey Also, in terms of installation, the XJR400R (2006) has the exhaust pipe removed If you don't have it, it's very difficult to wear it, so I had to use it alone It is easy to install as long as you follow the instruction manual
View DetailHelpful?
New Custom Articles
